Ash Wood Veneer Edging Tape – 30 mm x 100 m

Finish exposed furniture-panel edges with ash wood veneer edging supplied in a 30 mm wide, 100 m roll. Also described as wood veneer edge banding, this strip provides a real ash surface for cabinet components, shelving, furniture repairs and interior joinery.

This roll is supplied unglued, so a separate compatible adhesive is required. Choose the bonding method to suit the veneer, receiving surface and application instructions.

Ash has a naturally light appearance with visible grain. Compare the veneer with the adjoining panel or existing furniture where a close colour match matters, as natural wood varies in shade and grain.

Product Specifications

• Stock code: VEN026C
• Material: ash wood veneer
• Product format: veneer edging roll
• Strip width: 30 mm
• Roll length: 100 m
• Backing: unglued; separate adhesive required

Choosing the Correct Edging Width

Measure the exposed edge before ordering. The 30 mm dimension is the width of the veneer strip, rather than a guaranteed fit for a particular board thickness. Allow suitable clearance for controlled trimming after bonding.

Calculate the total length of the edges being covered and include an allowance for cuts, trimming and waste.

Fitting and Finishing Guidance

Prepare a clean, dry, smooth and stable receiving edge. Select an adhesive confirmed as suitable for the veneer and substrate, and follow its preparation, pressure and curing instructions.

Test the complete process on an offcut before working on the finished component. Allow the bond to set before trimming, and check compatibility before applying a finishing product. Do not treat this unglued roll as iron-on or peel-and-stick edging.

Frequently Asked Questions

What size is this ash veneer edging roll?

The veneer strip is 30 mm wide and supplied in a 100 m roll.

Is this ash veneer edging iron-on?

No. This product is supplied unglued and requires a separate compatible adhesive.

What can ash veneer edging be used for?

It can cover exposed cabinet, shelf and furniture-panel edges where the veneer, substrate and bonding method are suitable.

Will it match my existing ash furniture?

Natural ash varies in colour and grain. Compare a sample with the existing surface before fitting where a close match is important.

How much edging should I order?

Add the lengths of the edges to be covered, then allow for cuts, trimming and waste. Compare that requirement with the listed 100 m roll length.

Related Veneers and Edgings

Browse our browse veneers and edgings guide, or see the full range of wood veneer edging rolls.

Looking for a different width? See the pre-glued Ash FSHM veneer edging 25mm x 100m (pre-glued) or the pre-glued Ash FSHM veneer edging 50mm x 100m (pre-glued).