The Blum AVENTOS HK-S 20K7A41 opening-angle stop restricts the opening travel of a compatible current-generation AVENTOS HK-S cabinet front to approximately 100°. It is a practical option when the standard 107° opening is greater than the available overhead clearance or the required movement of the cabinet front.

This genuine Blum accessory is identified by article number 20K7A41 and stock code HI20K7A41. Its dark-grey TGR colour distinguishes it from the dust-grey 75° version and helps it coordinate discreetly with compatible HK-S lift mechanisms.

Restrict an HK-S front to approximately 100°

Standard AVENTOS HK-S mechanisms have a maximum opening angle of approximately 107°. Fitting the 20K7A41 stop mechanically reduces that travel to approximately 100°, retaining broad access to the cabinet while slightly limiting how far the front rises.

The stop can be used in compatible current-generation standard and TIP-ON HK-S applications. It is a passive mechanical accessory and does not itself provide soft closing, push-to-open operation or powered movement. The function of the complete cabinet installation depends on the selected HK-S mechanism and associated components.

Measure the available clearance and test the completed installation carefully. The 100° restriction does not replace correct cabinet planning and must not be treated as a guarantee that the front cannot contact a ceiling, cornice, adjacent cabinet or other obstruction.

Check the AVENTOS generation carefully

Article 20K7A41 is specifically for the current AVENTOS HK-S system. It is not the same component as legacy AVENTOS HK article 20K7041, even though both provide a nominal 100° restriction. It must also not be confused with current HK-S article 20K7A11, which restricts the opening angle to 75°. If your installation requires the 75° restriction, choose the 75° AVENTOS HK-S opening-angle stop instead.

Key features

• Genuine Blum AVENTOS HK-S accessory
• Blum article number 20K7A41
• Stock code HI20K7A41
• Restricts compatible HK-S applications to approximately 100°
• For current-generation AVENTOS HK-S
• Suitable for compatible standard and TIP-ON HK-S configurations
• Passive mechanical opening-angle restriction
• Dark-grey Blum TGR colour

Product details

• Manufacturer: Blum
• Range: AVENTOS HK-S
• Blum article number: 20K7A41
• Stock code: HI20K7A41
• Product type: Opening-angle stop
• Restricted opening angle: Approximately 100°
• Operation: Passive mechanical restriction
• Colour: Dark grey (TGR)
• Compatibility: Current-generation AVENTOS HK-S
• Supplied quantity: 1 piece per unit purchased

Installation and planning

Use current Blum fitting information and install the stop in the specified position on a compatible HK-S mechanism. Confirm the cabinet construction, lift-system generation and required opening angle before fitting. Test the assembled front through its complete movement and verify clearance around all nearby surfaces.

Frequently asked questions

What does the Blum 20K7A41 opening-angle stop do?

It mechanically restricts a compatible current-generation AVENTOS HK-S cabinet front to an opening angle of approximately 100°.

Can it be used with standard and TIP-ON HK-S mechanisms?

Yes. It is listed for compatible current-generation standard and TIP-ON AVENTOS HK-S applications, but the stop itself does not provide either opening or closing technology.

Is this the legacy AVENTOS HK 100° stop?

No. This is current HK-S article 20K7A41. The legacy AVENTOS HK 100° opening-angle stop has article number 20K7041.

Is this the 75° HK-S opening-angle stop?

No. Current AVENTOS HK-S article 20K7A11 provides the 75° restriction. This 20K7A41 accessory provides an approximately 100° restriction.

Does the stop guarantee that the cabinet front cannot hit an obstruction?

No. Measure the available space, plan the cabinet correctly and test the completed installation to confirm adequate clearance.

Browse the complete Blum AVENTOS HK-S range for compatible lift mechanisms and related components, or explore compatible AVENTOS components.