{"product_id":"blum-75t1650-107-half-overlay-screw-on-hinge","title":"Blum 75T1650 CLIP Top 107° Half-Overlay Screw-On Hinge – Nickel","description":"\u003ch2\u003eBlum 75T1650 CLIP Top 107° Half-Overlay Screw-On Hinge\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBlum 75T1650\u003c\/strong\u003e is a sprung CLIP top concealed hinge for \u003cstrong\u003edual or half-overlay cabinet doors\u003c\/strong\u003e. This application is commonly used where two doors are fitted on opposite sides of the same central cabinet partition.\u003c\/p\u003e\u003cp\u003eThe hinge combines a 107° opening angle with a shallow \u003cstrong\u003e11.5mm minimum cup drilling depth\u003c\/strong\u003e, making it suitable for cabinet fronts approximately \u003cstrong\u003e15–24mm thick\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e the 75T1650 is sprung and self-closing, but it does \u003cstrong\u003enot\u003c\/strong\u003e contain integrated BLUMOTION soft-close.\u003c\/p\u003e\u003ch3\u003eDual and half-overlay application\u003c\/h3\u003e\u003cp\u003eThe 9.5mm cranked hinge arm positions each door so that it covers approximately half of the shared cabinet partition. This allows two doors to operate from the same centre panel while maintaining the required gap between them.\u003c\/p\u003e\u003cp\u003eThe final overlay and door gap depend on the selected mounting-plate height, cup-drilling distance and cabinet construction. A trial installation is recommended before drilling several doors.\u003c\/p\u003e\u003ch3\u003eConventional screw-on cup fixing\u003c\/h3\u003e\u003cp\u003eThe 75T1650 has a conventional screw-on 35mm hinge cup. After drilling the cup hole, the hinge is positioned squarely in the door and secured through the two countersunk fixing holes.\u003c\/p\u003e\u003cp\u003eThis fixing method is particularly suitable for replacement work, small production runs and installations where conventional screws are preferred over INSERTA or mechanically pressed knock-in dowels.\u003c\/p\u003e\u003cp\u003eSuitable cup-fixing screws should be selected for the door material and ordered separately unless expressly included with the chosen packaging.\u003c\/p\u003e\u003ch3\u003eCLIP top fitting and adjustment\u003c\/h3\u003e\u003cp\u003eAlthough the hinge cup is screw-fixed, the hinge arm connects to a compatible Blum mounting plate using Blum’s tool-free CLIP mechanism. This allows the door to be attached or removed without disturbing the mounting-plate screws.\u003c\/p\u003e\u003cp\u003eSide, depth and height adjustment allow the doors to be aligned accurately across the shared cabinet partition.\u003c\/p\u003e\u003ch3\u003eKey features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine Blum CLIP top concealed cabinet hinge\u003c\/li\u003e\n\u003cli\u003eBlum part number 75T1650\u003c\/li\u003e\n\u003cli\u003eDesigned for dual or half-overlay doors\u003c\/li\u003e\n\u003cli\u003e9.5mm cranked hinge arm\u003c\/li\u003e\n\u003cli\u003e107° opening angle\u003c\/li\u003e\n\u003cli\u003eSprung and self-closing\u003c\/li\u003e\n\u003cli\u003eNo integrated BLUMOTION soft-close\u003c\/li\u003e\n\u003cli\u003eConventional screw-on 35mm cup\u003c\/li\u003e\n\u003cli\u003eMinimum cup drilling depth of 11.5mm\u003c\/li\u003e\n\u003cli\u003eSuitable for cabinet fronts approximately 15–24mm thick\u003c\/li\u003e\n\u003cli\u003eTool-free CLIP connection to the mounting plate\u003c\/li\u003e\n\u003cli\u003eThree-dimensional door adjustment\u003c\/li\u003e\n\u003cli\u003eSpiral-screw depth adjustment\u003c\/li\u003e\n\u003cli\u003eNickel-plated steel construction\u003c\/li\u003e\n\u003cli\u003eSupplied individually\u003c\/li\u003e\n\u003cli\u003eMounting plate sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eManufacturer\u003c\/th\u003e\n\u003ctd\u003eBlum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlum part number\u003c\/th\u003e\n\u003ctd\u003e75T1650\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHart stock code\u003c\/th\u003e\n\u003ctd\u003eHI75T165\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eBlum identification code\u003c\/th\u003e\n\u003ctd\u003e03564773\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eGTIN \/ EAN\u003c\/th\u003e\n\u003ctd\u003e9002617436969\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHinge system\u003c\/th\u003e\n\u003ctd\u003eCLIP top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eApplication\u003c\/th\u003e\n\u003ctd\u003eDual or half overlay\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHinge-arm cranking\u003c\/th\u003e\n\u003ctd\u003e9.