{"title":"Unglued Veneer Edging","description":"\u003ch2\u003eUnglued Veneer Edging\u003c\/h2\u003e\n\u003cp\u003eChoose unglued real wood veneer edging when you want to select the adhesive and application method for the substrate, workshop process and intended interior finish. This collection brings together flexible veneer edging rolls supplied without pre-applied adhesive.\u003c\/p\u003e\n\u003ch3\u003eWhy Choose Unglued Veneer Edging?\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelect an adhesive suited to the veneer and substrate\u003c\/li\u003e\n\u003cli\u003eUse the application method that fits your workshop process\u003c\/li\u003e\n\u003cli\u003eCover furniture and cabinet edges with natural wood\u003c\/li\u003e\n\u003cli\u003eUse narrow veneer rolls for repairs, refurbishment and interior joinery\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePreparation and Application\u003c\/h3\u003e\n\u003cp\u003eCheck the individual listing for the exact timber appearance, width and roll length. Prepare the receiving edge so it is clean, dry, smooth and stable, then choose a compatible veneer adhesive for the veneer and substrate.\u003c\/p\u003e\n\u003cp\u003eTest the complete veneer, adhesive, substrate and finishing system on an offcut before starting the finished component. Apply even pressure and follow the adhesive manufacturer’s instructions for coverage, open time, pressure and curing.\u003c\/p\u003e\n\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\n\u003cp\u003eReal wood veneer varies naturally in colour, grain, figuring and marking. Plan the layout before bonding when grain direction or close colour matching is important. Product photographs are representative.\u003c\/p\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch3\u003eWhat does unglued veneer edging mean?\u003c\/h3\u003e\n\u003cp\u003eUnglued veneer edging is supplied without pre-applied adhesive. You select a suitable adhesive and application method for the veneer, substrate and intended interior use.\u003c\/p\u003e\n\u003ch3\u003eWhat can unglued veneer edging be used for?\u003c\/h3\u003e\n\u003cp\u003eIt can be used for exposed furniture and cabinet edges, interior panels, repairs, refurbishment and joinery where the strip and chosen bonding system are suitable.\u003c\/p\u003e\n\u003ch3\u003eCan I use my preferred adhesive?\u003c\/h3\u003e\n\u003cp\u003eYou can select an adhesive that is compatible with the veneer and receiving substrate. Test the complete system first and follow the adhesive manufacturer’s instructions.\u003c\/p\u003e\n\u003ch3\u003eWill every roll look identical?\u003c\/h3\u003e\n\u003cp\u003eNo. Genuine wood varies naturally in shade, grain and figuring, so adjoining pieces may not be identical.\u003c\/p\u003e\n\u003ch3\u003eRelated Veneer Products\u003c\/h3\u003e\n\u003cp\u003eFor heat-activated edging, browse our \u003ca href=\"\/collections\/iron-on-veneer-edging\"\u003eiron-on veneer edging\u003c\/a\u003e. For large-format sheets, view our \u003ca href=\"\/collections\/flexible-wood-veneer-sheets\"\u003eflexible wood veneer sheets\u003c\/a\u003e collection.\u003c\/p\u003e","products":[{"product_id":"ash-fs-unglued-flexible-wood-veneer-30mm-x-100m","title":"VENEER FSHM ASH 30x100m UNGLUED","description":"\u003ch2\u003eAsh Flexible Wood Veneer FS Unglued 30mm x 100m\u003c\/h2\u003e\u003cp\u003eAsh Flexible Wood Veneer FS Unglued 30mm x 100m is a decorative real wood veneer roll designed for cabinet edging, furniture repairs, shelving, door edges, trims and detailed joinery work.\u003c\/p\u003e\u003cp\u003eAsh is valued for its pale natural colour, visible grain and clean hardwood appearance. It is commonly used in furniture, cabinetry, panels and interior joinery where a light timber finish with attractive grain character is required.\u003c\/p\u003e\u003cp\u003eThe 30mm width makes this veneer suitable for wider board edges, cabinet parts, shelf edges, drawer fronts, door edges, trims and repair sections where more coverage is needed. Supplied in a 100m roll, it is practical for workshop use, repeated edging work and production applications.