{"product_id":"oak-flexible-wood-veneer-fs-unglued-22mm-100m","title":"VENEER FS UNGLUED OAK 22x100m","description":"\u003cp\u003e\u003cstrong\u003eOak Flexible Wood Veneer FS Unglued 22mm × 100m\u003c\/strong\u003e is a genuine real-wood edging roll designed to provide exposed furniture-board edges with the warm colour, natural texture and distinctive grain of Oak.\u003c\/p\u003e\u003cp\u003eThe veneer is fleeced and sanded but supplied \u003cstrong\u003ewithout a factory-applied adhesive\u003c\/strong\u003e. This gives furniture manufacturers, cabinet makers and professional workshops complete control over the adhesive and bonding process used for their particular substrate, equipment and production requirements.\u003c\/p\u003e\u003cp\u003eAt 22mm wide, the edging is particularly suitable for common 18mm furniture panels because it leaves a small trimming allowance on both faces. The 100m roll supports repeated workshop and production use.\u003c\/p\u003e\u003ch3\u003eWhat Does FS Mean?\u003c\/h3\u003e\u003cp\u003eFS means \u003cstrong\u003eFleeced and Sanded\u003c\/strong\u003e. A supporting fleece improves the veneer’s flexibility and stability, while the natural Oak face is sanded to provide a smooth surface for finishing.\u003c\/p\u003e\u003cp\u003eUnlike FSHM veneer, this FS product does not include a hot-melt adhesive layer. A compatible adhesive must be selected and applied separately.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural Oak veneer surface\u003c\/li\u003e\n\u003cli\u003eFleeced backing for improved flexibility and stability\u003c\/li\u003e\n\u003cli\u003ePre-sanded real-wood face\u003c\/li\u003e\n\u003cli\u003eSupplied completely unglued\u003c\/li\u003e\n\u003cli\u003eAllows control over adhesive selection and application\u003c\/li\u003e\n\u003cli\u003e22mm width suited to many standard furniture panels\u003c\/li\u003e\n\u003cli\u003e100m roll for repeated workshop or production use\u003c\/li\u003e\n\u003cli\u003eCan be trimmed and finished after bonding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for Standard Panel Edges\u003c\/h3\u003e\u003cp\u003eThe 22mm width provides useful trimming allowance when applied to many 18mm MDF, chipboard, plywood and veneered furniture panels. Once bonded securely, the small overhang can be trimmed flush with the panel faces.\u003c\/p\u003e\u003cp\u003eAlways confirm that the substrate, adhesive and pressing method are compatible before beginning production.\u003c\/p\u003e\u003ch3\u003eWhy Choose Unglued Oak Veneer?\u003c\/h3\u003e\u003cp\u003eUnglued veneer gives the user flexibility to choose a bonding system appropriate for the substrate and manufacturing process. This can be useful for workshops operating an edge-banding machine, using a specialist woodworking adhesive or working with panels that require a particular bonding method.\u003c\/p\u003e\u003cp\u003eThe absence of a pre-applied adhesive also means the veneer is not restricted to one hot-melt formulation. Adhesive selection remains the responsibility of the installer.\u003c\/p\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eAllow the veneer, adhesive and substrate to acclimatise in the same environment.\u003c\/li\u003e\n\u003cli\u003ePrepare a straight, stable, clean and dry panel edge.\u003c\/li\u003e\n\u003cli\u003eRemove dust, oil, grease and loose fibres that could weaken the bond.\u003c\/li\u003e\n\u003cli\u003eCut the veneer slightly longer than the finished component.\u003c\/li\u003e\n\u003cli\u003eSelect a compatible adhesive for the veneer, substrate and intended conditions.\u003c\/li\u003e\n\u003cli\u003eApply the adhesive according to its manufacturer’s coverage and open-time instructions.\u003c\/li\u003e\n\u003cli\u003ePosition the veneer with an even trimming allowance on both panel faces.\u003c\/li\u003e\n\u003cli\u003eApply firm, consistent pressure across the complete width and length.\u003c\/li\u003e\n\u003cli\u003eAllow the bond to develop fully before trimming or finishing.\u003c\/li\u003e\n\u003cli\u003eTrim towards the panel face to reduce the risk of splitting the natural veneer.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eAlways create a test piece using the intended substrate, adhesive, pressure and finishing system before beginning a complete production run.\u003c\/p\u003e\u003ch3\u003eFinishing Oak Veneer\u003c\/h3\u003e\u003cp\u003eOnce applied, the natural Oak surface can be finished with a compatible lacquer, oil, wax or stain. Clear finishes usually deepen the colour and emphasise the open grain, while stains can help coordinate the edging with surrounding furniture.