Improve push-to-open response across a drawer front with this round TIP-ON BLUMOTION synchronisation connecting bar. Designed for compatible MOVENTO and LEGRABOX applications, the bar links the left and right operating units so they can respond together when the drawer front is pressed.

The synchronisation bar is supplied for cutting to the required cabinet width and connects to the two synchronisation adapters included with compatible TIP-ON BLUMOTION operating sets. It is particularly useful on wider drawer fronts, where synchronisation enlarges the trigger area and supports more consistent opening.

Synchronised push-to-open operation

Without synchronisation, the push-to-open action may be more dependent on where the drawer front is pressed. Linking the left and right units allows a press across a wider area of the front to activate the opening mechanism.

This accessory does not create push-to-open operation by itself. It must be combined with the correct TIP-ON BLUMOTION operating set, compatible MOVENTO or LEGRABOX runners and the appropriate synchronisation adapters.

Cut to suit the cabinet width

Measure the clear internal cabinet width carefully and use the correct cutting calculation for the installed drawer system:

• LEGRABOX applications: Cut the bar to the internal cabinet width minus 247mm.
• MOVENTO applications: Cut the bar to the internal cabinet width minus 267mm.

Always confirm the measurement against the current installation instructions before cutting. Measure twice because a bar that has been cut too short cannot be extended.

Compatibility

• Product type: TIP-ON BLUMOTION synchronisation connecting bar
• Profile: Round
• Colour: Grey
• Installation: Cut to size
• LEGRABOX cabinet width: For compatible applications with an internal width of at least 294mm
• MOVENTO cabinet width: For compatible applications with an internal width of at least 314mm
• Maximum supported internal cabinet width: Up to 1372mm
• Required adapters: Two compatible synchronisation adapters

For narrower drawers, a different one-piece synchronisation component may be required. Check the drawer system and clear internal cabinet width before ordering.

What is included?

• One round grey cut-to-size synchronisation connecting bar

Not included: TIP-ON BLUMOTION operating units, latches, synchronisation adapters and drawer runners. Compatible operating sets include the required pair of adapters, but the connecting bar is supplied separately.

Compatible operating sets

Choose the operating set according to runner length, cabinet profile and total pull-out weight:

• S0: TIP-ON BLUMOTION S0 set — 270–300mm runners and total pull-out weight up to 10kg
• S1: TIP-ON BLUMOTION S1 set — 270–300mm runners and total pull-out weight above 10kg up to 20kg
• L1: TIP-ON BLUMOTION L1 set — 350–600mm runners and total pull-out weight up to 20kg
• L3: TIP-ON BLUMOTION L3 set — 350–600mm runners and total pull-out weight of 15–40kg
• L5: TIP-ON BLUMOTION L5 set — 450–650mm runners and total pull-out weight of 35–70kg

Frequently asked questions

What does the synchronisation bar do?

It links the left and right TIP-ON BLUMOTION units, enlarging the trigger area and helping the drawer respond consistently when different areas of the front are pressed.

Does this bar create push-to-open operation by itself?

No. It must be combined with a compatible TIP-ON BLUMOTION operating set and suitable MOVENTO or LEGRABOX drawer runners.

Are synchronisation adapters included?

No. This product is the connecting bar only. Two compatible adapters are normally supplied with the matching operating set.

Does the bar need to be cut?

Yes. It must be measured and cut to suit the clear internal cabinet width and the installed drawer system.

What cutting calculation should be used?

For compatible LEGRABOX applications, subtract 247mm from the internal cabinet width. For compatible MOVENTO applications, subtract 267mm. Confirm against the installation instructions before cutting.

Can it be used with any drawer runner?

No. It is a system-specific accessory for compatible TIP-ON BLUMOTION, MOVENTO and LEGRABOX installations.