{"product_id":"blum-71b960a-95-dual-aluminium-frame-blumotion-hinge","title":"Blum CLIP top BLUMOTION 71B960A Aluminium Frame Hinge 95° Dual Screw-On Nickel","description":"\u003ch2\u003eBlum 71B960A CLIP top BLUMOTION Aluminium-Frame Hinge – 95° Dual\u003c\/h2\u003e\n\u003cp\u003eThe Blum 71B960A is a concealed soft-close hinge developed specifically for narrow aluminium-frame cabinet doors in a dual or half-overlay application.\u003c\/p\u003e\n\u003cp\u003eA dual hinge is normally used where two doors share the same central cabinet partition. Each closed door covers part of the shared cabinet side, allowing neighbouring aluminium-framed doors to operate independently while maintaining an even central gap.\u003c\/p\u003e\n\u003cp\u003eIntegrated BLUMOTION soft-close technology controls the final closing movement, producing a smooth and quiet action without requiring a separate damper. The BLUMOTION function can be switched off on an individual hinge to optimise the closing speed of smaller or lightweight doors.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Blum CLIP top BLUMOTION hinge\u003c\/li\u003e\n\u003cli\u003eDesigned for narrow aluminium-frame cabinet doors\u003c\/li\u003e\n\u003cli\u003eDual\/half-overlay application\u003c\/li\u003e\n\u003cli\u003eSuitable for two doors sharing a central partition\u003c\/li\u003e\n\u003cli\u003eControlled 95° opening angle\u003c\/li\u003e\n\u003cli\u003eIntegrated BLUMOTION soft-close\u003c\/li\u003e\n\u003cli\u003eIndividually switchable damping function\u003c\/li\u003e\n\u003cli\u003eSprung, self-closing hinge action\u003c\/li\u003e\n\u003cli\u003eScrew-on shaped boss for prepared aluminium profiles\u003c\/li\u003e\n\u003cli\u003eBoss fixing screws included\u003c\/li\u003e\n\u003cli\u003eTool-free CLIP mounting-plate connection\u003c\/li\u003e\n\u003cli\u003eThree-dimensional door adjustment\u003c\/li\u003e\n\u003cli\u003eConvenient spiral-screw depth adjustment\u003c\/li\u003e\n\u003cli\u003eNickel-plated finish\u003c\/li\u003e\n\u003cli\u003eSupplied individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eManufacturer\u003c\/td\u003e\n\u003ctd\u003eBlum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct range\u003c\/td\u003e\n\u003ctd\u003eCLIP top BLUMOTION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBlum part number\u003c\/td\u003e\n\u003ctd\u003e71B960A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHart Wholesale stock code\u003c\/td\u003e\n\u003ctd\u003eHI71B960A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDoor construction\u003c\/td\u003e\n\u003ctd\u003eNarrow aluminium-profile framed door\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication\u003c\/td\u003e\n\u003ctd\u003eDual\/half overlay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOpening angle\u003c\/td\u003e\n\u003ctd\u003e95°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eClosing action\u003c\/td\u003e\n\u003ctd\u003eSprung and self-closing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSoft-close\u003c\/td\u003e\n\u003ctd\u003eIntegrated, switchable BLUMOTION\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDoor fixing\u003c\/td\u003e\n\u003ctd\u003eScrew-on shaped boss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCabinet connection\u003c\/td\u003e\n\u003ctd\u003eTool-free CLIP mounting plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdjustment\u003c\/td\u003e\n\u003ctd\u003eThree-dimensional\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDepth adjustment\u003c\/td\u003e\n\u003ctd\u003eSpiral adjustment screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eNickel-plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupplied\u003c\/td\u003e\n\u003ctd\u003eOne hinge with boss fixing screws\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting plate\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eWhat is a dual or half-overlay hinge?\u003c\/h3\u003e\n\u003cp\u003eA dual hinge is used when two cabinet doors are hinged from opposite sides of the same central partition. Each door covers only part of that partition, rather than completely overlaying it.\u003c\/p\u003e\n\u003cp\u003eThe exact door overlay and central gap depend on the aluminium profile, cabinet construction, mounting-plate height and final hinge adjustment. These measurements should be confirmed against the Blum planning information before machining the door profiles.