\u003c\/p\u003e\u003cp\u003eTest the selected finish on an offcut first and avoid aggressive sanding, as decorative veneer is considerably thinner than solid Oak.\u003c\/p\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eShelf edges\u003c\/li\u003e\n\u003cli\u003eWardrobe and bedroom furniture\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and furniture components\u003c\/li\u003e\n\u003cli\u003eDoor and panel edges\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eRetail display and shopfitting units\u003c\/li\u003e\n\u003cli\u003eFurniture repairs and refurbishment\u003c\/li\u003e\n\u003cli\u003eBespoke interior joinery\u003c\/li\u003e\n\u003cli\u003eProduction edging with a separately selected adhesive\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eOak is a genuine natural material, so colour, grain, ray markings and other features will vary between rolls and batches. These variations are normal and help give the finished component an authentic real-timber appearance.\u003c\/p\u003e\u003ch3\u003eStorage and Handling\u003c\/h3\u003e\u003cp\u003eStore the roll in a clean, dry and stable environment, protected from direct sunlight, moisture, excessive heat and rapid changes in humidity. Keep the veneer supported and protect its edges from crushing or damage.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this edging made from real Oak?\u003c\/h4\u003e\u003cp\u003eYes. The visible surface is genuine natural Oak veneer rather than a printed or imitation wood-effect material.\u003c\/p\u003e\u003ch4\u003eDoes this veneer have adhesive on the back?\u003c\/h4\u003e\u003cp\u003eNo. It is an unglued FS veneer. A compatible adhesive must be selected and applied separately.\u003c\/p\u003e\u003ch4\u003eWhat is the difference between FS and FSHM veneer?\u003c\/h4\u003e\u003cp\u003eFS veneer is fleeced and sanded but unglued. FSHM veneer is fleeced, sanded and supplied with a heat-activated hot-melt adhesive.\u003c\/p\u003e\u003ch4\u003eIs 22mm edging suitable for 18mm furniture board?\u003c\/h4\u003e\u003cp\u003eYes. It normally provides a small overhang on both faces of an 18mm panel, allowing it to be trimmed flush after bonding.\u003c\/p\u003e\u003ch4\u003eCan it be applied with an ordinary iron?\u003c\/h4\u003e\u003cp\u003eNo adhesive is present to activate with an iron. A separate compatible bonding system must first be selected and applied.\u003c\/p\u003e\u003ch4\u003eCan the Oak veneer be stained or oiled?\u003c\/h4\u003e\u003cp\u003eYes. It accepts many compatible wood stains, oils, lacquers and waxes. Test the selected finish first because it will alter the natural colour.\u003c\/p\u003e\u003cscript type=\"application\/ld+json\"\u003e{\"@context\":\"https:\/\/schema.org\",\"@type\":\"FAQPage\",\"mainEntity\":[{\"@type\":\"Question\",\"name\":\"Is this edging made from real Oak?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. The visible surface is genuine natural Oak veneer rather than a printed wood-effect material.\"}},{\"@type\":\"Question\",\"name\":\"Does this Oak veneer have adhesive on the back?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. It is an unglued FS veneer and requires a compatible adhesive to be selected and applied separately.\"}},{\"@type\":\"Question\",\"name\":\"What is the difference between FS and FSHM veneer?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"FS veneer is fleeced and sanded but unglued. FSHM veneer is fleeced, sanded and supplied with a heat-activated hot-melt adhesive.\"}},{\"@type\":\"Question\",\"name\":\"Is 22mm veneer edging suitable for 18mm board?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Yes. It normally leaves a small overhang on both faces of an 18mm panel so it can be trimmed flush after bonding.\"}},{\"@type\":\"Question\",\"name\":\"Can unglued Oak veneer edging be applied with an iron?\",\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No adhesive is present to activate with an iron. A separate compatible bonding system must be selected and applied.\"}}]}\u003c\/script\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"UNION VENEERS LTD","offers":[{"title":"Default Title","offer_id":62849802076509,"sku":"VEN033D","price":31.57,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN033D.jpg?v=1784618931","url":"https:\/\/www.blum.org.uk\/products\/oak-flexible-wood-veneer-fs-unglued-22mm-100m","provider":"Hart Wholesale","version":"1.0","type":"link"}