{"product_id":"blum-71t9690b-95-half-overlay-profile-inserta-hinge","title":"Blum CLIP Top 95° Half-Overlay Profile Hinge INSERTA | 71T9690B","description":"\u003ch2\u003eBlum 71T9690B CLIP Top 95° Half-Overlay Profile Door Hinge – INSERTA\u003c\/h2\u003e\n\n\u003cp\u003eThe \u003cstrong\u003eBlum 71T9690B CLIP top hinge\u003c\/strong\u003e is designed for dual or half-overlay cabinet applications using thick doors, shaped fronts or doors with profiled and moulded edges. It is commonly used where two cabinet doors share the same central partition, with each door covering part of the cabinet side.\u003c\/p\u003e\n\n\u003cp\u003eIts specialised profile-door geometry and controlled \u003cstrong\u003e95° opening angle\u003c\/strong\u003e provide additional clearance for thick or decorative door edges. This helps prevent the door from binding against the cabinet or interfering with the adjoining door during opening.\u003c\/p\u003e\n\n\u003cp\u003eThe 71T9690B has a \u003cstrong\u003esprung, self-closing mechanism\u003c\/strong\u003e that pulls the cabinet door towards the closed position. It is not an unsprung hinge and is not intended as the preferred hinge for a TIP-ON push-to-open installation.\u003c\/p\u003e\n\n\u003ch3\u003eTool-free INSERTA hinge-cup fixing\u003c\/h3\u003e\n\n\u003cp\u003eBlum’s INSERTA system allows the hinge cup to be secured to a correctly drilled cabinet door without conventional fixing screws. The fixing expands into the prepared holes when the INSERTA lever is closed, providing fast, accurate and repeatable installation.\u003c\/p\u003e\n\n\u003cp\u003eThe hinge arm also connects to a compatible Blum CLIP mounting plate without tools. This allows the door to be installed, removed and refitted easily without disturbing the mounting plate.\u003c\/p\u003e\n\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eGenuine Blum CLIP top concealed cabinet hinge\u003c\/li\u003e\n  \u003cli\u003eBlum part number: 71T9690B\u003c\/li\u003e\n  \u003cli\u003eHart Wholesale stock code: HI71T9690B\u003c\/li\u003e\n  \u003cli\u003eDesigned for thick and profiled cabinet doors\u003c\/li\u003e\n  \u003cli\u003eDual or half-overlay application\u003c\/li\u003e\n  \u003cli\u003eSuitable where two doors share a central cabinet partition\u003c\/li\u003e\n  \u003cli\u003e95° opening angle\u003c\/li\u003e\n  \u003cli\u003eSprung, self-closing mechanism\u003c\/li\u003e\n  \u003cli\u003eTool-free INSERTA hinge-cup fixing\u003c\/li\u003e\n  \u003cli\u003eNickel-plated finish\u003c\/li\u003e\n  \u003cli\u003eTool-free CLIP connection to the mounting plate\u003c\/li\u003e\n  \u003cli\u003eThree-dimensional front adjustment\u003c\/li\u003e\n  \u003cli\u003eSuitable for front thicknesses up to 32mm, subject to installation geometry\u003c\/li\u003e\n  \u003cli\u003eSupplied as one hinge\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eAdjustment\u003c\/h3\u003e\n\n\u003cul\u003e\n  \u003cli\u003eHeight adjustment: up to ±3mm, depending on the mounting plate\u003c\/li\u003e\n  \u003cli\u003eSide adjustment: up to ±2mm\u003c\/li\u003e\n  \u003cli\u003eDepth adjustment: +3mm to −2mm using the spiral adjustment screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch3\u003eImportant ordering information\u003c\/h3\u003e\n\n\u003cp\u003eThis listing is for \u003cstrong\u003eone hinge only\u003c\/strong\u003e. “Dual” describes the half-overlay application and does not mean that two hinges are supplied.\u003c\/p\u003e\n\n\u003cp\u003eA compatible Blum CLIP mounting plate must be selected and ordered separately. The required plate height depends on the door overlay, cabinet-side thickness and installation geometry.\u003c\/p\u003e\n\n\u003cp\u003eThe door must be drilled with the correct 35mm cup hole and INSERTA fixing-hole pattern. A trial installation is recommended for unusually thick or heavily moulded fronts.\u003c\/p\u003e\n\n\u003cp\u003eBrowse our complete \u003ca href=\"\/collections\/blum-hinges-clip-top\"\u003eBlum CLIP top hinge range\u003c\/a\u003e, compatible \u003ca href=\"\/collections\/blum-hinges-clip-top-mounting-plates\"\u003eBlum CLIP mounting plates\u003c\/a\u003e and \u003ca href=\"\/collections\/blum-inserta-hinges\"\u003eBlum INSERTA hinges\u003c\/a\u003e.\u003c\/p\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\n\u003ch3\u003eWhat does dual or half-overlay mean?\u003c\/h3\u003e\n\u003cp\u003eA half-overlay application is normally used where two cabinet doors share one central partition. Each door covers part of the cabinet side so that both doors can close against the same dividing panel.\u003c\/p\u003e\n\n\u003ch3\u003eDoes “dual” mean that two hinges are included?\u003c\/h3\u003e\n\u003cp\u003eNo. Dual describes the half-overlay door application. This listing is for one individual hinge.\u003c\/p\u003e\n\n\u003ch3\u003eIs the Blum 71T9690B sprung or unsprung?\u003c\/h3\u003e\n\u003cp\u003eIt is sprung and self-closing.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this hinge include BLUMOTION soft-close?\u003c\/h3\u003e\n\u003cp\u003eNo. The 71T9690B is self-closing but does not contain integrated BLUMOTION. Choose the 71B9690 version when integrated soft-close is required.\u003c\/p\u003e\n\n\u003ch3\u003eIs it suitable for TIP-ON push-to-open doors?\u003c\/h3\u003e\n\u003cp\u003eNo. Its sprung closing action works against the free movement required for TIP-ON. A correctly specified unsprung hinge should be selected for a push-to-open installation.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is INSERTA fixing?\u003c\/h3\u003e\n\u003cp\u003eINSERTA is Blum’s tool-free hinge-cup fixing system. The hinge locks into correctly drilled cup and fixing holes without conventional fixing screws.\u003c\/p\u003e\n\n\u003ch3\u003eDoes INSERTA mean that the mounting plate is included?\u003c\/h3\u003e\n\u003cp\u003eNo. INSERTA describes the hinge fixing to the door. A compatible Blum CLIP mounting plate for the cabinet must be ordered separately.\u003c\/p\u003e\n\n\u003ch3\u003eIs the hinge suitable for thick doors?\u003c\/h3\u003e\n\u003cp\u003eYes. It is designed for thick doors and fronts with profiled or moulded edges. Blum’s planning information covers front thicknesses up to 32mm, subject to the drilling distance, edge radius and required gap.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between 71T9690B and 71B9690?\u003c\/h3\u003e\n\u003cp\u003eThe 71T9690B is sprung without integrated soft-close. The 71B9690 incorporates BLUMOTION soft-close within the hinge.\u003c\/p\u003e","brand":"JULIUS BLUM UK LTD","offers":[{"title":"Default Title","offer_id":62846520525149,"sku":"HI71T9690B","price":2.58,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/HI71T9690B.jpg?v=1784892643","url":"https:\/\/www.blum.org.uk\/products\/blum-71t9690b-95-half-overlay-profile-inserta-hinge","provider":"Hart Wholesale","version":"1.0","type":"link"}