{"product_id":"pine-pre-glued-wood-veneer-edging-fshm-25mm-100m","title":"VENEER FSHM PINE 25x100m","description":"\u003ch2\u003ePine Flexible Wood Veneer FSHM 25mm x 100m Pre-Glued\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003ePine Flexible Wood Veneer FSHM 25mm x 100m\u003c\/strong\u003e is a genuine real-wood edging roll with a factory-applied heat-activated adhesive. It is designed to cover exposed furniture-board edges with the light colour, natural grain and familiar character of pine.\u003c\/p\u003e\u003cp\u003eThe 25mm width provides useful additional coverage compared with narrower edging and leaves a practical trimming allowance on many commonly used furniture panels. Its long 100m roll is ideal for workshop use, repeated cabinet edging and furniture-production applications.\u003c\/p\u003e\u003cp\u003eNatural pine has a light cream-to-pale golden colour that works particularly well with pine-faced boards, pale softwood furniture and rustic or traditionally styled interiors. It can also be stained or finished to coordinate with surrounding furniture components.\u003c\/p\u003e\u003ch3\u003eWhat Does FSHM Mean?\u003c\/h3\u003e\u003cp\u003eFSHM refers to veneer that is \u003cstrong\u003eFleeced, Sanded and supplied with Hot-Melt adhesive\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe fleece helps support and stabilise the thin natural veneer during handling. The visible pine face is sanded smooth, while the reverse carries a factory-applied hot-melt adhesive.\u003c\/p\u003e\u003cp\u003eHeat and firm pressure activate the adhesive, removing the need to apply a separate glue in normal compatible applications.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural pine veneer\u003c\/li\u003e\n\u003cli\u003eFactory-applied heat-activated adhesive\u003c\/li\u003e\n\u003cli\u003eFleeced backing for flexibility and stability\u003c\/li\u003e\n\u003cli\u003eSmooth, sanded real-wood surface\u003c\/li\u003e\n\u003cli\u003eLight natural colour with visible pine grain\u003c\/li\u003e\n\u003cli\u003ePractical 25mm width\u003c\/li\u003e\n\u003cli\u003e100m roll for workshop and production use\u003c\/li\u003e\n\u003cli\u003eNo separate adhesive normally required\u003c\/li\u003e\n\u003cli\u003eCan be trimmed and finished after application\u003c\/li\u003e\n\u003cli\u003eSuitable for cabinets, shelving and furniture\u003c\/li\u003e\n\u003cli\u003eAccepts compatible stains, oils, waxes and lacquers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eShelf and bookcase edges\u003c\/li\u003e\n\u003cli\u003eWardrobe and bedroom furniture\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and cabinet components\u003c\/li\u003e\n\u003cli\u003eDoor and furniture-panel edges\u003c\/li\u003e\n\u003cli\u003ePine-faced MDF and plywood\u003c\/li\u003e\n\u003cli\u003eSoftwood furniture manufacture\u003c\/li\u003e\n\u003cli\u003eShopfitting and display units\u003c\/li\u003e\n\u003cli\u003eFurniture repairs and restoration\u003c\/li\u003e\n\u003cli\u003eDecorative trims and mouldings\u003c\/li\u003e\n\u003cli\u003eRustic and traditional interiors\u003c\/li\u003e\n\u003cli\u003eBespoke interior joinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Choose 25mm Edging?\u003c\/h3\u003e\u003cp\u003eThe 25mm width provides more working allowance than standard narrow veneer edging. This is useful where the panel edge varies slightly in thickness or where additional material is preferred for accurate trimming.\u003c\/p\u003e\u003cp\u003eOnce the adhesive has cooled, the excess veneer can be trimmed flush with both faces of the board to create a clean and consistent edge.\u003c\/p\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003cp\u003ePrepare a straight, smooth, dry and stable panel edge. Remove all dust, grease, oil and loose fibres before positioning the veneer.\u003c\/p\u003e\u003cp\u003eCut the veneer slightly longer than the finished component. Position it with an even trimming allowance and activate the adhesive using a suitable edge-banding machine, veneer iron or controlled heat source.\u003c\/p\u003e\u003cp\u003eWork progressively along the panel while applying consistent heat and firm pressure. Allow the adhesive to cool fully before trimming or finishing the veneer.\u003c\/p\u003e\u003cp\u003eApplication settings can vary according to the equipment, substrate and working conditions. Always produce a test piece before starting a complete production run.\u003c\/p\u003e\u003ch3\u003eTrimming and Finishing Pine Veneer\u003c\/h3\u003e\u003cp\u003eTrim the excess material using a sharp veneer trimmer or suitable cutting tool. Pine is a comparatively soft timber, so use sharp tools and avoid excessive pressure that could bruise or tear the surface.\u003c\/p\u003e\u003cp\u003eThe veneer can be lightly sanded and finished with a compatible lacquer, oil, wax, clear coat or wood stain. A clear finish will normally warm the natural colour and emphasise the grain.\u003c\/p\u003e\u003cp\u003ePine can absorb some stains unevenly, so always test the complete finishing system on an offcut first. Where appropriate, use a compatible sanding sealer or wood conditioner recommended by the finish manufacturer.\u003c\/p\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003ePine is a genuine natural material. Grain pattern, colour, growth markings and other features will vary between sections and production batches. These variations are normal and contribute to the authentic appearance of the finished furniture.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this made from real pine?\u003c\/h4\u003e\u003cp\u003eYes. The visible surface is genuine natural pine veneer rather than a printed wood-effect material.\u003c\/p\u003e\u003ch4\u003eDoes it already have adhesive applied?\u003c\/h4\u003e\u003cp\u003eYes. It has a factory-applied hot-melt adhesive that is activated using controlled heat and pressure.\u003c\/p\u003e\u003ch4\u003eIs this veneer unglued?\u003c\/h4\u003e\u003cp\u003eNo. This is the pre-glued FSHM version. An unglued product would normally be described as FS veneer.\u003c\/p\u003e\u003ch4\u003eCan it be applied with an iron?\u003c\/h4\u003e\u003cp\u003eA suitable veneer iron or controlled heat source can be used. An edge-banding machine may give more consistent results during production work.\u003c\/p\u003e\u003ch4\u003eCan the pine veneer be stained?\u003c\/h4\u003e\u003cp\u003eYes, but pine can sometimes absorb stain unevenly. Test the stain and any recommended conditioner or sealer on an offcut first.\u003c\/p\u003e\u003ch4\u003eWhat size roll will I receive?\u003c\/h4\u003e\u003cp\u003eThis product is supplied as one roll measuring 25mm wide by 100m long.\u003c\/p\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"MERENDA LTD","offers":[{"title":"Default Title","offer_id":62849802633565,"sku":"VEN035A","price":20.42,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN035A.jpg?v=1784619197","url":"https:\/\/www.blum.org.uk\/products\/pine-pre-glued-wood-veneer-edging-fshm-25mm-100m","provider":"Hart Wholesale","version":"1.0","type":"link"}