This 24V 30W non-dimmable LED driver is built to power indoor LED tape and strip lighting with a steady, constant voltage output. With an IP20 rating, it is designed purely for dry, indoor installations such as coving, cabinetry, display shelving and feature lighting where a dependable, protected power source is essential.

Once fitted, this driver quietly does its job in the background, converting mains voltage into a clean 24V DC supply so your LED strips run at consistent brightness without flicker or hum. Its slim profile makes it easy to fit into tight recesses, while auto-recovery overload protection and a thermal cut-out mean it is built to handle the occasional knock or overload without needing to be replaced, giving you the kind of everyday reliability that trade installers can fit and forget.

Key Features:

• Constant voltage output of 24V DC for stable, flicker-free LED performance
• 30W maximum load, suited to a range of LED strip runs
• Non-dimmable design for simple, straightforward wiring
• IP20 rated for safe indoor-only use
• Automatic overload protection with auto recovery
• Thermal cut-out safeguard against overheating
• Slim, compact polycarbonate enclosure for easy mounting

Technical Specifications:

• Input Voltage: 220-240V AC, 50/60Hz
• Output Voltage: 24V DC (Constant Voltage)
• Maximum Load: 30W
• Minimum Load: 0W
• Primary Running Current: 180mA
• Dimmable: No
• IP Rating: IP20 (indoor use only)
• Protection Class: Class II
• Operating Temperature: -20°C to +40°C
• Dimensions: 155 x 53 x 16mm
• Weight: 0.110kg
• Material: Polycarbonate
• Warranty: 5 years

Fit this driver in a well-ventilated, indoor location, keeping it uncovered so air can flow freely around the casing and prevent overheating. It pairs well with 24V LED strips, including runs up to around 6.3m depending on the strip's wattage, making it a practical choice for coving, joinery and display lighting projects.