\u003c\/p\u003e\u003cp\u003eThis veneer is supplied \u003cstrong\u003eunglued\u003c\/strong\u003e — the back is fleeced for flexibility and the front face is sanded smooth, but no adhesive has been applied to the reverse. This gives you full control to choose the most suitable bonding method for your substrate and process, whether that is contact adhesive, PVA, specialist veneer glue or press bonding.\u003c\/p\u003e\u003cp\u003eIt can be used to upgrade plain board edges, match existing ash or light timber finishes, repair worn edging or add a real wood appearance to fitted furniture and decorative panels.\u003c\/p\u003e\u003cp\u003eSuitable applications include cabinet edging, furniture restoration, shelving, drawer fronts, door edges, shopfitting, display units, decorative trims, panel finishing and bespoke joinery manufacture.\u003c\/p\u003e\u003cp\u003eOnce applied, this veneer edging accepts stain, lacquer, wax and oil finishes, allowing you to enhance or adjust the natural ash colour to suit your project.\u003c\/p\u003e\u003cp\u003eFor best results, apply to a clean, dry, flat and stable surface using a suitable veneer adhesive. Always check grain direction, surface preparation and adhesive compatibility before final application.\u003c\/p\u003e\u003ch3\u003eWhat Does FS Mean?\u003c\/h3\u003e\u003cp\u003eFS stands for \u003cstrong\u003eFleeced and Sanded\u003c\/strong\u003e. The back of the veneer is fleeced for flexibility and stability, and the front face is sanded to a smooth, consistent finish. This product is supplied \u003cstrong\u003eunglued\u003c\/strong\u003e — no hot melt or pre-applied adhesive is on the reverse. When trimming after application, \u003cstrong\u003ethe cut follows the blade rather than the grain\u003c\/strong\u003e, giving a clean, controlled finish.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat is Ash FS Unglued 30mm veneer used for?\u003c\/h4\u003e\u003cp\u003eIt is used for cabinet edging, furniture repairs, shelf edges, drawer fronts, door edges, trims and decorative joinery work.\u003c\/p\u003e\u003ch4\u003eWhat does unglued veneer mean?\u003c\/h4\u003e\u003cp\u003eUnglued veneer does not have a pre-applied adhesive backing. You apply your own adhesive — such as contact adhesive, PVA or specialist veneer glue — to suit your process and substrate.\u003c\/p\u003e\u003ch4\u003eIs the 30mm width suitable for wider board edges?\u003c\/h4\u003e\u003cp\u003eYes. The 30mm width is suitable for wider board edges, shelves, doors, drawer fronts and cabinet parts where extra coverage is required.\u003c\/p\u003e\u003ch4\u003eCan it be stained, lacquered, waxed or oiled?\u003c\/h4\u003e\u003cp\u003eYes. Once applied, this veneer edging accepts stain, lacquer, wax and oil finishes, so you can enhance or adjust the natural ash colour to suit your project.\u003c\/p\u003e\u003ch4\u003eWhat size is this veneer roll?\u003c\/h4\u003e\u003cp\u003eThis listing is for a 30mm wide x 100m long flexible ash wood veneer roll.\u003c\/p\u003e\u003ch4\u003eCan it be used for furniture restoration?\u003c\/h4\u003e\u003cp\u003eYes. It can be used to restore or improve light timber furniture and panel edges, provided the surface is clean, dry, stable and suitable for veneer bonding.\u003c\/p\u003e","brand":"SMC WHOLESALE","offers":[{"title":"Default Title","offer_id":62849800569181,"sku":"VEN026C","price":30.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN026C.jpg?v=1784618598"},{"product_id":"birch-flexible-wood-veneer-fs-unglued-22mm-x-100m","title":"Birch Flexible Wood Veneer FS Unglued 22mm x 100m","description":"\u003cp\u003eBirch Flexible Wood Veneer FS Unglued 22mm x 100m is a real wood veneer edging roll designed for furniture production, cabinet making, shelving, repairs and detailed interior joinery.\u003c\/p\u003e\u003cp\u003eBirch has a naturally pale, clean appearance with a fine, even grain. Its understated timber character makes it particularly suitable for contemporary furniture, light-coloured cabinetry and projects where a smooth, consistent wood finish is required.