This 24V 75W Triac dimmable LED driver provides constant-voltage power for compatible indoor LED strip installations. Its IP20-rated white polycarbonate housing and leading- and trailing-edge dimming compatibility make it a practical choice where controllable LED tape lighting is required.

For an installation built around 24V LED tape, the driver is the hidden component that helps bring the finished lighting scheme together. Choose the strip wattage and run length to suit the space, then check the connected load against the driver's stated 30W minimum and 75W maximum before fitting.

Key Features:

• 24VDC constant-voltage output for compatible LED strip.
• Triac dimmable with leading- and trailing-edge operation from 10% to 100%.
• IP20 rating for indoor use only.
• Loop in/out live and neutral input connections.
• Automatic recovery for short-circuit, overload and thermal protection as specified.

Technical Specifications:

• Input voltage: 220-240V; 50/60Hz.
• Output: 24VDC, 3.125A, constant voltage.
• LED load: 30W (1.25A) minimum; 75W maximum.
• Dimensions: 220 x 58 x 40mm.
• Weight: 0.58kg product weight.
• Operating temperature: -25°C to +50°C; room ambient temperature not to exceed 50°C.
• Material and finish: White polycarbonate.
• SKU: LBC020001.

Install indoors without covering the driver, and check the LED strip's voltage, total wattage and maximum run length before connection. The stated compatible runs are up to 15.6m at 4.8W, 7.8m at 9.6W or 5.2m at 14.4W for the specified 24V LED strips. Use an appropriate compatible dimmer and follow the manufacturer's installation instructions.