Easiwood Cherry Flexible Veneer Sheet – 2400 x 1200mm

Create a warm and refined natural-wood finish with this Easiwood Cherry Flexible Veneer Sheet. Measuring 2400mm long by 1200mm wide, it provides extensive coverage for furniture, cabinetry, decorative panels and bespoke interior joinery.

Cherry veneer is valued for its warm pinkish-brown to reddish-brown colouring and smooth, attractive natural grain. Its understated character works well with traditional furniture, contemporary cabinetry, fitted interiors and feature surfaces.

The natural Cherry veneer is supported by a flexible backing that makes the sheet easier to handle and apply than unsupported traditional veneer. It can be used on flat panels and suitable curved, radiused or shaped interior components.

This sheet is not described as self-adhesive or pre-glued. It must be bonded using a suitable veneer adhesive and application method selected for the veneer, substrate and intended interior environment.

Key Features

• Genuine natural Cherry veneer surface
• Warm pinkish-brown to reddish-brown colouring
• Smooth and attractive natural grain
• Flexible-backed construction
• Large 2400 x 1200mm sheet size
• Suitable for flat and appropriately curved interior surfaces
• Can be bonded to properly prepared MDF, plywood and chipboard
• Suitable for furniture, cabinetry and interior joinery
• Can be carefully trimmed and finished after bonding
• Supplied as one sheet

Typical Applications

• Kitchen and bedroom cabinetry
• Wardrobes and fitted interiors
• Furniture panels and cabinet doors
• Traditional and contemporary furniture
• Curved reception counters
• Radiused and shaped interior components
• Decorative wall and feature panels
• Retail displays and shopfitting
• Furniture restoration and refurbishment
• Bespoke interior joinery

Product Specifications

Working with Flexible Cherry Veneer

The flexible backing helps the veneer conform more easily to suitable curves and shaped components. The achievable bend depends on the grain direction, radius, substrate and application method. Do not force the sheet around a radius that causes the wood surface to split or distort.

Plan the grain direction and colour arrangement before cutting. When separate pieces will be positioned together, lay them out beforehand to achieve the most suitable visual flow between the components.

Surface Preparation and Bonding

The receiving surface must be clean, dry, flat, stable and free from dust, grease and loose material. Select an adhesive that is compatible with genuine wood veneer and the chosen substrate.

Apply the adhesive according to its manufacturer’s instructions, including coverage, open time, pressure and curing requirements. Apply even pressure across the complete sheet to reduce the possibility of bubbles, movement or weak areas.

Create a test piece using the intended veneer, substrate, adhesive and pressing method before beginning the finished component. Allow the bond to cure fully before trimming or finishing.

Trimming and Finishing

Once securely bonded, trim the veneer using a sharp, suitable tool while paying attention to the grain direction. Avoid aggressive sanding because decorative veneer is considerably thinner than solid timber.

The natural Cherry surface can be finished with a compatible lacquer, oil, wax or clear interior timber finish. Always test the finishing system on an offcut first because coatings commonly deepen the colour and emphasise the grain.

Cherry can naturally develop a deeper and warmer appearance with exposure to light and as the finished surface ages. Position adjoining pieces together before bonding where colour coordination is important.

Cherry is a genuine natural material. Colour, grain and natural markings will vary between sheets. These differences are part of the character of real wood.

Frequently Asked Questions

Is this genuine Cherry veneer?

Yes. The visible surface is genuine natural Cherry veneer rather than a printed or imitation wood-effect material.

What size is the sheet?

The sheet measures 2400mm long by 1200mm wide and is supplied as one sheet.

Is the sheet pre-glued?

No pre-applied adhesive is specified for this product. Use a suitable veneer adhesive selected for the substrate, application method and intended interior environment.

Can it be applied to MDF?

Yes. It can be bonded to correctly prepared MDF, plywood, chipboard and other stable woodworking substrates using an appropriate veneer adhesive.

Can it be used on curved surfaces?

The flexible backing makes it more suitable for curves and radiused components than many unsupported veneers. The achievable radius depends on the grain direction, substrate and installation method, so test the proposed curve first.

What colour is Cherry veneer?

Cherry commonly displays warm pinkish-brown to reddish-brown colouring with a smooth natural grain. Its appearance may deepen following finishing and exposure to light.

Can Cherry veneer be lacquered or oiled?

Yes. The natural surface can accept compatible clear lacquers, oils, waxes and other suitable interior timber finishes. Test the complete finishing system on an offcut first.

Will every sheet look identical?

No. Genuine Cherry varies naturally in colour, grain and markings. Check the appearance and orientation before cutting when several pieces will be used together.

Is this suitable for exterior use?

This listing is intended for interior furniture, cabinetry and joinery. Do not use it for exterior or continuously damp applications without verified confirmation that the complete veneer, adhesive, substrate and finishing system are suitable.

Related Veneer Products

Browse our real wood veneer sheets and wood veneer edging for alternative timber species, sizes and formats.