\u003c\/p\u003e\u003cp\u003eThe 22mm width is well suited to covering the exposed edges of common furniture boards, panels, shelves, cabinet components, drawer fronts and door sections. Supplied in a generous 100-metre roll, it is a practical option for workshops, manufacturers, furniture repairers and professional joiners completing repeated edging work.\u003c\/p\u003e\u003cp\u003eThis veneer is supplied without a pre-applied adhesive, allowing the installer to select an adhesive appropriate for the board material, production method and intended application. Once fitted, the veneer can be trimmed, lightly sanded and finished with compatible oils, stains, lacquers or clear coatings.\u003c\/p\u003e\u003ch3\u003eWhat Does FS Mean?\u003c\/h3\u003e\u003cp\u003eFS stands for Fleeced and Sanded. The back of the veneer is fleeced for flexibility and stability, and the front face is sanded to a smooth, consistent finish ready for application. This product has no pre-applied adhesive — a separate adhesive must be used during installation.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine birch wood veneer surface\u003c\/li\u003e\n\u003cli\u003ePale natural colour with a fine, even grain\u003c\/li\u003e\n\u003cli\u003eFlexible construction for straight and gently shaped edges\u003c\/li\u003e\n\u003cli\u003eUnglued backing for use with a suitable separate adhesive\u003c\/li\u003e\n\u003cli\u003eSuitable for cabinet making, furniture production and repairs\u003c\/li\u003e\n\u003cli\u003eCan be trimmed, sanded and finished after application\u003c\/li\u003e\n\u003cli\u003eLong 100-metre roll for workshop and production use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eShelving and furniture-board edges\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and door edges\u003c\/li\u003e\n\u003cli\u003eFurniture restoration and repairs\u003c\/li\u003e\n\u003cli\u003eInterior panels and joinery components\u003c\/li\u003e\n\u003cli\u003eConcealing exposed plywood, MDF or chipboard edges\u003c\/li\u003e\n\u003cli\u003eMatching birch-faced furniture and cabinetry\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eProduct Specification\u003c\/h3\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct type\u003c\/td\u003e\n\u003ctd\u003eFlexible real wood veneer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTimber species\u003c\/td\u003e\n\u003ctd\u003eBirch\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVeneer style\u003c\/td\u003e\n\u003ctd\u003eFS Unglued\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e22mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRoll length\u003c\/td\u003e\n\u003ctd\u003e100 metres\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdhesive backing\u003c\/td\u003e\n\u003ctd\u003eUnglued\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eNatural unfinished wood\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eFurniture, cabinetry and joinery edging\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch3\u003eInstallation Guidance\u003c\/h3\u003e\u003cp\u003eEnsure the receiving surface is clean, dry, smooth and free from dust, grease or loose material. Apply a suitable adhesive evenly in accordance with the adhesive manufacturer's instructions, position the veneer carefully and press it firmly into place.\u003c\/p\u003e\u003cp\u003eOnce the adhesive has cured, trim away any excess material using an appropriate veneer trimmer or sharp cutting tool. The surface can then be lightly sanded and finished to complement the surrounding timber or board surface.\u003c\/p\u003e\u003cp\u003eAs birch is a natural material, variations in grain, shade and figure should be expected between rolls and production batches.