{"product_id":"blum-75t4100-94-overlay-glass-door-hinge","title":"BLUM CLIP GLASS HINGE 94deg OVERLAY SCREW-ON","description":"\u003ch2\u003eBlum 75T4100 CLIP Top 94° Overlay Glass Door Hinge\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBlum 75T4100\u003c\/strong\u003e is a sprung CLIP top concealed hinge designed specifically for \u003cstrong\u003efull-overlay glass cabinet doors\u003c\/strong\u003e. It provides a 94° opening angle and is suitable for drilled frameless glass fronts between \u003cstrong\u003e4.5mm and 7mm thick\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe hinge’s internal spring pulls the glass door into the closed position. This makes it self-closing, but it does \u003cstrong\u003enot\u003c\/strong\u003e contain integrated BLUMOTION soft-close.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eImportant:\u003c\/strong\u003e this is not a no-drill glass hinge. The glass door requires an accurately manufactured 26mm fixing hole. Glass drilling and edge preparation should always be completed by a suitably equipped glass processor before the glass is toughened.\u003c\/p\u003e\n\u003ch3\u003eFull-overlay glass-door application\u003c\/h3\u003e\n\u003cp\u003eThe straight hinge arm is intended for an overlay application, where the closed glass door covers most of the cabinet side panel. It is suitable for display cabinets, glass-fronted furniture, kitchen wall units and other cabinets using frameless glass doors.\u003c\/p\u003e\n\u003cp\u003eThe final overlay depends on the mounting-plate height, drilling position and cabinet construction. A trial assembly should be completed before producing multiple doors.\u003c\/p\u003e\n\u003ch3\u003eDrilled-glass screw fixing\u003c\/h3\u003e\n\u003cp\u003eThe hinge uses a glass-specific screw-on boss rather than the conventional 35mm cup used in timber cabinet doors. The glass requires a \u003cstrong\u003e26mm diameter hole\u003c\/strong\u003e, with a permitted tolerance of +0.2\/−0mm.\u003c\/p\u003e\n\u003cp\u003eThe recommended distance from the outside edge of the 26mm drilling to the edge of the glass door is \u003cstrong\u003e5.5–7mm\u003c\/strong\u003e. The correct drilling position must be confirmed from Blum’s planning information for the required overlay.\u003c\/p\u003e\n\u003cp\u003eThe boss-fixing screws are supplied with the hinge. Tightening and glass preparation must follow Blum’s instructions to avoid damaging the door.\u003c\/p\u003e\n\u003ch3\u003eCLIP top installation and adjustment\u003c\/h3\u003e\n\u003cp\u003eThe hinge arm clips onto a compatible Blum mounting plate, allowing the glass door to be attached or removed from the cabinet without undoing the mounting screws.\u003c\/p\u003e\n\u003cp\u003eThree-dimensional adjustment and spiral-screw depth adjustment allow the door position and gaps to be aligned accurately after installation.\u003c\/p\u003e\n\u003ch3\u003eKey features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eGenuine Blum CLIP top glass-door hinge\u003c\/li\u003e\n\u003cli\u003eBlum part number 75T4100\u003c\/li\u003e\n\u003cli\u003eDesigned for full-overlay glass cabinet doors\u003c\/li\u003e\n\u003cli\u003eSuitable for drilled frameless glass\u003c\/li\u003e\n\u003cli\u003eFor glass thicknesses from 4.5–7mm\u003c\/li\u003e\n\u003cli\u003e94° opening angle\u003c\/li\u003e\n\u003cli\u003eSprung and self-closing\u003c\/li\u003e\n\u003cli\u003eNo integrated BLUMOTION soft-close\u003c\/li\u003e\n\u003cli\u003e26mm glass drilling required\u003c\/li\u003e\n\u003cli\u003eScrew-on glass-door boss\u003c\/li\u003e\n\u003cli\u003eBoss-fixing screws included\u003c\/li\u003e\n\u003cli\u003eTool-free CLIP connection to the mounting plate\u003c\/li\u003e\n\u003cli\u003eThree-dimensional door adjustment\u003c\/li\u003e\n\u003cli\u003eNickel-plated hinge finish\u003c\/li\u003e\n\u003cli\u003eSupplied individually\u003c\/li\u003e\n\u003cli\u003eMounting plate and decorative cover cap sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical specifications\u003cbr\u003e\n\u003c\/h3\u003e\n\u003ctable border=\"0\" cellpadding=\"0\" cellspacing=\"0\" width=\"462\" style=\"border-collapse: collapse; width: 347pt;\" summary=\"simpleview-AbT28\"\u003e\n\u003ccolgroup\u003e \u003ccol width=\"274\" style=\"mso-width-source: userset; mso-width-alt: 10020; width: 206pt;\"\u003e \u003ccol width=\"188\" style=\"mso-width-source: userset; mso-width-alt: 6875; width: 141pt;\"\u003e \u003c\/colgroup\u003e\n\u003ctbody\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"VR-AbT29\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" width=\"274\" style=\"height: 15.0pt; width: 206pt;\"\u003e\n\u003cdiv style=\"box-sizing: border-box; overflow: auto;\"\u003e\u003cnobr\u003eapplication\u003c\/nobr\u003e\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd class=\"xl63\" width=\"188\" style=\"width: 141pt;\" id=\"GLASTUERSCH.-VE~~ART-06458437-\"\u003e\u003cnobr\u003eglass door hinge\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"0~~ECKANSCHL.-KROEPF-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"0~~ECKANSCHL.-KROEPF-06458437-\"\u003e\u003cnobr\u003eCranking\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"0~~ECKANSCHL.