Toggler TA Hollow-Wall Anchor for 3–6mm Panels

The Toggler TA is a versatile wall anchor designed for fixing into compatible thin hollow-wall panels approximately 3–6mm thick. Its anti-rotation design helps prevent spinning while the screw is installed, providing a secure fixing point for suitable wall-mounted fixtures.

The TA accepts compatible 4.0mm and 5.0mm screws. It can also function in suitable solid materials where the installation method and manufacturer guidance permit.

Key benefits

• For thin hollow-wall panels: designed for compatible panel thicknesses from approximately 3mm to 6mm.
• Two screw-size options: accepts suitable 4.0mm and 5.0mm screws.
• Anti-rotation design: helps resist spinning as the screw is driven.
• Resists vibration: designed to maintain its fixing action under normal installed conditions.
• Versatile application: suitable for compatible hollow walls and certain solid materials.
• Removable screw: the screw can be removed where the anchor and substrate remain sound.

Typical applications

• Thin hollow-wall panels within the specified thickness range
• Suitable wall boards and sheet materials
• Wall-mounted accessories and lightweight fittings
• Small brackets, clips and electrical accessories
• Maintenance and refurbishment work

Suitability and safe loading depend on the exact wall material, panel thickness, substrate condition, fixing spacing, screw engagement, fixture and loading direction. Do not publish a universal load figure without verified technical information for the exact installation.

Technical specifications

Installation guidance

1. Confirm that the panel material and thickness are suitable for the TA anchor.
2. Check for concealed pipes and electrical cables.
3. Mark the required fixing position.
4. Create the manufacturer-specified installation hole using the correct tool and diameter.
5. Insert the anchor until its flange sits against the wall surface.
6. Position the fixture and insert a compatible 4.0mm or 5.0mm screw.
7. Tighten until the fixing is secure without overtightening or damaging the panel.

Add the exact installation-hole diameter only if it is confirmed for the TA model. Do not copy a drill size from another Toggler anchor.

Frequently asked questions

What panel thickness is the TA anchor designed for?

The TA is designed for compatible hollow-wall panels approximately 3–6mm thick.

What screw sizes can be used?

The TA accepts suitable screws with diameters of 4.0mm or 5.0mm. Choose the screw length to suit the fixture and required engagement.

Can the TA be used in standard plasterboard?

Check the actual board thickness before installation. Standard plasterboard may be thicker than the TA’s 3–6mm panel range, in which case another Toggler model may be more appropriate.

What is the difference between TA and TB?

The TA is intended for compatible panels approximately 3–6mm thick. The TB is designed for a different, thicker panel range. Select the model that matches the measured wall thickness.

Can it be used in solid walls?

The Toggler anchor design can work in certain suitable solid materials, but the substrate and installation method must be checked against verified manufacturer guidance.

Is a screw included?

The current product record does not confirm that a screw is included. Check the packaging for the exact pack contents; if no screw is supplied, a compatible 4.0mm or 5.0mm screw is required separately.

How much weight can the TA support?

The safe working load depends on the panel material, thickness, condition, screw, installation quality, fixing spacing and fixture. Use verified technical data for the exact application.

What is the Hart Wholesale stock code?

The Hart Wholesale stock code is SFT001A.

Related hollow-wall fixings

• Toggler TB hollow-wall anchor for 9–13mm panels
• Toggler TC hollow-wall anchor for 16–20mm panels