\u003c\/p\u003e","brand":"MERENDA LTD","offers":[{"title":"Default Title","offer_id":62849800929629,"sku":"VEN030A","price":17.13,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN030A.jpg?v=1781949239"},{"product_id":"oak-flexible-wood-veneer-fs-unglued-22mm-100m","title":"VENEER FS UNGLUED OAK 22x100m","description":"\u003cp\u003e\u003cstrong\u003eOak Flexible Wood Veneer FS Unglued 22mm × 100m\u003c\/strong\u003e is a genuine real-wood edging roll designed to provide exposed furniture-board edges with the warm colour, natural texture and distinctive grain of Oak.\u003c\/p\u003e\u003cp\u003eThe veneer is fleeced and sanded but supplied \u003cstrong\u003ewithout a factory-applied adhesive\u003c\/strong\u003e. This gives furniture manufacturers, cabinet makers and professional workshops complete control over the adhesive and bonding process used for their particular substrate, equipment and production requirements.\u003c\/p\u003e\u003cp\u003eAt 22mm wide, the edging is particularly suitable for common 18mm furniture panels because it leaves a small trimming allowance on both faces. The 100m roll supports repeated workshop and production use.\u003c\/p\u003e\u003ch3\u003eWhat Does FS Mean?\u003c\/h3\u003e\u003cp\u003eFS means \u003cstrong\u003eFleeced and Sanded\u003c\/strong\u003e. A supporting fleece improves the veneer’s flexibility and stability, while the natural Oak face is sanded to provide a smooth surface for finishing.\u003c\/p\u003e\u003cp\u003eUnlike FSHM veneer, this FS product does not include a hot-melt adhesive layer. A compatible adhesive must be selected and applied separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural Oak veneer surface\u003c\/li\u003e\n\u003cli\u003eFleeced backing for improved flexibility and stability\u003c\/li\u003e\n\u003cli\u003ePre-sanded real-wood face\u003c\/li\u003e\n\u003cli\u003eSupplied completely unglued\u003c\/li\u003e\n\u003cli\u003eAllows control over adhesive selection and application\u003c\/li\u003e\n\u003cli\u003e22mm width suited to many standard furniture panels\u003c\/li\u003e\n\u003cli\u003e100m roll for repeated workshop or production use\u003c\/li\u003e\n\u003cli\u003eCan be trimmed and finished after bonding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for Standard Panel Edges\u003c\/h3\u003e\u003cp\u003eThe 22mm width provides useful trimming allowance when applied to many 18mm MDF, chipboard, plywood and veneered furniture panels. Once bonded securely, the small overhang can be trimmed flush with the panel faces.\u003c\/p\u003e\u003cp\u003eAlways confirm that the substrate, adhesive and pressing method are compatible before beginning production.\u003c\/p\u003e\u003ch3\u003eWhy Choose Unglued Oak Veneer?\u003c\/h3\u003e\u003cp\u003eUnglued veneer gives the user flexibility to choose a bonding system appropriate for the substrate and manufacturing process. This can be useful for workshops operating an edge-banding machine, using a specialist woodworking adhesive or working with panels that require a particular bonding method.\u003c\/p\u003e\u003cp\u003eThe absence of a pre-applied adhesive also means the veneer is not restricted to one hot-melt formulation. Adhesive selection remains the responsibility of the installer.\u003c\/p\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eAllow the veneer, adhesive and substrate to acclimatise in the same environment.\u003c\/li\u003e\n\u003cli\u003ePrepare a straight, stable, clean and dry panel edge.\u003c\/li\u003e\n\u003cli\u003eRemove dust, oil, grease and loose fibres that could weaken the bond.\u003c\/li\u003e\n\u003cli\u003eCut the veneer slightly longer than the finished component.\u003c\/li\u003e\n\u003cli\u003eSelect a compatible adhesive for the veneer, substrate and intended conditions.\u003c\/li\u003e\n\u003cli\u003eApply the adhesive according to its manufacturer’s coverage and open-time instructions.\u003c\/li\u003e\n\u003cli\u003ePosition the veneer with an even trimming allowance on both panel faces.\u003c\/li\u003e\n\u003cli\u003eApply firm, consistent pressure across the complete width and length.\u003c\/li\u003e\n\u003cli\u003eAllow the bond to develop fully before trimming or finishing.\u003c\/li\u003e\n\u003cli\u003eTrim towards the panel face to reduce the risk of splitting the natural veneer.