-KROEPF-06458437-\"\u003e\u003cnobr\u003eOverlay application\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"94-OEFFWI-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"94-OEFFWI-06458437-\"\u003e\u003cnobr\u003eOpening angle\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"94-OEFFWI-06458437-\"\u003e\u003cnobr\u003e94\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"JA-S~~MECH-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"JA-S~~MECH-06458437-\"\u003e\u003cnobr\u003eClosing mechanism\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"JA-S~~MECH-06458437-\"\u003e\u003cnobr\u003ewith spring\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"TYP~~2-AB~~TYP-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"TYP~~2-AB~~TYP-06458437-\"\u003e\u003cnobr\u003eCover cap type\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"TYP~~2-AB~~TYP-06458437-\"\u003e\u003cnobr\u003e90M2603\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"TYP~~32-AB~~TYP-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"TYP~~32-AB~~TYP-06458437-\"\u003e\u003cnobr\u003eCover cap type\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"TYP~~32-AB~~TYP-06458437-\"\u003e\u003cnobr\u003e70.1553\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"KUNSTSTOFF-TO~~MAT-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"KUNSTSTOFF-TO~~MAT-06458437-\"\u003e\u003cnobr\u003eBoss material\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"KUNSTSTOFF-TO~~MAT-06458437-\"\u003e\u003cnobr\u003eNylon boss\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"S-TO~~OBF-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"S-TO~~OBF-06458437-\"\u003e\u003cnobr\u003eboss finish\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"S-TO~~OBF-06458437-\"\u003e\u003cnobr\u003eBlack\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"SCHRAUBEN-TO~~BEF-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"SCHRAUBEN-TO~~BEF-06458437-\"\u003e\u003cnobr\u003eBoss assembly\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"SCHRAUBEN-TO~~BEF-06458437-\"\u003e\u003cnobr\u003escrew-on\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"2.5-FL~~HOE-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"2.5-FL~~HOE-06458437-\"\u003e\u003cnobr\u003eFlange height\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"2.5-FL~~HOE-06458437-\"\u003e\u003cnobr\u003e2.5 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"26-TO~~DM-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"diametre hinge boss drilling\"\u003e\u003cnobr\u003ediameter hinge boss drilling\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"26-TO~~DM-06458437-\"\u003e\u003cnobr\u003e26 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"22-BO~~ABS-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"distance between drillings\"\u003e\u003cnobr\u003edistance between drillings\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"22-BO~~ABS-06458437-\"\u003e\u003cnobr\u003e22 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"5.5-EINBMI-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"Minimum drilling distance\"\u003e\u003cnobr\u003eMinimum drilling distance\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"5.5-EINBMI-06458437-\"\u003e\u003cnobr\u003e5.5 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"7-EINBMA-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"Maximum drilling distance\"\u003e\u003cnobr\u003eMaximum drilling distance\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"7-EINBMA-06458437-\"\u003e\u003cnobr\u003e7 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"STAHL-BA~~MAT-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"STAHL-BA~~MAT-06458437-\"\u003e\u003cnobr\u003earm material\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"STAHL-BA~~MAT-06458437-\"\u003e\u003cnobr\u003eSteel\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"NI-BA~~OBF-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"NI-BA~~OBF-06458437-\"\u003e\u003cnobr\u003earm finish\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"NI-BA~~OBF-06458437-\"\u003e\u003cnobr\u003eNickel plated\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"19-KOLLMA-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"collision measurement (hinge arm height)\"\u003e\u003cnobr\u003ecollision measurement (hinge arm height)\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"19-KOLLMA-06458437-\"\u003e\u003cnobr\u003e19 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"10-FIXMAS-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"Fixed dimension \/ factory setting\"\u003e\u003cnobr\u003eFixed dimension \/ factory setting\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"10-FIXMAS-06458437-\"\u003e\u003cnobr\u003e10 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"SCHRAUBE-ART~~SV-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"Type of side adjustment\"\u003e\u003cnobr\u003eType of side adjustment\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"SCHRAUBE-ART~~SV-06458437-\"\u003e\u003cnobr\u003eWith screw\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"+0,5\/~~3,5-SEIT~~V-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"+0,5\/~~3,5-SEIT~~V-06458437-\"\u003e\u003cnobr\u003eSide