{"product_id":"oak-pre-glued-flexible-wood-veneer-fshm-50mm-50m","title":"VENEER FSHM OAK 50x050m","description":"\u003cp\u003e\u003cstrong\u003eOak Flexible Wood Veneer FSHM 50mm × 50m Pre-Glued\u003c\/strong\u003e is a genuine real-wood edging roll with a factory-applied, heat-activated adhesive. It provides an efficient way to cover exposed board edges with the natural colour, texture and grain of real Oak.\u003c\/p\u003e\u003cp\u003eThe substantial 50mm width is designed for wider furniture components, deep shelves, door edges, worktop details, repair sections and joinery where conventional narrow edge banding does not provide sufficient coverage.\u003c\/p\u003e\u003cp\u003eSupplied in a manageable 50m roll, it is well suited to individual contracts, furniture workshops, refurbishment projects and lower-volume production where a full industrial-length roll is unnecessary.\u003c\/p\u003e\u003ch3\u003eWhy Choose Oak FSHM Veneer Edging?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural Oak wood veneer\u003c\/li\u003e\n\u003cli\u003eWarm colouring with distinctive open hardwood grain\u003c\/li\u003e\n\u003cli\u003eFactory-applied heat-activated adhesive\u003c\/li\u003e\n\u003cli\u003eWide 50mm format for deeper components and repair areas\u003c\/li\u003e\n\u003cli\u003ePractical 50m roll length\u003c\/li\u003e\n\u003cli\u003eNo separate adhesive application normally required\u003c\/li\u003e\n\u003cli\u003eCan be trimmed, lightly sanded and finished after bonding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWide 50mm Coverage\u003c\/h3\u003e\u003cp\u003eThe 50mm width makes this veneer suitable for components that cannot be covered using standard narrow edging. It can also be used where generous trimming allowance is required or where a damaged edge needs greater coverage during refurbishment.\u003c\/p\u003e\u003cp\u003eTypical uses include wide shelves, substantial cabinet components, door edges, furniture frames, plinths, worktop details and bespoke joinery sections.\u003c\/p\u003e\u003ch3\u003eHeat-Activated Pre-Glued Backing\u003c\/h3\u003e\u003cp\u003eThe reverse of the veneer has a factory-applied hot-melt adhesive. Controlled heat softens the adhesive, allowing the veneer to bond to a clean and properly prepared panel edge.\u003c\/p\u003e\u003cp\u003eSuccessful application depends on the correct combination of temperature, heating time and pressure. Always test the process on an offcut made from the intended substrate before completing the finished component.\u003c\/p\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eAllow the veneer and substrate to acclimatise in the same environment.\u003c\/li\u003e\n\u003cli\u003ePrepare a straight, clean, dry edge free from dust, grease and loose fibres.\u003c\/li\u003e\n\u003cli\u003eCut the veneer slightly longer than the component.\u003c\/li\u003e\n\u003cli\u003ePosition the veneer so that sufficient material overhangs both faces.\u003c\/li\u003e\n\u003cli\u003eActivate the adhesive using suitable, evenly controlled heat.\u003c\/li\u003e\n\u003cli\u003eApply firm pressure immediately using an edging block or appropriate equipment.\u003c\/li\u003e\n\u003cli\u003eContinue pressing while the adhesive cools and sets.\u003c\/li\u003e\n\u003cli\u003eCheck the entire width and length for securely bonded areas.\u003c\/li\u003e\n\u003cli\u003eAllow the veneer to cool before trimming the overhang flush.\u003c\/li\u003e\n\u003cli\u003eLightly finish the edge and apply a compatible coating if required.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eAvoid applying excessive heat, as this could scorch or discolour the Oak surface. When using a hand iron, place a suitable protective sheet between the heated surface and the veneer.\u003c\/p\u003e\u003ch3\u003eFinishing Oak Veneer\u003c\/h3\u003e\u003cp\u003eThe genuine Oak face can be finished with a compatible clear lacquer, oil, wax or stain. Clear oil and lacquer generally deepen the natural colour and emphasise the open grain, while stains can be used to coordinate the edging with surrounding furniture.\u003c\/p\u003e\u003cp\u003eAlways test the selected finish on an offcut first. Avoid aggressive sanding because decorative veneer is much thinner than solid Oak.\u003c\/p\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eAs this is genuine Oak, colour, grain, ray markings and natural features will vary between rolls and batches. These variations are normal and give the finished edge an authentic real-timber appearance.\u003c\/p\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWide shelving and furniture panels\u003c\/li\u003e\n\u003cli\u003eCabinet and cupboard components\u003c\/li\u003e\n\u003cli\u003eDoor and frame edges\u003c\/li\u003e\n\u003cli\u003eWorktop and counter details\u003c\/li\u003e\n\u003cli\u003ePlinths and substantial furniture sections\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eRetail and display fixtures\u003c\/li\u003e\n\u003cli\u003eEdge repairs and furniture refurbishment\u003c\/li\u003e\n\u003cli\u003eBespoke architectural joinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eStorage and Handling\u003c\/h3\u003e\u003cp\u003eStore the roll in a clean, dry and stable environment, protected from direct sunlight, excessive heat and changing humidity. Keep the veneer carefully supported to prevent crushed edges, creasing or damage to the adhesive backing.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this veneer made from real Oak?\u003c\/h4\u003e\u003cp\u003eYes. The visible face is genuine natural Oak veneer, so colour and grain will vary between rolls.\u003c\/p\u003e\u003ch4\u003eIs the veneer supplied pre-glued?\u003c\/h4\u003e\u003cp\u003eYes. The FSHM backing has a factory-applied heat-activated adhesive.\u003c\/p\u003e\u003ch4\u003eWhat is the advantage of the 50mm width?\u003c\/h4\u003e\u003cp\u003eThe wider format can cover deeper furniture components, broad edges and repair areas that cannot be finished with standard narrow edge banding.\u003c\/p\u003e\u003ch4\u003eCan it be applied with an ordinary iron?\u003c\/h4\u003e\u003cp\u003eA suitable temperature-controlled iron may be used for appropriate workshop applications, but the veneer must be protected from direct heat. Test the temperature, heating time and pressure on an offcut first.\u003c\/p\u003e\u003ch4\u003eCan the Oak veneer be stained?\u003c\/h4\u003e\u003cp\u003eYes. It can be stained or clear-finished, but the selected product should always be tested first because coatings will alter the natural colour.\u003c\/p\u003e\u003ch4\u003eIs this product suitable for exterior use?\u003c\/h4\u003e\u003cp\u003eIt is primarily intended for furniture and interior joinery. Exterior suitability depends on the substrate, adhesive bond, sealing system and exposure conditions.\u003c\/p\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or visit the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"SMC WHOLESALE","offers":[{"title":"Default Title","offer_id":62849802010973,"sku":"VEN033C21","price":48.14,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN033C21_e38f2579-dd23-4277-a8de-b290eda98397.jpg?v=1784618931","url":"https:\/\/www.blum.org.uk\/products\/oak-pre-glued-flexible-wood-veneer-fshm-50mm-50m","provider":"Hart Wholesale","version":"1.0","type":"link"}