Teak Wood Veneer Edging Tape – 20 mm x 100 m

Finish exposed furniture-panel edges with teak wood veneer edging supplied as a 20 mm wide strip in a 100 m roll. Also called wood veneer edge banding, this format provides a timber surface along suitable cabinet, shelf and furniture-component edges.

Use teak veneer edging to coordinate exposed edges with teak-faced panels or existing furniture. Compare the actual veneer with adjoining surfaces where matching matters, as natural wood varies in shade and grain.

Check the backing specification and recommended bonding method for this exact roll before fitting.

Product Specifications

• Stock code: VEN039A
• Wood species: Teak
• Product format: Wood veneer edging roll
• Strip width: 20 mm
• Roll length: 100 m

Choosing the Correct Edging Width

Measure the complete edge to be covered. The 20 mm dimension describes the veneer strip width, rather than a guaranteed fit for a particular board thickness.

Allow sufficient coverage and suitable trimming clearance. Select a wider edging product if 20 mm cannot cover the component properly.

Planning Your Edging Quantity

Add the lengths of all edges being finished, then allow for cuts, trimming, joints and waste. Compare that total with the listed 100 m roll length.

Plan visible sections before fitting, particularly where adjoining edges need a coordinated appearance.

Preparation and Application

Follow the confirmed fitting instructions for the veneer and its backing. Prepare a clean, dry, smooth and stable receiving edge, and check compatibility with the substrate and bonding method.

Test the process on an offcut before completing the finished component. Allow the bond to set before trimming. Check compatibility before applying any finishing product.

Do not assume that a product described as teak edging is suitable for exterior or marine use.

Frequently Asked Questions

What size is this teak veneer edging roll?

The veneer strip is 20 mm wide and supplied in a 100 m roll.

What can teak veneer edging be used for?

It can cover exposed furniture-panel edges where the veneer, substrate and bonding method are suitable.

How do I choose the correct edging width?

Measure the actual edge and allow suitable trimming clearance. The tape width should cover the full edge; it is not a stated board-thickness rating.

Will it match my existing teak furniture?

Natural wood varies in shade and grain. Compare a sample with the existing surface where a close match is important.

How much edging should I order?

Measure the combined length of the edges to be covered and include an allowance for cutting, trimming and waste. Compare your requirement with this 100 m roll.

Related Teak Veneer Edging

See Teak veneer edging – 25 mm x 100 m or Teak veneer edging – 50 mm x 100 m.

Browse our browse veneers and edgings guide, or see the full range of wood veneer edging rolls.