Collection: Cabinet Shelf Supports

Cabinet Shelf Supports

HOMEPAGE > CATEGORY > Cabinet Shelf Supports

Cabinet shelf supports, shelf pins and pegs

Find shelf fittings for cupboards, cabinets and furniture at Hart Wholesale. Compare cabinet shelf supports, shelf pins, pegs, sleeves and sockets, then match the fitting to your cabinet drilling and shelf material. For replacement parts, check the original fitting’s dimensions and fixing method before ordering.

For shelves fixed directly to a wall, browse our separate wall shelf brackets collection.

How to choose cabinet shelf supports

Start by identifying how the existing shelf is supported. A push-in pin, a screw-fixed fitting and a support used with a separate socket require different preparation. The replacement must suit the cabinet construction and provide the correct contact with the shelf.

  • Fixing dimensions: measure the cabinet hole and the diameter and insertion length of the original fitting.
  • Shelf material: establish whether the shelf is timber, furniture board or glass, and measure its thickness.
  • Support shape: compare the surface beneath the shelf and any retaining or locking features.
  • Matching components: check whether sleeves, sockets, rings or buffers are required and whether they are supplied separately.
  • Ordering quantity: check whether the listing is for one fitting or a pack.

For a pin-style fitting, compare the measurements carefully. For example, our transparent 5 mm shelf support pins should only be selected where their dimensions and application match the cabinet.

Choose the finish after confirming the fitting’s dimensions and suitability. A matching colour does not establish that two supports are interchangeable. For glass shelves, use a fitting specifically stated to suit glass and check any required protective pads or buffers.

Follow the selected product’s installation instructions and load information. The complete arrangement includes the shelf, cabinet material, fixing method and positioning of the supports; one product’s capacity must not be applied to the whole range.

Cabinet shelf support FAQs

What is the difference between a shelf pin and a shelf peg?

These terms are often used for small fittings that support shelves inside cupboards and cabinets. The name alone does not establish compatibility. Compare the fixing dimensions, support shape and intended application.

How do I choose a replacement cabinet shelf support?

Measure the original fitting and cabinet hole, then compare the product photographs and dimensions. Check the insertion length, shelf contact and fixing method. Select by measurements and suitability rather than appearance alone.

Are all shelf pins the same size?

No. Pin diameters, lengths and supporting surfaces vary. Measure the existing cabinet drilling and check the selected product’s dimensions before ordering.

When do I need a sleeve or socket?

A sleeve or socket is required where it forms part of the specified support system. Check the product details for compatible components and confirm whether they are included or purchased separately.

Can I use cabinet shelf supports with glass shelves?

Only where the selected fitting is stated to suit glass. Check the permitted glass thickness, mounting method and any protective contact components required for that installation.

How much weight can cabinet shelf supports hold?

Capacity depends on the selected fitting and the complete installation. Follow its stated load rating and conditions. Do not assume that a rating applies to one support, or multiply individual ratings without supporting installation guidance.

Need help identifying a replacement? Contact Hart Wholesale with a clear photograph, measurements and any available stock code.

FILTER

213 products

You've viewed all products