Wide Teak Wood Veneer Edging Tape – 50 mm x 100 m

Cover exposed furniture-panel edges with teak wood veneer edging supplied as a 50 mm wide strip in a 100 m roll. Also called wood veneer edge banding, this format provides a timber surface along suitable cabinet, shelf and furniture-component edges.

The 50 mm strip offers greater coverage than the 20 mm and 25 mm teak edging alternatives in this range. Choose it where the measured edge requires additional width, allowing appropriate clearance for trimming.

Compare the actual veneer with adjoining teak-faced panels or existing furniture where matching matters. Natural wood varies in shade and grain.

Product Specifications

• Stock code: VEN039C
• Wood species: Teak
• Product format: Wood veneer edging roll
• Strip width: 50 mm
• Roll length: 100 m

Choosing Wide Veneer Edging

Measure the complete edge before ordering. The 50 mm dimension describes the width of the veneer strip, rather than a guaranteed fit for a particular board thickness.

Allow enough material to cover the edge and provide suitable trimming clearance. Compare narrower alternatives where a 50 mm strip would create unnecessary trimming waste.

Select the application method from the confirmed specification for this exact product, rather than assuming that every width in the range has identical backing.

Planning Your Edging Quantity

Measure the combined length of all edges being finished, then include an allowance for cuts, trimming, joints and waste. Compare that requirement with this 100 m roll.

Plan visible sections before fitting, particularly where adjoining edges need a coordinated appearance.

Preparation and Application

Check the backing specification and follow the confirmed fitting instructions for this veneer roll. Prepare a clean, dry, smooth and stable receiving edge.

Use a bonding method compatible with the veneer, backing and substrate. Test the complete fitting process on an offcut before working on the finished component.

Allow the bond to set before trimming. Check compatibility before applying any finishing product.

Frequently Asked Questions

What size is this teak veneer edging roll?

The veneer strip is 50 mm wide and supplied in a 100 m roll.

Why choose 50 mm wide veneer edging?

It provides greater strip width than the 20 mm and 25 mm alternatives. Choose it when the measured edge requires that coverage and suitable trimming clearance.

Does 50 mm edging fit a 50 mm thick board?

Not necessarily. The strip must cover the complete edge and allow appropriate trimming clearance. Measure the actual component before selecting the width.

Will it match my existing teak furniture?

Natural wood varies in shade and grain. Compare a sample with the existing surface where a close match is important.

How much edging should I order?

Add the lengths of all edges being covered, then allow for cutting, trimming and waste. Compare your total requirement with the listed 100 m roll length.

Related Teak Veneer Edging

See Teak veneer edging – 20 mm x 100 m or Teak veneer edging – 25 mm x 100 m.

Browse our browse veneers and edgings guide, or see the full range of wood veneer edging rolls.