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eOpening angle\u003c\/th\u003e\n\u003ctd\u003e107°\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eClosing action\u003c\/th\u003e\n\u003ctd\u003eSprung and self-closing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eIntegrated soft-close\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCup fixing\u003c\/th\u003e\n\u003ctd\u003eScrew-on\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCup drilling diameter\u003c\/th\u003e\n\u003ctd\u003e35mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMinimum cup drilling depth\u003c\/th\u003e\n\u003ctd\u003e11.5mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCup drilling distance\u003c\/th\u003e\n\u003ctd\u003e3–6mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eRecommended front thickness\u003c\/th\u003e\n\u003ctd\u003e15–24mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eSide adjustment\u003c\/th\u003e\n\u003ctd\u003e±2mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eDepth adjustment\u003c\/th\u003e\n\u003ctd\u003e+3mm \/ −2mm using spiral screw\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eHeight adjustment\u003c\/th\u003e\n\u003ctd\u003eThrough the selected mounting plate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMaterial\u003c\/th\u003e\n\u003ctd\u003eSteel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eFinish\u003c\/th\u003e\n\u003ctd\u003eNickel plated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eQuantity supplied\u003c\/th\u003e\n\u003ctd\u003eOne hinge\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eMounting plate included\u003c\/th\u003e\n\u003ctd\u003eNo – sold separately\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth\u003eCup-fixing screws included\u003c\/th\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eAlternative cup-fixing methods\u003c\/h3\u003e\u003cp\u003eFor tool-free cup installation in the same half-overlay application, choose the \u003ca href=\"\/products\/clip-hinge-107deg-dual-spr-inserta\"\u003eBlum 75T1690B half-overlay INSERTA hinge\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eFor a mechanically pressed dowel fixing, choose the \u003ca href=\"\/products\/blum-75t1680-107-half-overlay-knock-in-hinge\"\u003eBlum 75T1680 half-overlay knock-in hinge\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eA compatible \u003ca href=\"\/collections\/blum-hinges-clip-top-mounting-plates\"\u003eBlum CLIP top mounting plate\u003c\/a\u003e is required and must be ordered separately.\u003c\/p\u003e\u003cp\u003eBrowse the complete \u003ca href=\"\/collections\/blum-hinges-clip-top\"\u003eBlum CLIP top hinge collection\u003c\/a\u003e.\u003c\/p\u003e\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\u003ch3\u003eDoes the Blum 75T1650 have soft-close?\u003c\/h3\u003e\u003cp\u003eNo. The hinge has a closing spring but does not contain an integrated BLUMOTION soft-close damper.\u003c\/p\u003e\u003ch3\u003eWhat does dual or half overlay mean?\u003c\/h3\u003e\u003cp\u003eIt means that two cabinet doors share the same central partition. The cranked hinge arm positions each door so that it covers approximately half of the shared panel.\u003c\/p\u003e\u003ch3\u003eIs this a screw-on hinge?\u003c\/h3\u003e\u003cp\u003eYes. The 35mm hinge cup is secured to the door using two suitable countersunk fixing screws.\u003c\/p\u003e\u003ch3\u003eAre the cup-fixing screws included?\u003c\/h3\u003e\u003cp\u003eNo. Suitable screws should be selected for the door material and ordered separately.\u003c\/p\u003e\u003ch3\u003eWhat drilling is required?\u003c\/h3\u003e\u003cp\u003eThe hinge requires a 35mm cup hole with a minimum depth of 11.5mm. The recommended cup-drilling distance is between 3mm and 6mm.\u003c\/p\u003e\u003ch3\u003eWhat door thickness is suitable?\u003c\/h3\u003e\u003cp\u003eThe hinge is suitable for cabinet fronts approximately 15–24mm thick. A trial fitting is recommended when using unusual materials or thick edge profiles.\u003c\/p\u003e\u003ch3\u003eWhat is the difference between 75T1650 and 75T1690B?\u003c\/h3\u003e\u003cp\u003eBoth are sprung 107° half-overlay hinges without integrated soft-close. The 75T1650 has a screw-on cup, while the 75T1690B uses tool-free INSERTA cup fixing.\u003c\/p\u003e\u003ch3\u003eIs the mounting plate included?\u003c\/h3\u003e\u003cp\u003eNo. A compatible Blum CLIP top mounting plate must be ordered separately.\u003c\/p\u003e\u003ch3\u003eIs the hinge sold individually?\u003c\/h3\u003e\u003cp\u003eYes. Each quantity ordered supplies one Blum 75T1650 hinge.\u003c\/p\u003e","brand":"JULIUS BLUM UK LTD","offers":[{"title":"Default Title","offer_id":62846522130781,"sku":"HI75T165","price":1.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/HI75T165.jpg?v=1784895511","url":"https:\/\/www.blum.org.uk\/products\/blum-75t1650-107-half-overlay-screw-on-hinge","provider":"Hart Wholesale","version":"1.0","type":"link"}