{"product_id":"blum-aventos-hk-xs-20k1501-lift-mechanism-800-1800","title":"Blum AVENTOS HK-XS 20K1501 Lift Set 800–1800","description":"\u003cp\u003eThe \u003cstrong\u003eBlum AVENTOS HK-XS 20K1501 stay-lift mechanism\u003c\/strong\u003e provides compact upward-opening support for small single-piece cabinet fronts. Its higher \u003cstrong\u003e800–1800 power-factor range\u003c\/strong\u003e is intended for HK-XS applications requiring more lifting force than the 20K1101 or 20K1301 mechanisms.\u003c\/p\u003e\n\n\u003cp\u003eStock code \u003cstrong\u003eHI20K1501SET\u003c\/strong\u003e identifies this standard configuration. It is not the TIP-ON version and must not be presented as a handleless or push-to-open mechanism. The symmetrical design allows the lift mechanism to be installed on one side or, where the calculated application requires it, on both sides of the cabinet.\u003c\/p\u003e\n\n\u003ch2\u003eCompact support for upward-opening cabinet fronts\u003c\/h2\u003e\n\n\u003cp\u003eAVENTOS HK-XS is Blum's compact stay-lift system for small wall cabinets, tall-unit applications and overhead storage with limited internal space. When correctly selected and adjusted, the mechanism balances the cabinet front and allows it to remain at a convenient intermediate position.\u003c\/p\u003e\n\n\u003cp\u003eThe standard opening angle is approximately 105°. The final opening movement also depends on the selected hinges, and a hinge with a smaller opening angle will restrict the front accordingly. Suitable hinges, mounting plates and fixing components are therefore essential to the complete application.\u003c\/p\u003e\n\n\u003ch2\u003eSelecting the 800–1800 power factor\u003c\/h2\u003e\n\n\u003cp\u003ePower factor is calculated by multiplying the cabinet height in millimetres by the complete cabinet-front weight in kilograms, including the handle. The 800–1800 figure is a calculated application range and must never be described as a weight in grams.\u003c\/p\u003e\n\n\u003cp\u003eBlum states that the available power factor is doubled when a symmetrical HK-XS mechanism is installed on both sides. Use current Blum planning information and carry out a trial application where the calculated requirement falls within an overlapping or borderline range.\u003c\/p\u003e\n\n\u003ch2\u003eStandard operation with compatible hinges\u003c\/h2\u003e\n\n\u003cp\u003eThe 20K1501 standard mechanism is designed for an application using suitable compatible sprung hinges. Soft and controlled closing is achieved in conjunction with appropriate \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/blum-hinges-clip-top\"\u003eCLIP top BLUMOTION hinges\u003c\/a\u003e; BLUMOTION is not integrated into the HK-XS lift mechanism itself.\u003c\/p\u003e\n\n\u003cp\u003eFor a handleless cabinet front, select the separate \u003ca href=\"https:\/\/www.blum.org.uk\/products\/blum-aventos-hk-xs-lift-mechanism-800-1600-hd-tip-on-set\"\u003e20K1501T TIP-ON heavy-duty set\u003c\/a\u003e together with the required unsprung hinges and TIP-ON components. The TIP-ON version covers a different power-factor range of 800–1600 and must not be confused with this standard 800–1800 product.\u003c\/p\u003e\n\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003eGenuine Blum AVENTOS HK-XS stay-lift mechanism\u003c\/li\u003e\n\u003cli\u003eBlum article number 20K1501\u003c\/li\u003e\n\u003cli\u003eStock code HI20K1501SET\u003c\/li\u003e\n\u003cli\u003ePower-factor range of 800–1800\u003c\/li\u003e\n\u003cli\u003eStandard version, not TIP-ON\u003c\/li\u003e\n\u003cli\u003eApproximately 105° opening angle\u003c\/li\u003e\n\u003cli\u003eSymmetrical mechanism for one-sided or two-sided use\u003c\/li\u003e\n\u003cli\u003eVariable stopping positions when correctly adjusted\u003c\/li\u003e\n\u003cli\u003eCompact design for small cabinet applications\u003c\/li\u003e\n\u003cli\u003eNickel finish\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eProduct details\u003c\/h2\u003e\n\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eManufacturer:\u003c\/strong\u003e Blum\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRange:\u003c\/strong\u003e AVENTOS HK-XS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBlum article number:\u003c\/strong\u003e 20K1501\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStock code:\u003c\/strong\u003e HI20K1501SET\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Stay-lift mechanism\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVersion:\u003c\/strong\u003e Standard\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower factor:\u003c\/strong\u003e 800–1800\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpening angle:\u003c\/strong\u003e Approximately 105°, subject to hinge selection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e Symmetrical; suitable for one-sided or two-sided installation\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Nickel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCabinet height:\u003c\/strong\u003e 240–600mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum internal cabinet depth:\u003c\/strong\u003e 125mm using the standard drilling position\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupplied quantity:\u003c\/strong\u003e 1 set\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eAn internal cabinet depth of 100mm is possible only with the special drilling position specified in current Blum planning information.\u003c\/p\u003e\n\n\u003ch2\u003eFrequently asked questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat does the 800–1800 figure mean?\u003c\/h3\u003e\n\u003cp\u003eIt is the mechanism's power-factor range, not a weight in grams. Power factor is calculated from the cabinet height and complete front weight.\u003c\/p\u003e\n\n\u003ch3\u003eIs this the TIP-ON version?\u003c\/h3\u003e\n\u003cp\u003eNo. This is standard article 20K1501. The corresponding TIP-ON mechanism is article 20K1501T and covers a power-factor range of 800–1600.\u003c\/p\u003e\n\n\u003ch3\u003eDoes this lift mechanism have integrated BLUMOTION?\u003c\/h3\u003e\n\u003cp\u003eNo. Soft closing requires suitable compatible CLIP top BLUMOTION hinges. BLUMOTION is not integrated into the mechanism.\u003c\/p\u003e\n\n\u003ch3\u003eCan it be installed on both sides of the cabinet?\u003c\/h3\u003e\n\u003cp\u003eYes. The mechanism is symmetrical and may be installed on one or both sides. Using mechanisms on both sides doubles the available power factor.\u003c\/p\u003e\n\n\u003ch3\u003eAre hinges and fixing components included?\u003c\/h3\u003e\n\u003cp\u003eThe set contents are not expressly confirmed by the product record. Hinges, mounting plates, cabinet fixings, front-fixing brackets and screws should not be assumed to be included. Confirm the complete component list before ordering.\u003c\/p\u003e\n\n\u003cp\u003eBrowse the \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/blum-aventos-lifts-aventos-hk-xs\"\u003eBlum AVENTOS HK-XS range\u003c\/a\u003e to compare compatible mechanisms and related components.\u003c\/p\u003e","brand":"Blum","offers":[{"title":"Default Title","offer_id":62846483071325,"sku":"HI20K1501SET","price":10.37,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/HI20K1501SET_083d7cda-55cd-4cd1-a4cf-2fde66988740.jpg?v=1777562530","url":"https:\/\/www.blum.org.uk\/products\/blum-aventos-hk-xs-20k1501-lift-mechanism-800-1800","provider":"Hart Wholesale","version":"1.0","type":"link"}