The Blum AVENTOS HS 20S3500.06 lever arm set is designed for original-generation AVENTOS HS lift systems with cabinet heights from 350 to 800 mm. The arms guide a single-piece cabinet front upwards and over the cabinet, providing the distinctive AVENTOS HS up-and-over opening movement.

This is the standard mechanical lever-arm set. It connects the correctly selected AVENTOS HS lift mechanisms to the cabinet front but is not a complete lift system. Lift mechanisms, cross stabiliser, front fixing brackets and cover-cap components must be selected separately.

Pack contents

• 1 x left-hand lever arm
• 1 x right-hand lever arm
• 2 x cross-stabiliser cover caps

Key features

• Original Blum AVENTOS HS component
• Suitable for cabinet heights from 350–800 mm
• Creates an up-and-over movement for a single-piece front
• Designed for correctly configured cabinets up to 1800 mm wide
• Steel construction with a nickel finish
• Supplied as a left and right arm set
• For the standard mechanical AVENTOS HS system

Selecting the lift mechanisms

The lever arms do not determine the permissible front weight by themselves. Select the original AVENTOS HS lift mechanisms according to the cabinet height and total front weight, including the handle.

The permissible front-weight range changes with cabinet height. Use the Blum Product Configurator to confirm the correct lift mechanisms and complete component specification for the individual cabinet.

Required separately

• Correctly selected original AVENTOS HS lift mechanisms
• Cross stabiliser cut to the required cabinet width
• Suitable front fixing brackets
• Standard AVENTOS HS cover-cap set
• Any application-specific fixing components

Compatibility warning

Check the system before ordering: 20S3500.06 belongs to the original AVENTOS HS range and is intended for the standard mechanical system. It is not the 21S3500.01 SERVO-DRIVE arm set and must not be substituted where the application requires the SERVO-DRIVE version.

This component is also different from AVENTOS HS top. Do not combine original 20S-series AVENTOS HS components with current-generation HS top parts unless compatibility has been specifically confirmed by Blum. AVENTOS HS uses an up-and-over movement; it is not an AVENTOS HL parallel lift or an AVENTOS HF bi-fold lift.

Product details

• Brand: Blum
• Range: Original AVENTOS HS
• Component: Standard lever arm set
• Movement: Up-and-over lift for a single-piece front
• Cabinet-height application: 350–800 mm
• Maximum cabinet width: 1800 mm
• Manufacturer part number: 20S3500.06
• Hart SKU: HI20S3500
• Material: Steel
• Finish: Nickel
• Complete lift kit: No — additional AVENTOS HS components are required

Browse the Blum AVENTOS lift systems and components to find related mechanisms and installation parts.