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eAlways create a test piece using the intended substrate, adhesive, pressure and finishing system before beginning a complete production run.\u003c\/p\u003e\u003ch3\u003eFinishing Oak Veneer\u003c\/h3\u003e\u003cp\u003eOnce applied, the natural Oak surface can be finished with a compatible lacquer, oil, wax or stain. Clear finishes usually deepen the colour and emphasise the open grain, while stains can help coordinate the edging with surrounding furniture.\u003c\/p\u003e\u003cp\u003eTest the selected finish on an offcut first and avoid aggressive sanding, as decorative veneer is considerably thinner than solid Oak.\u003c\/p\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eShelf edges\u003c\/li\u003e\n\u003cli\u003eWardrobe and bedroom furniture\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and furniture components\u003c\/li\u003e\n\u003cli\u003eDoor and panel edges\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eRetail display and shopfitting units\u003c\/li\u003e\n\u003cli\u003eFurniture repairs and refurbishment\u003c\/li\u003e\n\u003cli\u003eBespoke interior joinery\u003c\/li\u003e\n\u003cli\u003eProduction edging with a separately selected adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eOak is a genuine natural material, so colour, grain, ray markings and other features will vary between rolls and batches. These variations are normal and help give the finished component an authentic real-timber appearance.\u003c\/p\u003e\u003ch3\u003eStorage and Handling\u003c\/h3\u003e\u003cp\u003eStore the roll in a clean, dry and stable environment, protected from direct sunlight, moisture, excessive heat and rapid changes in humidity. Keep the veneer supported and protect its edges from crushing or damage.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this edging made from real Oak?\u003c\/h4\u003e\u003cp\u003eYes. The visible surface is genuine natural Oak veneer rather than a printed or imitation wood-effect material.\u003c\/p\u003e\u003ch4\u003eDoes this veneer have adhesive on the back?\u003c\/h4\u003e\u003cp\u003eNo. It is an unglued FS veneer. A compatible adhesive must be selected and applied separately.\u003c\/p\u003e\u003ch4\u003eWhat is the difference between FS and FSHM veneer?\u003c\/h4\u003e\u003cp\u003eFS veneer is fleeced and sanded but unglued. FSHM veneer is fleeced, sanded and supplied with a heat-activated hot-melt adhesive.\u003c\/p\u003e\u003ch4\u003eIs 22mm edging suitable for 18mm furniture board?\u003c\/h4\u003e\u003cp\u003eYes. It normally provides a small overhang on both faces of an 18mm panel, allowing it to be trimmed flush after bonding.\u003c\/p\u003e\u003ch4\u003eCan it be applied with an ordinary iron?\u003c\/h4\u003e\u003cp\u003eNo adhesive is present to activate with an iron. A separate compatible bonding system must first be selected and applied.\u003c\/p\u003e\u003ch4\u003eCan the Oak veneer be stained or oiled?\u003c\/h4\u003e\u003cp\u003eYes. It accepts many compatible wood stains, oils, lacquers and waxes. Test the selected finish first because it will alter the natural colour.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this edging made from real Oak?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The visible surface is genuine natural Oak veneer rather than a printed wood-effect material.\"}},{\"@type\":\"Question\",\"name\":\"Does this Oak veneer have adhesive on the back?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. It is an unglued FS veneer and requires a compatible adhesive to be selected and applied separately.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between FS and FSHM veneer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"FS veneer is fleeced and sanded but unglued. FSHM veneer is fleeced, sanded and supplied with a heat-activated hot-melt adhesive.\"}},{\"@type\":\"Question\",\"name\":\"Is 22mm veneer edging suitable for 18mm board?