Give an original Blum AVENTOS HF bi-fold lift installation a clean cabinet-side finish with the 20F8000 cover-cap set in silk white. The two handed large covers conceal the left and right lift-mechanism housings, while the pair of round caps finishes the exposed circular openings shown on the matching mechanism covers.

This genuine four-piece Blum set is intended for the original AVENTOS HF generation in a standard, non-SERVO-DRIVE configuration. It is suitable for an accurately matched replacement or for completing an installation built around the corresponding legacy HF hardware. Check the existing mechanism and part number before ordering.

Finishing covers for original AVENTOS HF

AVENTOS HF is a bi-fold lift system in which a two-part cabinet front folds as it rises. The cover caps sit over the cabinet-side mechanism housings after the correctly selected lift mechanisms and arms have been installed and adjusted.

Part 20F8000 belongs to an older cover design and must not be confused with later 20F8020 covers or the common 22.8000 AVENTOS top cover system. Similar colour names and left/right descriptions do not prove that their profiles or fixing points are interchangeable.

Pack contents

• 1 × large left cover cap
• 1 × large right cover cap
• 2 × round cover caps

The set does not include lift mechanisms, telescopic arms, hinges, mounting plates, screws or any SERVO-DRIVE electrical components.

Product specifications

Compatibility checks

1. Confirm the cabinet uses the original AVENTOS HF bi-fold lift system.
2. Check the existing cover or purchasing record for part number 20F8000.
3. Match Hart SKU HI20F800W and barcode 9002617779813.
4. Confirm that standard covers without SERVO-DRIVE switch provision are required.
5. Compare the left/right cover profiles, circular openings and attachment points.
6. Check that silk white matches the existing cabinet hardware.

Other components are required

A functioning AVENTOS HF installation also requires lift mechanisms and telescopic arms selected for the cabinet height and combined front weight, suitable centre and cabinet hinges, mounting plates and front-fixing hardware. These covers are cosmetic finishing parts and do not support, lift or control the cabinet front.

Frequently asked questions

Is this set supplied as a left and right pair?

Yes. It includes one large left cover and one large right cover, plus two round caps.

What colour is the set?

Hart identifies this version as silk white. Match the finish to the existing installation because other colour versions were also manufactured.

Is 20F8000 the same as 20F8020?

No interchangeability claim should be made. They are separate Blum part numbers from different cover families. Match the exact original number and physical fitting.

Does it fit AVENTOS HF top?

Do not claim that it does. Part 20F8000 belongs to the original AVENTOS HF generation; HF top uses a different component system.

Can it be used with SERVO-DRIVE?

This standard set has no documented SERVO-DRIVE switches or switch provision. Use the correct powered-system cover set specified for the existing installation.

Are the lift mechanisms included?

No. This listing is only for the cover-cap set. Mechanisms, arms, hinges and fixing hardware are separate.

Browse the Blum AVENTOS HF and HF top range for related legacy and current components.