Toggler SNAPTOGGLE BM8 M8 Hollow-Wall Anchor

The Toggler SNAPTOGGLE BM8 is a hollow-wall anchor with an M8 metric thread and a zinc-plated steel channel. It creates a secure metal-to-metal fixing point in compatible cavity-wall materials while allowing the fixture bolt to be removed without losing the correctly installed anchor behind the wall.

The BM8 requires a 19mm installation hole, accommodates a 10–64mm grip range and requires at least 48mm clear space behind the wall.

Key benefits

• Solid metal channel: sits behind the wall to spread the fixing force.
• M8 threaded fixing: provides a reusable metal-to-metal connection for a compatible M8 bolt.
• Removable fixture: the bolt can be removed while the correctly installed anchor remains in position.
• Controlled installation: the straps hold the channel against the rear surface while the cap is fitted.
• Defined grip range: accommodates compatible wall and fixture build-ups from 10mm to 64mm.
• Anti-rotation fixing: the channel remains positioned behind the wall while the bolt is tightened.

Typical applications

• Suitable hollow and cavity-wall installations
• Plasterboard and drywall where permitted by the manufacturer
• Wall-mounted brackets, rails and suitable fixtures
• Cabinet and shelving installations
• Commercial maintenance and refurbishment work

The safe working load depends on the wall material, wall thickness, substrate condition, anchor spacing, fixture design and loading direction. Do not publish a universal load figure without verified technical data for the exact installation.

Technical specifications

Installation guidance

1. Confirm that the wall material, wall thickness and cavity depth are suitable.
2. Check for concealed pipes and electrical cables before drilling.
3. Drill a clean 19mm hole.
4. Pass the metal channel through the hole.
5. Pull the straps forward until the channel sits flat against the rear of the wall.
6. Slide the plastic cap along the straps until its flange sits flush against the wall.
7. Move the straps from side to side to snap them off level with the cap.
8. Position the fixture and insert a compatible M8 bolt.
9. Tighten securely without crushing or damaging the wall material.

The required bolt length depends on the wall thickness and the thickness of the item being fixed. Do not publish a universal bolt length unless the supplied bolt specification is confirmed.

Frequently asked questions

What thread size does the BM8 accept?

The Toggler SNAPTOGGLE BM8 uses an M8 × 1.25 metric thread.

What size installation hole is required?

The BM8 requires a 19mm installation hole.

What wall thickness can it accommodate?

The verified grip range is 10–64mm. At least 48mm of clear space is also required behind the wall.

Can the fixture be removed after installation?

Yes. The compatible bolt can be removed while the correctly installed anchor remains behind the wall, allowing the fixture to be removed and refitted.

Is an M8 bolt included?

The current product record does not confirm that an M8 bolt is included. A compatible M8 bolt is required separately unless the packaging confirms otherwise.

How much weight can the BM8 support?

The safe working load depends on the substrate, wall thickness, installation quality, anchor spacing, fixture and loading direction. Consult verified technical information for the exact installation.

Is this the stainless-steel version?

No. This listing is for the standard BM8 with a zinc-plated steel channel. The stainless-channel version is identified separately as BM8S.

Related SNAPTOGGLE fixings

• Toggler SNAPTOGGLE BM8S Stainless Hollow-Wall Anchor
• Toggler SNAPTOGGLE BM6 Hollow-Wall Anchors – Box of 50