Toggler SNAPTOGGLE BM6 Hollow-Wall Anchors – Box of 50

The Toggler SNAPTOGGLE BM6 is a heavy-duty hollow-wall anchor with an M6 metric thread and a zinc-plated steel channel. It is designed to create a secure metal-to-metal fixing point in suitable cavity-wall materials while allowing the fixture bolt to be removed without losing the anchor behind the wall.

This trade box contains 50 BM6 anchors. The BM6 requires a 13mm installation hole, accommodates a 10–92mm grip range and requires at least 48mm clearance behind the wall.

Key benefits

• Secure metal channel: the steel channel sits behind the wall to spread the fixing force.
• M6 threaded fixing: provides a reusable metal-to-metal connection for a compatible M6 bolt.
• Removable fixture: the bolt can be removed while the correctly installed anchor remains in position.
• Anti-rotation installation: the channel is held against the rear of the wall while the fixing is tightened.
• Wide grip range: suitable for compatible wall and fixture build-ups between 10mm and 92mm.
• Trade quantity: supplied as a box of 50 anchors for regular installation work.

Typical applications

• Suitable hollow and cavity-wall installations
• Plasterboard and drywall applications where permitted by the manufacturer
• Wall-mounted cabinets and shelving
• Brackets, rails and suitable fixtures
• Commercial installation and maintenance work

The safe load depends on the wall material, wall thickness, condition of the substrate, spacing between fixings, fixture design and loading direction. The installer must determine suitability for the application and follow the manufacturer’s technical guidance.

Technical specifications

Related Toggler fixings

Compare the stainless-steel BM6S version, the standard BM8 SNAPTOGGLE or the Toggler Hollow Wall Anchor with Screw.

Installation guidance

1. Confirm that the wall material, wall thickness and cavity depth are suitable.
2. Check for concealed pipes and electrical cables before drilling.
3. Drill a clean 13mm hole.
4. Pass the metal channel through the hole.
5. Pull the straps towards the front so the channel sits flat against the rear of the wall.
6. Slide the plastic cap along the straps until it sits flush against the wall surface.
7. Move the straps from side to side to snap them off level with the cap.
8. Position the fixture and install a compatible M6 bolt.
9. Tighten the bolt securely without crushing or damaging the wall material.

The minimum bolt length depends on the wall thickness and the thickness of the item being fixed. Do not state a universal bolt length unless the supplied bolt specification is confirmed.

Frequently asked questions

What thread size does the BM6 accept?

The Toggler SNAPTOGGLE BM6 uses an M6 × 1.0 metric thread.

What size hole is required?

The BM6 requires a 13mm installation hole.

What wall thickness can it accommodate?

The verified grip range is 10–92mm. At least 48mm of clear space is required behind the wall for installation.

Can the fixture be removed after installation?

Yes. The compatible bolt can be removed while the properly installed anchor remains positioned behind the wall, allowing the fixture to be removed and refitted.

Are M6 bolts included?

The current product record does not confirm that bolts are included. Describe this product as a box of 50 BM6 anchors and source compatible M6 bolts separately unless the packaging confirms otherwise.

How much weight can each anchor support?

The safe working load depends on the substrate, wall thickness, anchor spacing, fixture and loading direction. Consult verified technical data for the exact installation rather than relying on a single universal figure.

Is this the stainless-steel version?

No. This listing is for the standard BM6 with a zinc-plated steel channel. The stainless model is identified separately as BM6S.