Blum 70T9550.TL CLIP Top 95° Overlay Unsprung Profile Door Hinge

The Blum 70T9550.TL CLIP top hinge is an unsprung concealed hinge designed for full-overlay cabinet doors with thick fronts, shaped edges or decorative profiles. Its specialised hinge geometry provides the additional clearance required where a conventional cabinet hinge could cause a thick or moulded door edge to contact the cabinet during opening.

The controlled 95° opening angle provides practical access while helping protect the door edge and adjacent furniture. In a full-overlay application, the closed cabinet door covers most of the cabinet side, producing a clean and continuous appearance.

This is an unsprung hinge, so it does not pull the door into the closed position. Its free-moving action makes it suitable for handleless cabinets operated by a compatible Blum TIP-ON for doors push-to-open mechanism.

Screw-on fixing with tool-free CLIP assembly

The hinge cup is secured to the back of the cabinet door using screws. This provides a reliable mechanical fixing for bespoke furniture, replacement work and workshop production.

Once fitted to the door, the hinge arm connects to a compatible Blum CLIP mounting plate without tools. The door can therefore be installed, removed and refitted easily while the mounting plate remains attached to the cabinet.

Key features

• Genuine Blum CLIP top concealed cabinet hinge
• Blum part number: 70T9550.TL
• Hart Wholesale stock code: HI70T95
• Designed for thick and profiled cabinet doors
• Full-overlay door application
• 95° opening angle
• Unsprung, free-moving hinge action
• Suitable for handleless TIP-ON applications
• Screw-on hinge-cup fixing
• Nickel-plated finish
• Tool-free CLIP connection to the mounting plate
• Three-dimensional front adjustment
• Suitable for front thicknesses up to 32mm, subject to installation geometry
• Supplied as one hinge

Adjustment

• Height adjustment: up to ±3mm, depending on the mounting plate
• Side adjustment: up to ±2mm
• Depth adjustment: +3mm to −2mm using the spiral adjustment screw

Important ordering information

This listing is for one hinge only. A compatible Blum CLIP mounting plate must be selected and ordered separately. A suitable Blum TIP-ON unit will also be required for push-to-open operation.

The required door gap depends on the front thickness, edge radius, drilling distance and mounting plate position. A trial installation is recommended for unusually thick or heavily moulded fronts.

Browse our complete Blum CLIP top hinge range, compatible Blum CLIP mounting plates and genuine Blum cabinet fittings.

Frequently asked questions

What type of door is the Blum 70T9550.TL designed for?

It is designed for full-overlay thick doors and cabinet fronts with profiled, moulded or shaped edges.

Is this an aluminium-frame hinge?

No. The 70T9550.TL is a profile and thick-door hinge. Blum uses different hinge references for narrow aluminium-frame doors.

Why is this hinge unsprung?

The unsprung mechanism allows the cabinet door to move freely without being pulled closed. This makes it suitable for a compatible TIP-ON push-to-open system.

Does this hinge include BLUMOTION soft-close?

No. The 70T9550.TL is unsprung and does not contain integrated BLUMOTION. Select the 71B9550 version when integrated soft-close is required.

Can it be used with Blum TIP-ON?

Yes. Its unsprung action is intended for handleless applications using a correctly selected Blum TIP-ON for doors unit.

What is the maximum door thickness?

Blum’s planning information covers front thicknesses up to 32mm. Suitability depends on the drilling distance, door-edge radius and required cabinet gap.

Does the hinge use a screw-on fixing?

Yes. The hinge cup is secured to the back of the cabinet door with screws. The hinge arm then clips onto the separate cabinet mounting plate without tools.

Is the mounting plate included?

No. This product is supplied as one hinge only. A compatible Blum CLIP mounting plate must be ordered separately.

What is the difference between 70T9550.TL, 71T9550 and 71B9550?

The 70T9550.TL is unsprung for push-to-open applications. The 71T9550 is sprung without integrated soft-close, while the 71B9550 includes integrated BLUMOTION.