Blum 174L6100.05 CLIP top 0 mm cruciform knock-in mounting plate

The Blum 174L6100.05 is a cruciform cabinet-side mounting plate for CLIP top hinges. It uses pre-fixed dowels for knock-in assembly and is selected using the hinge, cabinet drilling and required door position.

Technical details

• Blum part number: 174L6100.05
• Type: cruciform CLIP top mounting plate
• Nominal plate spacing: 0 mm
• Physical plate height: 8.5 mm
• Height adjustment: ±3 mm
• Mounting pattern: 37/32
• Fixing: knock-in assembly with pre-fixed dowels
• Material: steel
• Finish: nickel plated
• Quantity: one mounting plate

Choosing and fitting the plate

The 0 mm figure is the nominal planning spacing used with the hinge and cabinet construction. It is not the physical height of the plate, which is 8.5 mm. Use the complete Blum planning dimensions to confirm the required overlay, gap and adjustment.

This plate uses pre-fixed knock-in dowels. It differs from screw-on, cam, system-screw, chipboard-screw and EXPANDO fixing methods, so confirm the cabinet preparation before ordering.

The hinge is purchased separately. Compare the Blum CLIP top hinge range and the Blum CLIP top mounting plate range when planning the complete installation.

Frequently Asked Questions

Is this a 0 mm or an 8.5 mm plate?

Both measurements describe different things. The nominal plate spacing is 0 mm, while the physical plate height is 8.5 mm.

How is the plate fitted?

The plate has pre-fixed dowels for knock-in assembly. Follow the appropriate Blum drilling and installation instructions for the cabinet material.

What adjustment does the plate provide?

The plate provides ±3 mm height adjustment for positioning the door.

Is the hinge included?

No. One mounting plate is supplied; select a compatible Blum CLIP top hinge separately.