Reconstituted Wenge Veneer Edging Tape – 22 mm x 100 m

Finish exposed furniture-panel edges with reconstituted wenge veneer edging supplied as a 22 mm wide strip in a 100 m roll. Also described as veneer edge banding, this format provides a decorative veneer surface along suitable cabinet, shelf and furniture-component edges.

This product is listed as reconstituted wenge. Compare its actual colour and grain appearance with the adjoining panel or furniture surface before fitting, particularly where a close match is important.

Check the backing specification and recommended bonding method for this exact roll before application.

Product Specifications

• Stock code: VEN040A
• Listed veneer type: Reconstituted wenge
• Product format: Veneer edging roll
• Strip width: 22 mm
• Roll length: 100 m

Choosing the Correct Edging Width

Measure the complete edge to be covered. The 22 mm dimension describes the width of the veneer strip, rather than a guaranteed fit for a particular board thickness.

Allow sufficient coverage and suitable trimming clearance. Compare a wider edging product if the 22 mm strip cannot cover the component properly.

Matching the Veneer Appearance

Compare the edging with the panel face under the lighting in which the finished furniture will be used. Check both the colour and the grain direction when planning visible sections.

A shared “wenge” description does not establish an exact match between different panels and edging products. Check a sample where matching matters.

Quantity and Application Planning

Measure the combined length of all edges being finished, then allow for cuts, trimming, joints and waste. Compare the requirement with this 100 m roll.

Prepare a clean, dry, smooth and stable receiving edge. Follow the confirmed fitting instructions for the veneer and its backing, using a bonding method compatible with the substrate.

Test the complete process on an offcut before fitting the finished component. Allow the bond to set before trimming. Check compatibility before applying any finishing product.

Frequently Asked Questions

What size is this reconstituted wenge edging roll?

The veneer strip is 22 mm wide and supplied in a 100 m roll.

Is this listing for natural wenge veneer?

The product is listed as reconstituted wenge. Check the confirmed material specification if your project requires a particular natural timber species.

How do I choose the correct edging width?

Measure the actual edge and allow suitable trimming clearance. The strip must cover the complete edge; its listed width is not a board-thickness rating.

Will it match my existing wenge panel?

Check a sample against the panel face. Products sharing a wenge description may differ in colour and grain appearance.

How much edging should I order?

Add the lengths of all edges being covered, then include an allowance for cutting, trimming and waste. Compare the total with the listed 100 m roll.

Related Reconstituted Wenge Edging

See Reconstituted wenge veneer edging – 30 mm x 100 m or Reconstituted wenge veneer edging – 50 mm x 50 m.

Browse our browse veneers and edgings guide, or see the full range of veneer edging rolls.