{"product_id":"white-oak-pre-glued-veneer-edging-fshm-50mm-50m","title":"VENEER FSHM OAK\/WHITE 50x50m","description":"\u003ch2\u003eWhite Oak Flexible Wood Veneer FSHM 50mm x 50m Pre-Glued\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eWhite Oak Flexible Wood Veneer FSHM 50mm x 50m\u003c\/strong\u003e is a wide-format real-wood edging roll with a factory-applied heat-activated adhesive. It is designed to give exposed furniture-board edges the natural colour, grain and texture of genuine White Oak.\u003c\/p\u003e\u003cp\u003eThe 50mm width provides ample coverage for wide panel edges, thicker furniture components and applications where additional trimming allowance is needed. The more compact 50m roll is particularly convenient for bespoke furniture projects, repair work, smaller production runs and workshops that do not require a full 100m roll.\u003c\/p\u003e\u003cp\u003eWhite Oak’s pale-to-medium golden colouring and recognisable grain suit both traditional and contemporary interiors. It can be used to coordinate exposed edges with White Oak-faced MDF, plywood, veneered panels, cabinet doors and other natural oak furniture components.\u003c\/p\u003e\u003ch3\u003eWhat Does FSHM Mean?\u003c\/h3\u003e\u003cp\u003eFSHM refers to veneer that is \u003cstrong\u003eFleeced, Sanded and supplied with Hot-Melt adhesive\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eThe supporting fleece improves flexibility and stability during handling. The genuine White Oak face is sanded to produce a smooth surface, while the factory-applied hot-melt adhesive eliminates the need to spread a separate adhesive in normal compatible applications.\u003c\/p\u003e\u003cp\u003eHeat and firm pressure activate the adhesive, allowing the veneer to be applied using suitable workshop equipment or a controlled veneer iron.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eGenuine natural White Oak veneer\u003c\/li\u003e\n\u003cli\u003eFactory-applied heat-activated adhesive\u003c\/li\u003e\n\u003cli\u003eFleeced backing for flexibility and stability\u003c\/li\u003e\n\u003cli\u003eSmooth, sanded real-wood face\u003c\/li\u003e\n\u003cli\u003eAttractive pale-to-medium oak colouring\u003c\/li\u003e\n\u003cli\u003eWide 50mm format for substantial edges\u003c\/li\u003e\n\u003cli\u003eConvenient 50m roll for smaller production runs\u003c\/li\u003e\n\u003cli\u003eNo separate adhesive application normally required\u003c\/li\u003e\n\u003cli\u003eCan be trimmed and finished after application\u003c\/li\u003e\n\u003cli\u003eSuitable for cabinet making, furniture and joinery\u003c\/li\u003e\n\u003cli\u003eAccepts compatible stains, oils, waxes and lacquers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSuitable Applications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWide cabinet and cupboard edges\u003c\/li\u003e\n\u003cli\u003eThick shelves and furniture panels\u003c\/li\u003e\n\u003cli\u003eDrawer fronts and furniture components\u003c\/li\u003e\n\u003cli\u003eDoor and large panel edges\u003c\/li\u003e\n\u003cli\u003eLayered or built-up boards\u003c\/li\u003e\n\u003cli\u003eWhite Oak-faced MDF and plywood\u003c\/li\u003e\n\u003cli\u003eWardrobes and fitted furniture\u003c\/li\u003e\n\u003cli\u003eOffice and reception furniture\u003c\/li\u003e\n\u003cli\u003eShopfitting and retail displays\u003c\/li\u003e\n\u003cli\u003eFurniture restoration and repairs\u003c\/li\u003e\n\u003cli\u003eDecorative trims and interior joinery\u003c\/li\u003e\n\u003cli\u003eBespoke or short-run furniture production\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhy Choose the 50m Roll?\u003c\/h3\u003e\u003cp\u003eThe 50m roll offers the same wide 50mm coverage as the longer version but in a more manageable quantity. It is suitable for workshops completing occasional edging work, individual fitted-furniture installations, restoration projects and shorter manufacturing runs.\u003c\/p\u003e\u003cp\u003eThe reduced roll length also requires less storage space and can help minimise surplus material where a full 100m roll is unnecessary.