Name: Blum 70T9650.TL CLIP top 95° Dual Half-Overlay Profile Door Unsprung Screw-On Hinge | Onyx Black
Brand: Blum
SKU: HIO70T9650TL
Price: 2.33 GBP
Availability: InStock

PRODUCT DESCRIPTION

Blum 70T9650.TL CLIP top 95° dual half-overlay profile-door unsprung screw-on hinge – Onyx Black

The Blum 70T9650.TL is an unsprung, free-swing CLIP top hinge for dual or half-overlay cabinet doors with thick or decorative profiles. Half-overlay applications are commonly used where two doors share a central cabinet partition, with each door covering part of the partition edge.

Its specialist 95° geometry provides clearance for profile and thick doors. The hinge has no closing spring and is designed for correctly planned handleless doors using a separate Blum TIP-ON push-to-open unit. The Onyx Black finish suits dark cabinet interiors and contemporary furniture.

Technical details

Blum part number: 70T9650.TL
Hart Wholesale SKU: HIO70T9650TL
Type: CLIP top concealed profile-door hinge
Application: dual/half overlay
Door type: profile and thick doors
Opening angle: 95°
Closing mechanism: unsprung/free swing
BLUMOTION: no
Recommended opening system: compatible Blum TIP-ON for doors
Hinge-cup fixing: screw-on
Hinge-cup diameter: 35 mm
Approximate cup depth: 12.7 mm
Hinge-arm application: dual/half overlay
Door thickness: approximately 16–32 mm when correctly planned
Adjustment: three-dimensional with a suitable mounting plate, including spiral-screw depth adjustment
Material: steel
Finish: Onyx Black
Quantity: one hinge

Planning and fitting

Confirm the half-overlay arm, 95° opening angle, unsprung mechanism, screw-on cup and Onyx Black finish before ordering. Door thicknesses from approximately 16 to 32 mm may be possible, but suitability depends on the profile, corner radius, drilling distance, required gap and mounting-plate height.

The 35 mm hinge cup is secured to the door using screws. This screw-on cup fixing does not describe the separate mounting plate, which connects to the hinge arm through the tool-free CLIP mechanism.

A compatible Blum CLIP mounting plate and TIP-ON door unit are supplied separately. Select both components according to the cabinet construction, door dimensions and required overlay. A trial installation is recommended for thicker or deeply profiled doors.

For the nickel counterpart, see the verified Blum 70T9650.TL half-overlay profile-door hinge. Browse the Blum CLIP top hinge range for compatible components.

Matching components

Use matching unsprung hinges throughout a TIP-ON door. Do not mix this hinge with sprung or soft-closing hinges on the same door because conflicting closing mechanisms can prevent push-to-open operation.

Frequently Asked Questions

What does half overlay mean?

Half overlay is normally used where two doors share a central cabinet partition, with each door covering part of the panel edge.

What type of door is the 70T9650.TL designed for?

It is intended for dual or half-overlay cabinet doors with thick or decoratively profiled fronts.

What does unsprung mean?

The hinge has no closing spring, so the door moves freely rather than being pulled closed.

Is this hinge suitable for TIP-ON?

Yes. Its free-swing action is designed for correctly planned push-to-open applications using a separate Blum TIP-ON unit.

Does it include BLUMOTION soft close?

No. It has no integrated BLUMOTION and should not be described as a soft-close hinge.

What does screw-on mean?

The 35 mm hinge cup is secured to the door using screws. It does not describe the separate mounting plate.

Is the mounting plate included?

No. A compatible Blum CLIP mounting plate must be ordered separately.

Will it fit any 32 mm door?

No. Doors up to approximately 32 mm may be possible, but the profile, corner radius, drilling position, required gap and mounting plate must be checked.