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. It normally leaves a small overhang on both faces of an 18mm panel so it can be trimmed flush after bonding.\"}},{\"@type\":\"Question\",\"name\":\"Can unglued Oak veneer edging be applied with an iron?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No adhesive is present to activate with an iron. A separate compatible bonding system must be selected and applied.\"}}]}\u003c\/script\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"UNION VENEERS LTD","offers":[{"title":"Default Title","offer_id":62849802076509,"sku":"VEN033D","price":31.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN033D.jpg?v=1784618931"},{"product_id":"oak-flexible-wood-veneer-fs-unglued-30mm-100m","title":"VENEER FS UNGLUED OAK 30x100m","description":"\u003ch2\u003eOak Flexible Wood Veneer FS Unglued 30mm x 100m\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eOak Flexible Wood Veneer FS Unglued 30mm x 100m\u003c\/strong\u003e is a genuine real-wood edging roll designed for covering exposed furniture-board edges with the warm colour, natural texture and distinctive grain of oak.\u003c\/p\u003e\u003cp\u003eThe veneer is fleeced and sanded but supplied completely unglued. This allows cabinet makers, furniture manufacturers and professional workshops to select an adhesive suited to their particular substrate, production equipment and installation method.\u003c\/p\u003e\u003cp\u003eUnlike printed or imitation wood-effect edging, the visible surface is genuine oak veneer. Once correctly applied and finished, it creates an authentic timber appearance that coordinates particularly well with oak-faced MDF, chipboard, plywood and solid-oak furniture components.\u003c\/p\u003e\u003ch3\u003eWhat Does FS Mean?\u003c\/h3\u003e\u003cp\u003eFS stands for \u003cstrong\u003eFleeced and Sanded\u003c\/strong\u003e. A supporting fleece improves the flexibility and stability of the veneer, while the natural oak face is sanded to provide a smooth surface ready for final preparation and finishing.\u003c\/p\u003e\u003cp\u003eThis FS version does not have a heat-activated adhesive coating. A compatible adhesive must be selected and applied separately. This is the principal difference between FS unglued veneer and FSHM pre-glued veneer.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural oak veneer surface\u003c\/li\u003e\n\u003cli\u003eFleeced backing for improved flexibility and stability\u003c\/li\u003e\n\u003cli\u003eSmooth, sanded wood face\u003c\/li\u003e\n\u003cli\u003eSupplied without pre-applied adhesive\u003c\/li\u003e\n\u003cli\u003eAllows control over adhesive selection and application\u003c\/li\u003e\n\u003cli\u003e30mm width for wider edges and generous trimming allowance\u003c\/li\u003e\n\u003cli\u003eLong 100m roll for workshop and production use\u003c\/li\u003e\n\u003cli\u003eCan be trimmed, lightly sanded, stained and finished after bonding\u003c\/li\u003e\n\u003cli\u003eSuitable for furniture manufacture, refurbishment and bespoke joinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable Applications\u003c\/h3\u003e\u003cp\u003eThe 30mm width provides useful additional coverage for wider or thicker panels and applications requiring a generous trimming allowance. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eCabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eShelf and worktop edges\u003c\/li\u003e\n\u003cli\u003eWardrobe and bedroom furniture\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and furniture components\u003c\/li\u003e\n\u003cli\u003eDoor and panel edges\u003c\/li\u003e\n\u003cli\u003eOak-faced MDF, plywood and chipboard\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eRetail displays and shopfitting\u003c\/li\u003e\n\u003cli\u003eFurniture repairs and restoration\u003c\/li\u003e\n\u003cli\u003eBespoke interior joinery\u003c\/li\u003e\n\u003cli\u003eProduction edging using a separately selected adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003cp\u003ePrepare a straight, clean, dry and stable panel edge, removing dust, oil, grease and loose fibres that could weaken the bond.