Sycamore Wood Veneer Edging Tape – 25 mm x 100 m

Finish exposed furniture-panel edges with sycamore wood veneer edging supplied as a 25 mm wide strip in a 100 m roll. Also known as wood veneer edge banding, this format provides a timber surface along suitable cabinet, shelf and furniture-component edges.

Choose sycamore edging when coordinating exposed edges with a sycamore-faced panel or an existing timber surface. Compare the actual veneer with the adjoining material where appearance matters, as natural wood varies in shade and grain.

Before fitting, check the backing specification and the recommended bonding method for this exact product.

Product Specifications

• Stock code: VEN038A
• Wood species: Sycamore
• Product format: Wood veneer edging roll
• Strip width: 25 mm
• Roll length: 100 m

Choosing the Correct Edging Width

Measure the exposed edge before ordering. The 25 mm dimension describes the width of the veneer strip, rather than a guaranteed fit for a particular panel thickness.

Select enough width to cover the complete edge and allow suitable clearance for controlled trimming. Choose a wider edging product if 25 mm cannot provide the required coverage.

Planning Your Edging Quantity

Measure the combined length of the edges to be finished. Include an allowance for cuts, trimming, joints and waste when comparing your requirements with the 100 m roll length.

Plan the position and grain direction of visible sections before application, particularly where adjoining edges need a coordinated appearance.

Preparation and Application

Check the recommended application method for the selected veneer and its backing. Prepare a clean, dry, smooth and stable receiving edge, then follow the relevant veneer and adhesive instructions.

Test the complete process on an offcut before fitting the finished component. Allow the bond to set before trimming and check compatibility before applying any finishing product.

Frequently Asked Questions

What size is this sycamore veneer edging roll?

The strip is 25 mm wide and supplied in a 100 m roll.

What is veneer edge banding used for?

It covers exposed furniture-panel edges with a veneer surface. Suitability depends on the veneer, receiving material and bonding method.

Does 25 mm edging fit a 25 mm thick board?

Not necessarily. The strip must cover the complete edge and allow appropriate trimming clearance. Measure the actual component before selecting the edging width.

Will it match my existing sycamore panel?

Natural wood varies in shade and grain. Compare a sample with the panel face or existing furniture where a close match is required.

How much edging should I order?

Add the lengths of all edges to be covered, then include an allowance for cutting, trimming and waste. Compare that total with the listed 100 m roll length.

Related Veneers and Edgings

Browse our browse veneers and edgings guide, or see the full range of wood veneer edging rolls.

Looking for a wider option? See Sycamore veneer edging – 50 mm x 100 m.