Toggler SnapSkru SP Self-Drilling Plasterboard Anchors with Screws

The Toggler SnapSkru SP is a self-drilling anchor designed for secure fixing into suitable plasterboard and drywall. This version is supplied with compatible screws, providing the fixing components required for suitable wall-mounted applications.

The anchor is driven directly into compatible plasterboard and locks into position as the screw is installed. Its positive locking action helps provide a secure fixing while reducing the risk of the anchor spinning during installation.

Key benefits

• Self-drilling installation: designed to cut into suitable plasterboard without a separate pilot hole under normal installation conditions.
• Screws included: supplied with compatible screws. The current record confirms a 50-piece selling quantity but does not separately state the screw count.
• Positive locking action: the anchor locks into the board as the screw is installed.
• Simple fitting: installs using ordinary hand or powered driving tools with appropriate speed and torque control.
• Removable screw: the screw can be removed when the fixture needs to be taken down.
• Useful for routine installation: suitable for compatible lightweight fixtures and accessories.

Typical applications

• Suitable wall-mounted accessories
• Small brackets and fittings
• Pictures and decorative items
• Electrical accessories where appropriate
• General maintenance and installation work

Suitability and safe loading depend on the plasterboard thickness and condition, fixing spacing, fixture design, installation quality and loading direction. Do not publish a universal load rating without verified data for the exact installation.

Product specifications

Related Toggler fixings

Compare the SnapSkru SP Pack 100 or the SnapSkru Mini.

Installation guidance

1. Confirm that the wall is suitable plasterboard or drywall and is in sound condition.
2. Check for concealed pipes and electrical cables.
3. Mark the required fixing position.
4. Place the SnapSkru SP point against the board and drive it squarely into the surface.
5. Stop when the anchor flange sits flush with the plasterboard. Do not overtighten.
6. Position the fixture and insert the supplied screw through it into the anchor.
7. Tighten until the fixture is secure without crushing the board or stripping the anchor.

Use controlled driving speed and torque. If the manufacturer requires a pilot hole for a particular board type or installation condition, follow that instruction.

Frequently asked questions

What is the Toggler SnapSkru SP used for?

It is a self-drilling anchor for mounting suitable fixtures and accessories to compatible plasterboard or drywall.

Are screws included?

Yes. This SP-with-screw version includes compatible screws. The current product record confirms a 50-piece selling quantity, but does not separately state the number of screws.

Is a pilot hole required?

The SnapSkru SP is designed for self-drilling installation into suitable plasterboard under normal conditions. Follow the manufacturer’s instructions for the particular board and application.

Can it be used in brick or concrete?

No. This product is intended for compatible plasterboard and drywall. Choose a fixing specifically designed for masonry, brick or concrete when working with those materials.

Can the screw be removed?

Yes. The screw can be removed when the fixture needs to be taken down. Inspect the anchor and wall before reusing the fixing point.

How much weight can each fixing support?

The safe working load depends on the board, installation, fixing spacing, fixture and loading direction. Use only a verified manufacturer value for the exact installation.

What is the Hart Wholesale stock code?

The Hart Wholesale stock code is SFT003B.