Toggler SnapSkru SP Self-Drilling Plasterboard Anchors – Pack of 100

The Toggler SnapSkru SP is a self-drilling anchor designed for secure fixing into suitable plasterboard and drywall. This trade pack contains 100 SP anchors for regular installation, maintenance and refurbishment work.

The anchor is driven directly into compatible plasterboard under normal installation conditions. As a suitable screw is installed, the SnapSkru SP locks into the board to create a secure fixing point and help resist rotation.

Key benefits

• Self-drilling installation: designed to cut into suitable plasterboard without a separate pilot hole under normal conditions.
• Positive locking action: locks into the board as the screw is installed.
• Anti-rotation design: helps resist spinning during installation.
• Compatible screw range: accepts suitable screws approximately 3.5–5mm in diameter.
• Removable screw: the screw can be removed when the fixture needs to be taken down.
• Trade pack: supplied as 100 anchors for regular use.

Typical applications

• Wall-mounted accessories
• Pictures and decorative items
• Small brackets and suitable fittings
• Electrical accessories where appropriate
• Maintenance and refurbishment work

Suitability and safe loading depend on the plasterboard type, thickness and condition, fixing spacing, screw engagement, fixture and loading direction. Do not publish a universal load rating without verified technical data for the exact installation.

Product specifications

Installation guidance

1. Confirm that the wall is suitable plasterboard or drywall and is in sound condition.
2. Check for concealed pipes and electrical cables.
3. Mark the required fixing position.
4. Place the SnapSkru SP point against the board and drive it squarely into the surface.
5. Stop when the anchor flange sits flush with the plasterboard. Do not overtighten.
6. Position the fixture and insert a compatible screw approximately 3.5–5mm in diameter.
7. Tighten until the fixture is secure without crushing the board or stripping the anchor.

Use controlled driving speed and torque. If the manufacturer requires a pilot hole for a particular board type or installation condition, follow that instruction.

Frequently asked questions

What is the SnapSkru SP used for?

It is a self-drilling anchor for mounting suitable fixtures and accessories to compatible plasterboard or drywall.

How many anchors are supplied?

This product is supplied as a pack of 100 SnapSkru SP anchors.

What screw size should be used?

Use a compatible screw approximately 3.5–5mm in diameter. Select the screw length to suit the fixture and required engagement.

Are screws included?

This listing contains 100 anchors only. Compatible screws are required separately. A separate SnapSkru SP-with-screw product is available where a supplied screw is needed.

Is a pilot hole required?

The SnapSkru SP is designed for self-drilling installation into suitable plasterboard under normal conditions. Follow the manufacturer’s instructions for the specific board and application.

Can it be used in brick or concrete?

No. The SnapSkru SP is intended for compatible plasterboard and drywall. Use a fixing designed for masonry, brick or concrete for those materials.

Can the screw be removed?

Yes. The screw can be removed when the fixture needs to be taken down. Inspect the anchor and wall before reusing the fixing point.

How much weight can it support?

The safe working load depends on the board, installation, fixing spacing, fixture and loading direction. Use only verified manufacturer data for the exact installation.

Related plasterboard fixings

• Toggler SnapSkru SP Self-Drilling Plasterboard Anchors with Screws
• Toggler SnapSkru Mini Self-Drilling Plasterboard Anchor