Toggler ALLIGATOR AF8 Flanged 8mm Wall Anchor

The Toggler ALLIGATOR AF8 is a flanged wall anchor designed for use in suitable solid materials and compatible hollow-wall constructions. Its polypropylene body expands and conforms inside the hole as the screw is installed, while the flange helps prevent the anchor from passing through the wall surface.

The AF8 requires an installation hole of approximately 8mm. It is approximately 41mm long with an approximately 14mm flange diameter.

Key benefits

• Flanged design: helps retain the anchor at the wall surface and distinguishes AF8 from the unflanged A8.
• Versatile fixing: designed for suitable solid materials and compatible hollow-wall constructions.
• 8mm fixing diameter: the anchor and required drill diameter are both approximately 8mm.
• Polypropylene construction: the anchor body does not corrode.
• Anti-rotation features: help resist spinning while the screw is driven.
• Reusable fixing point: a suitable screw can normally be removed and reinserted if the anchor and substrate remain sound.

Typical applications

• Concrete, brick, stone and masonry
• Hollow brick and compatible blockwork
• Suitable plasterboard and tiled plasterboard installations
• Wall-mounted accessories, brackets and fittings
• General maintenance and installation work

Always match the anchor and screw to the substrate and intended load. Safe loading depends on the wall material, wall thickness, hole quality, screw size, embedment depth, fixing spacing and fixture.

Technical specifications

Installation guidance

1. Confirm that the wall material and thickness are suitable.
2. Check for concealed pipes and electrical cables.
3. Use a suitable drill bit of approximately 8mm for the wall material.
4. Drill a straight hole to a minimum depth of approximately 57mm.
5. Remove loose drilling dust from the hole.
6. Insert the AF8 until its flange sits against the wall surface.
7. Position the fixture and install a compatible fully threaded screw or lag fixing.
8. Tighten until secure without overtightening or damaging the anchor or substrate.

For hollow-wall use, check that the wall thickness and screw engagement comply with the manufacturer’s requirements. Only the threaded section of the screw should engage within the anchor.

Frequently asked questions

What is the difference between AF8 and A8?

The AF8 has a flange that helps retain the anchor at the wall surface. The A8 is the unflanged version intended for suitable push-through installation.

What size drill bit is required?

Use a drill bit of approximately 8mm that is suitable for the wall material.

Can the AF8 be used in solid walls?

Yes. It is designed for suitable solid materials including concrete, brick, stone and masonry, subject to correct installation.

Can it be used in hollow walls?

The flanged AF8 can be used in compatible hollow-wall constructions where the wall thickness, substrate condition, screw and intended load are suitable.

What screw size should be used?

The manufacturer specifies a #8–#14 screw range. Use a fully threaded screw appropriate for the substrate, fixture and required embedment.

Is a screw included?

The current product record does not confirm that a screw is included. Check the packaging for the exact pack contents; if no screw is supplied, a compatible screw is required separately.

How much weight can the AF8 support?

The safe working load depends on the substrate, screw, embedment, installation quality, fixing spacing and fixture. Consult verified technical data for the exact installation.

What is the Hart Wholesale stock code?

The Hart Wholesale stock code is SFT002G.

Related wall fixings

• Shop Plugs & Dowels
• Toggler ALLIGATOR A8 unflanged wall anchor
• Toggler ALLIGATOR A6 unflanged wall anchor