\u003c\/p\u003e\u003cp\u003eSelect an adhesive compatible with both the veneer backing and the substrate. Follow the adhesive manufacturer’s instructions regarding coverage, open time, pressure and curing time.\u003c\/p\u003e\u003cp\u003ePosition the veneer with sufficient material extending beyond both faces of the panel. Apply firm, consistent pressure across the complete width and length. Allow the adhesive to develop fully before trimming the veneer flush.\u003c\/p\u003e\u003cp\u003eAlways produce a test piece using the intended substrate, adhesive and finishing system before beginning a full production run.\u003c\/p\u003e\u003ch3\u003eFinishing the Veneer\u003c\/h3\u003e\u003cp\u003eOnce bonded and trimmed, the natural oak surface can be finished with a compatible lacquer, oil, wax or wood stain. Clear finishes normally deepen the colour and highlight the characteristic oak grain, while stains can help coordinate the edging with surrounding furniture.\u003c\/p\u003e\u003cp\u003eBecause decorative veneer is considerably thinner than solid timber, sand carefully and test the selected finish on an offcut first.\u003c\/p\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eOak is a natural material. Differences in shade, grain direction, ray markings and figure should be expected between sections and production batches. These variations are normal and contribute to the authentic appearance of the finished furniture.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eDoes this veneer have glue on the back?\u003c\/h4\u003e\u003cp\u003eNo. It is supplied completely unglued, allowing you to select an adhesive suitable for your substrate and application process.\u003c\/p\u003e\u003ch4\u003eWhat is the difference between FS and FSHM veneer?\u003c\/h4\u003e\u003cp\u003eFS veneer is fleeced and sanded but unglued. FSHM veneer includes a factory-applied heat-activated hot-melt adhesive.\u003c\/p\u003e\u003ch4\u003eCan this veneer be applied with an ordinary iron?\u003c\/h4\u003e\u003cp\u003eNot on its own. There is no adhesive coating for an iron to activate. A separate compatible bonding system must be selected and applied.\u003c\/p\u003e\u003ch4\u003eCan the oak veneer be stained or oiled?\u003c\/h4\u003e\u003cp\u003eYes. Once applied, it can accept many compatible stains, oils, waxes and lacquers. Always test the finish on an offcut first.\u003c\/p\u003e\u003ch4\u003eWhy choose the 30mm width?\u003c\/h4\u003e\u003cp\u003eThe wider strip provides additional coverage for thicker board edges and gives a generous trimming allowance when a flush finished edge is required.\u003c\/p\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"UNION VENEERS LTD","offers":[{"title":"Default Title","offer_id":62849802371421,"sku":"VEN033E","price":31.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN033E_96459c2c-94f9-44ff-b6b5-9a4fd2281e1e.jpg?v=1784619230"},{"product_id":"white-oak-flexible-wood-veneer-fs-unglued-50mm-300m","title":"VENEER FS UNGLUED W\/OAK 50x300m","description":"\u003cp\u003e\u003cstrong\u003eWhite Oak Flexible Wood Veneer FS Unglued 50mm × 300m\u003c\/strong\u003e is a genuine real-wood edging roll designed for high-volume production workshops and furniture manufacturers requiring a wide, long-run supply of unglued Oak veneer edging.\u003c\/p\u003e\u003cp\u003eThe veneer is fleeced and sanded but supplied \u003cstrong\u003ewithout a factory-applied adhesive\u003c\/strong\u003e, giving workshops complete control over the bonding method and adhesive choice to suit their substrate, machinery and production process.\u003c\/p\u003e\u003cp\u003eWhite Oak offers a \u003cstrong\u003epale, clean tone with a fine, straight grain\u003c\/strong\u003e — a lighter and more contemporary alternative to traditional European Oak, well suited to modern cabinetry, Scandinavian-style furniture and neutral interior schemes. The 50mm width provides generous coverage for wider panels, door edges, worktop details and components where standard narrow edging is insufficient. The 300m roll minimises changeovers in production environments.