adjustment\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"+0,5\/~~3,5-SEIT~~V-06458437-\"\u003e\u003cnobr\u003e+0,5\/-3,5 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"SCHNECKE-ART~~TV-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" title=\"Type of depth adjustment\"\u003e\u003cnobr\u003eType of depth adjustment\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" title=\"convenient with spiral screw\" style=\"box-sizing: border-box;\"\u003e\u003cnobr\u003econvenient with spiral screw\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"+\/~~2-TIEF~~V-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"+\/~~2-TIEF~~V-06458437-\"\u003e\u003cnobr\u003eDepth adjustment\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"+\/~~2-TIEF~~V-06458437-\"\u003e\u003cnobr\u003e+\/-2 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"3-TUERSP-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"3-TUERSP-06458437-\"\u003e\u003cnobr\u003eGap\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"3-TUERSP-06458437-\"\u003e\u003cnobr\u003e3 mm\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"1~~STUECK-ARTU-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"1~~STUECK-ARTU-06458437-\"\u003e\u003cnobr\u003eItem package\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"1~~STUECK-ARTU-06458437-\"\u003e\u003cnobr\u003e1 piece\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"HANDELS~~VP-VERP-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"HANDELS~~VP-VERP-06458437-\"\u003e\u003cnobr\u003epackaging\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"HANDELS~~VP-VERP-06458437-\"\u003e\u003cnobr\u003eCommercial packing\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr height=\"20\" style=\"height: 15.0pt;\" id=\"NEIN-PROKOM-06458437-R\"\u003e\n\u003ctd height=\"20\" class=\"xl63\" style=\"height: 15.0pt;\" id=\"NEIN-PROKOM-06458437-\"\u003e\u003cnobr\u003eproduct combination\u003c\/nobr\u003e\u003c\/td\u003e\n\u003ctd class=\"xl63\" id=\"NEIN-PROKOM-06458437-\"\u003e\u003cnobr\u003eNo\u003c\/nobr\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch3\u003eCompatible parts and alternative applications\u003c\/h3\u003e\n\u003cp\u003eA compatible \u003ca href=\"\/collections\/blum-hinges-clip-top-mounting-plates\"\u003eBlum CLIP top mounting plate\u003c\/a\u003e must be ordered separately.\u003c\/p\u003e\n\u003cp\u003eFor two glass doors sharing a central cabinet panel, use the \u003ca href=\"\/products\/c-top-olay-gl-hinge-94deg-scr-scre\"\u003eBlum 75T4200 94° dual glass-door hinge\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFor a glass door positioned within the cabinet opening, use the \u003ca href=\"\/products\/c-top-inset-gl-hinge-94deg-scr-scre\"\u003eBlum 75T4300 94° inset glass-door hinge\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBrowse the complete \u003ca href=\"\/collections\/blum-hinges-glass-door\"\u003eBlum glass-door hinge collection\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003ch3\u003eDoes the Blum 75T4100 have soft-close?\u003c\/h3\u003e\n\u003cp\u003eNo. The hinge contains a closing spring but does not have an integrated BLUMOTION damper.\u003c\/p\u003e\n\u003ch3\u003eDoes the glass door need to be drilled?\u003c\/h3\u003e\n\u003cp\u003eYes. The hinge requires a 26mm diameter hole in the glass. It must not be described as a no-drill glass hinge.\u003c\/p\u003e\n\u003ch3\u003eWhen should the glass be drilled?\u003c\/h3\u003e\n\u003cp\u003eThe drilling and edge preparation should normally be completed by a specialist glass processor before the door is toughened. Toughened glass cannot normally be drilled or altered afterwards.\u003c\/p\u003e\n\u003ch3\u003eWhat glass thickness is suitable?\u003c\/h3\u003e\n\u003cp\u003eThe Blum 75T4100 is designed for glass fronts between 4.5mm and 7mm thick.\u003c\/p\u003e\n\u003ch3\u003eAre the glass-fixing screws included?\u003c\/h3\u003e\n\u003cp\u003eYes. The boss-fixing screws required to secure the hinge to the prepared glass door are included.\u003c\/p\u003e\n\u003ch3\u003eIs the mounting plate included?\u003c\/h3\u003e\n\u003cp\u003eNo. A compatible Blum CLIP top mounting plate must be selected and ordered separately.\u003c\/p\u003e\n\u003ch3\u003eIs the decorative cover cap included?\u003c\/h3\u003e\n\u003cp\u003eNo. The hinge-boss cover cap is an optional decorative accessory and must be ordered separately.\u003c\/p\u003e\n\u003ch3\u003eWhat is the difference between 75T4100, 75T4200 and 75T4300?\u003c\/h3\u003e\n\u003cp\u003eThe 75T4100 is for full-overlay doors, the 75T4200 is for dual or half-overlay doors, and the 75T4300 is for inset glass doors.\u003c\/p\u003e\n\u003ch3\u003eIs the hinge sold as a pair?\u003c\/h3\u003e\n\u003cp\u003eNo. Each quantity ordered supplies one hinge.\u003c\/p\u003e","brand":"JULIUS BLUM UK LTD","offers":[{"title":"Default Title","offer_id":62846521803101,"sku":"HI7541G","price":2.8,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/HI7541G_5674bed0-1c75-4d5b-80c4-453a85b958c5.jpg?v=1785749281","url":"https:\/\/www.blum.org.uk\/products\/blum-75t4100-94-overlay-glass-door-hinge","provider":"Hart Wholesale","version":"1.0","type":"link"}