Blum 174H7130I CLIP top 3 mm cruciform INSERTA mounting plate

The Blum 174H7130I is a cruciform cabinet-side mounting plate for CLIP top hinges. It uses an INSERTA boss for tool-free press-in fixing and provides fine adjustment for accurate door alignment.

Technical details

• Blum part number: 174H7130I
• Type: cruciform CLIP top mounting plate
• Nominal plate spacing: 3 mm
• Physical plate height: 8.5 mm
• Adjustment: ±2 mm fine adjustment
• Fixing: INSERTA tool-free press-in boss
• Material: steel
• Finish: nickel plated
• Quantity: one mounting plate

Choosing and fitting the plate

The 3 mm figure is the nominal planning spacing used with the hinge and cabinet construction. It is not the physical height of the plate, which is 8.5 mm. Use the complete Blum planning dimensions to confirm the required overlay, gap and adjustment.

INSERTA fixing differs from knock-in, screw-on, cam, system-screw, chipboard-screw and EXPANDO methods. Confirm the cabinet preparation and the hinge compatibility before ordering. The hinge is purchased separately.

Compare the Blum CLIP top hinge range and the Blum CLIP top mounting plate range when planning the complete installation.

Frequently Asked Questions

Is this a 3 mm or an 8.5 mm plate?

Both measurements describe different things. The nominal plate spacing is 3 mm, while the physical plate height is 8.5 mm.

How is the plate fitted?

The INSERTA boss is pressed into the prepared cabinet holes without a separate screw-fixing step. Follow the appropriate Blum drilling and installation instructions for the cabinet material.

What adjustment does the plate provide?

The plate provides ±2 mm fine adjustment for positioning the door.

Is the hinge included?

No. One mounting plate is supplied; select a compatible Blum CLIP top hinge separately.