\u003c\/p\u003e\u003ch3\u003eWhat Does FS Mean?\u003c\/h3\u003e\u003cp\u003eFS means \u003cstrong\u003eFleeced and Sanded\u003c\/strong\u003e. A supporting fleece improves the veneer’s flexibility and stability, while the natural White Oak face is sanded to provide a smooth surface for finishing. Unlike FSHM veneer, this FS product has no hot-melt adhesive — a compatible adhesive must be selected and applied separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural White Oak veneer surface\u003c\/li\u003e\n\u003cli\u003ePale, clean tone with fine straight grain\u003c\/li\u003e\n\u003cli\u003eFleeced backing for improved flexibility and stability\u003c\/li\u003e\n\u003cli\u003ePre-sanded real-wood face\u003c\/li\u003e\n\u003cli\u003eSupplied completely unglued\u003c\/li\u003e\n\u003cli\u003eFull control over adhesive selection and application\u003c\/li\u003e\n\u003cli\u003eWide 50mm format for deeper components and generous trimming allowance\u003c\/li\u003e\n\u003cli\u003eLong 300m production roll to minimise changeovers\u003c\/li\u003e\n\u003cli\u003eCan be trimmed and finished after bonding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWide cabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eDoor and frame edges\u003c\/li\u003e\n\u003cli\u003eWorktop and counter details\u003c\/li\u003e\n\u003cli\u003eThick shelving and deep panel edging\u003c\/li\u003e\n\u003cli\u003eWardrobe and bedroom furniture\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eRetail display and shopfitting\u003c\/li\u003e\n\u003cli\u003eFurniture repairs and refurbishment\u003c\/li\u003e\n\u003cli\u003eBespoke interior joinery\u003c\/li\u003e\n\u003cli\u003eHigh-volume production edging runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003cp\u003ePrepare a straight, clean, dry and stable panel edge. Select a compatible adhesive for the veneer, substrate and intended conditions. Apply firm, consistent pressure across the complete width and length. Allow the bond to develop fully before trimming. Always test on an offcut before beginning a production run.\u003c\/p\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eWhite Oak is a natural material, so colour, grain and markings will vary between rolls and batches. These variations are normal and contribute to an authentic timber appearance.\u003c\/p\u003e\u003ch3\u003eStorage and Handling\u003c\/h3\u003e\u003cp\u003eStore the roll in a clean, dry and stable environment, protected from direct sunlight, moisture, excessive heat and rapid humidity changes. Keep the veneer supported and protect its edges from crushing or damage.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this edging made from real White Oak?\u003c\/h4\u003e\u003cp\u003eYes. The visible surface is genuine natural White Oak veneer.\u003c\/p\u003e\u003ch4\u003eDoes this veneer have adhesive on the back?\u003c\/h4\u003e\u003cp\u003eNo. It is an unglued FS veneer. A compatible adhesive must be selected and applied separately.\u003c\/p\u003e\u003ch4\u003eWhy choose 50mm width?\u003c\/h4\u003e\u003cp\u003eThe 50mm width covers deeper furniture components, broad edges and repair areas that cannot be finished with standard narrow edge banding.\u003c\/p\u003e\u003ch4\u003eWhat is the advantage of the 300m roll?\u003c\/h4\u003e\u003cp\u003eThe long roll reduces changeover frequency in production environments, improving efficiency and reducing waste.\u003c\/p\u003e\u003ch4\u003eCan the White Oak veneer be stained or finished?\u003c\/h4\u003e\u003cp\u003eYes. It accepts compatible lacquers, oils, waxes and stains. Always test the selected finish on an offcut first.\u003c\/p\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"SMC WHOLESALE","offers":[{"title":"Default Title","offer_id":62849802436957,"sku":"VEN033F","price":174.08,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN033F.jpg?v=1784619230"}],"url":"https:\/\/www.blum.org.uk\/collections\/unglued-veneer-edging.oembed","provider":"Hart Wholesale","version":"1.0","type":"link"}