\u003c\/p\u003e\n\u003ch3\u003eIntegrated BLUMOTION soft-close\u003c\/h3\u003e\n\u003cp\u003eBLUMOTION is built directly into the hinge arm. It slows the aluminium-framed door before it reaches the cabinet, reducing closing noise and limiting impact on the frame, decorative panel and cabinet structure.\u003c\/p\u003e\n\u003cp\u003eThe damping mechanism can be deactivated on an individual hinge. This provides greater control when fitting small or lightweight doors that may close too slowly with every hinge damper operating.\u003c\/p\u003e\n\u003ch3\u003eMade for narrow aluminium profiles\u003c\/h3\u003e\n\u003cp\u003eThe 71B960A uses a specially shaped boss that fits into a correctly routed aluminium door profile. It is not a standard round 35mm cup hinge and is not intended for ordinary timber, MDF or chipboard cabinet doors.\u003c\/p\u003e\n\u003cp\u003eAluminium profile dimensions vary between systems. Check the profile width, thickness, routing pattern and required minimum gap against the Blum technical information before machining. A trial installation is advisable when using a new frame profile.\u003c\/p\u003e\n\u003ch3\u003eInstallation and adjustment\u003c\/h3\u003e\n\u003cp\u003eThe shaped boss is fixed to the prepared aluminium profile using the supplied screws. The hinge arm then clips onto a compatible Blum mounting plate without tools, allowing the door to be attached and removed without disturbing the cabinet-side fixing.\u003c\/p\u003e\n\u003cp\u003eThree-dimensional adjustment helps the installer achieve an even central gap and consistent alignment with neighbouring doors. The spiral depth-adjustment screw provides precise adjustment without removing the hinge.\u003c\/p\u003e\n\u003ch3\u003eMounting plate required\u003c\/h3\u003e\n\u003cp\u003eA mounting plate is not included. Choose the correct height and cabinet fixing method from our \u003ca href=\"\/collections\/blum-hinges-clip-top-mounting-plates\"\u003eBlum CLIP top mounting plates\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eRelated aluminium-frame hinges\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/clip-hinge-95deg-hollow-door-over-scr\"\u003eBlum 71B950A overlay aluminium-frame BLUMOTION hinge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blum-71b970a-95-inset-aluminium-frame-blumotion-hinge\"\u003eBlum 71B970A inset aluminium-frame BLUMOTION hinge\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/collections\/blum-hinges-clip-top\"\u003eBrowse all Blum CLIP top hinges\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is a dual or half-overlay hinge used for?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt is used where two doors share a central cabinet partition. Each door overlays part of the shared panel while leaving sufficient space for both doors to open.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs BLUMOTION included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. The soft-close mechanism is integrated into the hinge arm and can be switched off on an individual hinge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this suitable for wooden or MDF cabinet doors?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. The 71B960A is designed for narrow aluminium-profile framed doors and uses a specially shaped fixing boss.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre the boss fixing screws included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eYes. Blum supplies the screws required to secure the shaped hinge boss to the prepared aluminium profile.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the mounting plate included?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. A compatible Blum CLIP mounting plate must be ordered separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between 71B950A, 71B960A and 71B970A?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe 71B950A is for overlay doors, the 71B960A is for dual or half-overlay doors, and the 71B970A is for inset doors.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs the hinge supplied as a pair?\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNo. HI71B960A is priced and supplied as one hinge.\u003c\/p\u003e","brand":"Blum","offers":[{"title":"Default Title","offer_id":62846513250653,"sku":"HI71B960A","price":5.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/HI71B960A_ae0bc4ef-b0ea-4173-8273-576e471dc1c4.jpg?v=1784892931","url":"https:\/\/www.blum.org.uk\/products\/blum-71b960a-95-dual-aluminium-frame-blumotion-hinge","provider":"Hart Wholesale","version":"1.0","type":"link"}