Toggler HWA Hollow-Wall Anchors with Screws

These Toggler HWA hollow-wall anchors are supplied with compatible screws for suitable wall-board and cavity-wall installations. Their anti-rotation design helps prevent spinning while the screw is driven, creating a practical fixing point for appropriate wall-mounted fixtures.

This product has Hart Wholesale stock code SFT001D and reference code TOG55100. The current product record identifies the anchor model as HWA and the selling format as one box.

Key benefits

• Compatible screws supplied: provides the anchor and matching screw as one product.
• Anti-rotation design: helps resist spinning while the screw is installed.
• Suitable for hollow-wall applications: intended for compatible wall board and cavity-wall constructions.
• Vibration-resistant fixing action: designed to maintain its fixing action under normal installed conditions.
• Removable screw: the screw can be removed when the fixture needs to be taken down.
• Useful for maintenance work: suitable for compatible accessories, brackets and fittings.

Typical applications

• Compatible plasterboard and drywall
• Suitable hollow-wall panels
• Wall-mounted accessories
• Small brackets, clips and suitable fittings
• Maintenance and refurbishment work

Suitability and safe loading depend on the wall material, panel thickness, substrate condition, screw engagement, fixing spacing, fixture and loading direction. Do not publish a single load rating unless it is verified for this exact product and installation.

Product specifications

Installation guidance

1. Identify the wall material and measure its thickness.
2. Confirm that the supplied HWA anchor is suitable for the wall construction.
3. Check for concealed pipes and electrical cables.
4. Create the manufacturer-specified installation hole of approximately 8mm.
5. Insert the anchor until its flange sits against the wall surface.
6. Position the fixture and insert the supplied compatible screw.
7. Tighten until the fixing is secure without overtightening or damaging the wall board.

The exact drill diameter and screw sizes above are based on the current HWA product record. Do not infer a universal wall-thickness range or load rating for this listing.

Frequently asked questions

Are screws included?

Yes. This listing is for Toggler HWA hollow-wall anchors supplied with compatible screws. The current product record identifies the selling format as one box; confirm the exact anchor and screw counts from the packaging.

Which wall materials are suitable?

The anchors are intended for compatible hollow-wall boards. Verify the precise wall material, thickness and manufacturer guidance before installation.

What size hole is required?

The current HWA product record specifies an installation hole of approximately 8mm.

What screw sizes are compatible?

The current HWA product record specifies compatible 4.0mm and 5.0mm screw sizes. Confirm the supplied screw and required engagement for the fixture.

Can the screw be removed?

Yes. The screw can be removed where the correctly installed anchor and surrounding wall material remain sound. Inspect the fixing before reuse.

Can these anchors be used in solid walls?

The current product record describes the HWA design as suitable for certain solid materials as well as compatible hollow walls. Check the substrate and installation method against verified manufacturer guidance.

How much weight can each anchor support?

The safe working load depends on the anchor model, wall material, panel thickness, installation quality, fixing spacing, fixture and loading direction. Do not rely on an unqualified universal load figure.

What is the Hart Wholesale stock code?

The Hart Wholesale stock code is SFT001D.

Related hollow-wall fixings

• Toggler TA hollow-wall anchor for 3–6mm panels
• Toggler TB hollow-wall anchor for 9–13mm panels
• Toggler TC hollow-wall anchor for 16–20mm panels