Toggler ALLIGATOR AF5 Flanged 5mm Wall Anchor

The Toggler ALLIGATOR AF5 is a compact flanged wall anchor designed for use in suitable solid materials and compatible hollow-wall constructions. Its polypropylene body expands and conforms inside the hole as the screw is installed, while the flange helps prevent the anchor from passing through the wall surface.

The AF5 requires an installation hole of approximately 5mm. It is approximately 25mm long with an approximately 11mm flange diameter.

Key benefits

• Flanged design: helps retain the anchor at the wall surface and distinguishes AF5 from the unflanged A5.
• Versatile fixing: designed for suitable solid materials and compatible hollow-wall constructions.
• Compact size: approximately 5mm in diameter and 25mm long.
• Polypropylene construction: the anchor body does not corrode.
• Anti-rotation features: help resist spinning while the screw is driven.
• Reusable fixing point: a suitable screw can normally be removed and reinserted if the anchor and substrate remain sound.

Typical applications

• Concrete, brick, stone and masonry
• Hollow brick and compatible blockwork
• Suitable plasterboard and tiled plasterboard installations
• Wall-mounted accessories and lightweight fittings
• General maintenance and installation work

Always match the anchor and screw to the substrate and intended load. Safe loading depends on the wall material, wall thickness, hole quality, screw size, embedment depth, fixing spacing and fixture.

Technical specifications

Installation guidance

1. Confirm that the wall material and thickness are suitable.
2. Check for concealed pipes and electrical cables.
3. Use a suitable drill bit of approximately 5mm for the wall material.
4. Drill a straight hole to a minimum depth of approximately 38mm.
5. Remove loose dust from the hole.
6. Insert the AF5 until its flange sits against the wall surface.
7. Position the fixture and install a compatible fully threaded screw.
8. Tighten until secure without overtightening or damaging the anchor or substrate.

For hollow-wall use, check that the wall thickness and screw engagement comply with the manufacturer’s requirements. Only the threaded section of the screw should engage within the anchor.

Frequently asked questions

What is the difference between AF5 and A5?

The AF5 has a flange that helps retain the anchor at the wall surface. The A5 is the unflanged version intended for suitable push-through installation.

What size drill bit is required?

Use a drill bit of approximately 5mm that is suitable for the wall material.

Can the AF5 be used in solid walls?

Yes. It is designed for suitable solid materials including concrete, brick, stone and masonry, subject to correct installation.

Can it be used in hollow walls?

The flanged AF5 can be used in compatible hollow-wall constructions where the wall thickness, substrate condition, screw and intended load are suitable.

What screw size should be used?

The manufacturer specifies a #4–#9 screw range. Use a fully threaded screw appropriate for the substrate, fixture and required embedment.

Is a screw included?

The current product record does not confirm that a screw is included. Check the packaging for the exact pack contents; if no screw is supplied, a compatible screw is required separately.

How much weight can the AF5 support?

The safe working load depends on the substrate, screw, embedment, installation quality, fixing spacing and fixture. Consult verified technical data for the exact installation.

What is the Hart Wholesale stock code?

The Hart Wholesale stock code is SFT002E.

Related wall fixings

• Shop Plugs & Dowels
• Toggler ALLIGATOR A5 unflanged wall anchor
• Toggler TB hollow-wall anchor