\u003c\/p\u003e\u003ch3\u003eApplication Guidance\u003c\/h3\u003e\u003cp\u003eAllow the veneer and panel material to acclimatise in the same working environment before installation. Prepare a straight, smooth, clean and dry panel edge, removing dust, oil, grease and loose material.\u003c\/p\u003e\u003cp\u003eCut the veneer slightly longer than the component and position it with sufficient trimming allowance. Activate the hot-melt adhesive using a suitable edge-banding machine, veneer iron or controlled heat source.\u003c\/p\u003e\u003cp\u003eApply firm, consistent pressure while the adhesive is warm, working progressively along the edge. The quality of the finished bond depends on achieving the correct combination of heat, movement and pressure.\u003c\/p\u003e\u003cp\u003eAllow the adhesive to cool properly before trimming or finishing. Always test the intended equipment and settings on an offcut before beginning the main project.\u003c\/p\u003e\u003ch3\u003eTrimming and Finishing\u003c\/h3\u003e\u003cp\u003eAfter the adhesive has cooled, trim the excess veneer flush with the panel faces using a sharp veneer trimmer or suitable cutting tool. Follow the grain direction where possible to reduce the risk of tearing or splitting the natural wood surface.\u003c\/p\u003e\u003cp\u003eThe White Oak face can then be lightly sanded and finished with a compatible clear lacquer, oil, wax or wood stain. Clear finishes generally deepen the natural colour and highlight the grain, while stains can help coordinate the edging with an existing furniture finish.\u003c\/p\u003e\u003cp\u003eAvoid aggressive sanding because decorative veneer is considerably thinner than solid timber. Test the chosen finish on an offcut first.\u003c\/p\u003e\u003ch3\u003eNatural Wood Variation\u003c\/h3\u003e\u003cp\u003eWhite Oak is a natural material, so variations in colour, grain, figure and ray markings should be expected. These differences are normal and help create the authentic appearance associated with genuine timber.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eIs this genuine White Oak?\u003c\/h4\u003e\u003cp\u003eYes. The visible surface is genuine natural White Oak veneer rather than a printed wood-effect material.\u003c\/p\u003e\u003ch4\u003eIs adhesive already applied?\u003c\/h4\u003e\u003cp\u003eYes. The back has a factory-applied hot-melt adhesive that is activated with controlled heat and pressure.\u003c\/p\u003e\u003ch4\u003eWhat is the difference between FSHM and unglued FS veneer?\u003c\/h4\u003e\u003cp\u003eFSHM veneer includes a heat-activated adhesive layer. FS veneer is fleeced and sanded but requires a separately selected adhesive.\u003c\/p\u003e\u003ch4\u003eWhy choose a 50mm-wide veneer?\u003c\/h4\u003e\u003cp\u003eThe additional width accommodates substantial panel edges and provides generous material for trimming flush after bonding.\u003c\/p\u003e\u003ch4\u003eIs this the 50m or 100m roll?\u003c\/h4\u003e\u003cp\u003eThis product is the 50mm-wide × 50m-long roll. The 100m version is a separate product.\u003c\/p\u003e\u003ch4\u003eCan it be applied with an iron?\u003c\/h4\u003e\u003cp\u003eA suitable veneer iron or controlled heat source can be used. An appropriate edge-banding machine may provide more consistent results for production work.\u003c\/p\u003e\u003ch4\u003eCan the veneer be stained or oiled?\u003c\/h4\u003e\u003cp\u003eYes. White Oak accepts many compatible stains, oils, waxes and lacquers. Always test the finish first.\u003c\/p\u003e\u003cp\u003eBrowse our complete \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-veneer-edging\"\u003ereal wood veneer edging collection\u003c\/a\u003e, compare our \u003ca href=\"https:\/\/www.blum.org.uk\/collections\/veneers-edgings-sheet-veneer\"\u003eflexible sheet veneers\u003c\/a\u003e, or explore the full \u003ca href=\"https:\/\/www.blum.org.uk\/pages\/veneers-edgings\"\u003eveneers and edgings range\u003c\/a\u003e.\u003c\/p\u003e","brand":"SMC WHOLESALE","offers":[{"title":"Default Title","offer_id":62849802568029,"sku":"VEN034B","price":47.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0968\/4100\/7453\/files\/VEN034B.jpg?v=1784619198","url":"https:\/\/www.blum.org.uk\/products\/white-oak-pre-glued-veneer-edging-fshm-50mm-50m","provider":"Hart Wholesale","version":"1.0","type":"link"}