Woodleaf Zebrano Pre-Glued Wood Veneer Sheet – 2500 x 255mm

Create a bold and highly decorative natural-wood finish with this Woodleaf Zebrano Pre-Glued Wood Veneer Sheet. Measuring 2500mm long by 255mm wide, it is suitable for covering narrow furniture panels, cabinet components, drawer fronts, plinths, trims and feature sections.

Zebrano is recognised for its distinctive striped appearance, combining a lighter golden or cream background with contrasting dark brown grain lines. This strong natural pattern makes it particularly effective for statement furniture, feature panels, luxury interiors and bespoke joinery.

This HM version has a factory-applied heat-activated adhesive backing. It does not normally require a separate wet adhesive and can be applied using appropriate controlled heating and pressing equipment or a suitable veneer iron.

The 2500mm length is useful for long cabinet and furniture components. The 255mm width provides substantially more coverage than conventional edging tape while remaining easier to handle than a full-size veneer sheet.

Key Features

• Genuine Zebrano wood veneer surface
• Distinctive light and dark striped grain
• Factory-applied heat-activated adhesive backing
• Sheet size: 2500mm long x 255mm wide
• Ideal for decorative furniture and feature components
• Suitable for covering narrow panels and cabinet parts
• Can be applied to properly prepared MDF, plywood and chipboard
• Suitable for furniture, cabinetry and interior joinery
• Can be carefully trimmed after application
• Natural surface can be finished with a compatible wood-finishing product

Typical Applications

• Feature furniture and statement pieces
• Cabinet and cupboard components
• Drawer fronts and decorative furniture panels
• Plinths, trims and narrow feature panels
• Reception and office furniture
• Luxury retail displays and shopfitting
• Hotel, restaurant and commercial interiors
• Furniture manufacture and restoration
• Bespoke architectural joinery
• Repairing or updating suitable veneered surfaces

Product Specifications

Application Guidance

Ensure the receiving surface is clean, dry, flat, smooth and free from dust, grease or loose material. Measure the component and position the veneer carefully before activating the adhesive.

Check the direction and placement of the striped grain before bonding. Zebrano has a particularly strong pattern, so careful alignment is important when separate veneered components will be viewed together.

Apply controlled, even heat and firm pressure progressively across the veneer. Avoid holding the heat source in one position for too long. Work methodically to reduce the possibility of movement, trapped air or uneven bonding.

Allow the adhesive to cool completely before trimming the edges or carrying out further finishing work. Heating time, pressure and temperature can vary according to the equipment and substrate, so test the process on a small or spare section first.

After bonding, carefully trim the veneer while paying attention to the grain direction. The surface can then be lightly prepared for a compatible lacquer, oil or clear timber finish. Always test the chosen finish because it may deepen the colour and increase the contrast between the light and dark grain.

Zebrano is a genuine natural material. Colour, grain direction, stripe width and figuring will vary between sheets. These variations are part of the decorative character of real wood.

Frequently Asked Questions

Is this genuine Zebrano veneer?

Yes. The visible surface is genuine Zebrano wood veneer rather than a printed wood-effect finish. Natural variations in colour and grain should be expected.

What does HM mean?

HM identifies the heat-activated adhesive backing. The adhesive is activated using controlled heat and firm, even pressure during application.

What size is the veneer sheet?

The sheet measures 2500mm long by 255mm wide. Allow sufficient material for positioning and final trimming when planning the project.

Can it be applied to MDF?

It can be applied to suitable MDF, plywood, chipboard and similar stable substrates, provided the surface is clean, dry, flat and correctly prepared.

Do I need to apply a separate adhesive?

No separate wet adhesive is normally required because the sheet has a factory-applied heat-activated backing. Correct heat and pressure are required to activate the bond.

What does Zebrano veneer look like?

Zebrano typically combines a lighter golden or cream background with prominent dark brown grain stripes. As it is natural wood, the exact colour, stripe width and pattern will vary.

Can separate pieces be grain matched?

The direction and positioning of the striped grain can be planned before cutting and bonding. Exact matching should not be expected because every section of natural veneer is different.

Can Zebrano veneer be lacquered or oiled?

The surface can be finished with a compatible clear lacquer, oil or other suitable timber finish. Test the finish first because it may darken the timber and increase the grain contrast.

Related Veneer Products

Browse our real wood veneer sheets and wood veneer edging for alternative timber species, sizes and formats.