{"product_id":"sapele-pre-glued-wood-veneer-edging-fshm-22mm-100m","title":"VENEER FSHM SAPELE 22x100m","description":"\u003ch2\u003eSapele Flexible Wood Veneer FSHM 22mm x 100m Pre-Glued\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eSapele Flexible Wood Veneer FSHM 22mm x 100m\u003c\/strong\u003e is a genuine real-wood edging roll with a factory-applied heat-activated adhesive. It is designed to give exposed furniture-board edges the rich reddish-brown colour, fine texture and distinctive natural character of Sapele.\u003c\/p\u003e\u003cp\u003eSapele is valued for its warm golden-to-deep reddish-brown colouring and attractive grain, which may display straight, interlocked or ribbon-like figure depending on the cut. Its sophisticated appearance makes it particularly suitable for high-quality furniture, cabinetry, doors, fitted interiors and decorative joinery.\u003c\/p\u003e\u003cp\u003eAt 22mm wide, the veneer is well suited to many standard furniture panels. When used on common 18mm board, it normally provides a small trimming allowance on both faces. The 100m roll supports repeated workshop use and production edging.\u003c\/p\u003e\u003ch3\u003eWhat Does FSHM Mean?\u003c\/h3\u003e\u003cp\u003eFSHM refers to veneer that is \u003cstrong\u003eFleeced, Sanded and supplied with Hot-Melt adhesive\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe supporting fleece improves the flexibility and stability of the natural veneer. The visible Sapele face is sanded smooth, while the reverse carries a factory-applied hot-melt adhesive.\u003c\/p\u003e\u003cp\u003eThe adhesive is activated using controlled heat and firm pressure, so a separate glue does not normally need to be applied.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural Sapele veneer\u003c\/li\u003e\n\u003cli\u003eRich golden-to-reddish-brown colour\u003c\/li\u003e\n\u003cli\u003eFine texture with attractive natural grain\u003c\/li\u003e\n\u003cli\u003eFactory-applied heat-activated adhesive\u003c\/li\u003e\n\u003cli\u003eFleeced backing for flexibility and stability\u003c\/li\u003e\n\u003cli\u003eSmooth, sanded real-wood face\u003c\/li\u003e\n\u003cli\u003e22mm width suited to many standard panels\u003c\/li\u003e\n\u003cli\u003eLong 100m roll for workshop use\u003c\/li\u003e\n\u003cli\u003eNo separate adhesive normally required\u003c\/li\u003e\n\u003cli\u003eCan be trimmed and finished after bonding\u003c\/li\u003e\n\u003cli\u003eSuitable for furniture, cabinets and joinery\u003c\/li\u003e\n\u003cli\u003eAccepts compatible oils, stains and lacquers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCabinet and cupboard edging\u003c\/li\u003e\n\u003cli\u003eShelf and bookcase edges\u003c\/li\u003e\n\u003cli\u003eWardrobe and bedroom furniture\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and furniture components\u003c\/li\u003e\n\u003cli\u003eDoor and panel edges\u003c\/li\u003e\n\u003cli\u003eSapele-faced MDF and plywood\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eRetail displays and shopfitting\u003c\/li\u003e\n\u003cli\u003eFurniture repairs and restoration\u003c\/li\u003e\n\u003cli\u003eDecorative trims and fitted interiors\u003c\/li\u003e\n\u003cli\u003eBespoke furniture manufacture\u003c\/li\u003e\n\u003cli\u003eInterior architectural joinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable for Standard Furniture Panels\u003c\/h3\u003e\u003cp\u003eThe 22mm width is particularly useful for edging common 18mm MDF, chipboard, plywood and veneered furniture board. It provides sufficient material to cover the exposed edge while normally leaving a small overhang for trimming flush.\u003c\/p\u003e\u003cp\u003eAlways measure the actual panel thickness before cutting and applying the veneer.\u003c\/p\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003cp\u003eAllow the veneer and panel material to acclimatise in the same working environment. Prepare a straight, smooth, clean and dry edge, removing dust, grease, oil and loose fibres.\u003c\/p\u003e\u003cp\u003eCut the veneer slightly longer than the finished component. Position it with an even trimming allowance and activate the adhesive using a suitable edge-banding machine, veneer iron or controlled heat source.\u003c\/p\u003e\u003cp\u003eWork progressively along the component, applying consistent heat and firm pressure. Allow the adhesive to cool and form its bond before trimming.\u003c\/p\u003e\u003cp\u003eApplication requirements vary according to the substrate, equipment and working environment. Always test the veneer and settings on an offcut before starting a full production run.\u003c\/p\u003e\u003ch3\u003eTrimming and Finishing\u003c\/h3\u003e\u003cp\u003eOnce the adhesive has cooled, trim the excess veneer flush with the panel faces using a sharp veneer trimmer or suitable cutting tool.\u003c\/p\u003e\u003cp\u003eSapele can have interlocked grain, so pay careful attention to grain direction when trimming. Use sharp tools and take light passes to reduce the risk of lifting or tearing the natural surface.\u003c\/p\u003e\u003cp\u003eThe sanded veneer can be finished with a compatible clear lacquer, oil, wax or wood stain. Clear finishes generally deepen the reddish-brown colour and highlight Sapele’s natural lustre and figure.\u003c\/p\u003e\u003cp\u003eAvoid aggressive sanding because decorative veneer is much thinner than solid timber. Test the complete finishing system on an offcut first.\u003c\/p\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eSapele is a genuine natural material. Colour, grain direction, ribbon figure and other markings will vary between sections and production batches. These differences are normal and contribute to the authentic appearance of real-wood edging. Sapele commonly ranges from golden brown to deeper reddish brown and may darken after finishing or with age.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this genuine Sapele veneer?\u003c\/h4\u003e\u003cp\u003eYes. The visible surface is genuine natural Sapele rather than a printed or imitation wood-effect material.\u003c\/p\u003e\u003ch4\u003eDoes it have adhesive on the back?\u003c\/h4\u003e\u003cp\u003eYes. It has a factory-applied hot-melt adhesive activated using controlled heat and pressure.\u003c\/p\u003e\u003ch4\u003eIs 22mm veneer suitable for 18mm furniture board?\u003c\/h4\u003e\u003cp\u003eYes. It normally leaves a small overhang on both faces of an 18mm panel, allowing the veneer to be trimmed flush after bonding.\u003c\/p\u003e\u003ch4\u003eIs Sapele the same as mahogany?\u003c\/h4\u003e\u003cp\u003eNo. Sapele is a separate timber species, although its warm reddish-brown appearance is often associated with mahogany-style furniture and joinery.\u003c\/p\u003e\u003ch4\u003eCan it be applied using an iron?\u003c\/h4\u003e\u003cp\u003eA suitable veneer iron or controlled heat source can be used. An appropriate edge-banding machine may provide more consistent results for production work.\u003c\/p\u003e\u003ch4\u003eCan Sapele veneer be stained or lacquered?\u003c\/h4\u003e\u003cp\u003eYes. It accepts many compatible wood stains, oils and lacquers. Always test the chosen finish on an offcut first.\u003c\/p\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"MERENDA LTD","offers":[{"title":"Default Title","offer_id":62849803223389,"sku":"VEN037A","price":17.67,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN037A_3df6fb4c-ed9c-44cc-b024-f75cd8943b73.jpg?v=1784618629","url":"https:\/\/www.blum.org.uk\/products\/sapele-pre-glued-wood-veneer-edging-fshm-22mm-100m","provider":"Hart Wholesale","version":"1.0","type":"link"}