Cherry Flexible Wood Veneer FSHM 30mm x 100m is a genuine real wood veneer edging roll with a pre-applied heat-activated adhesive, designed for finishing furniture, cabinets, shelving, door components and interior joinery.

Cherry is valued for its warm natural colour, fine grain and smooth, refined appearance. Newly finished cherry can appear light golden brown before gradually developing a deeper reddish-brown tone through exposure to light. This natural ageing process gives cherry veneer a distinctive richness suited to both traditional furniture and contemporary interiors.

The pre-glued backing removes the need to apply a separate adhesive to the board edge. When activated using suitable edge-banding equipment or controlled heat and pressure, it provides an efficient way to create a clean, professional real wood finish.

The 30mm width provides additional coverage for wider board edges, thicker shelves, cabinet components, drawer fronts, doors, trims and repair sections. Supplied in a 100m roll, it is a practical choice for professional workshops, furniture production and repeated edging work.

Key Features

• Genuine cherry real wood veneer
• Pre-applied heat-activated adhesive
• Warm golden to reddish-brown appearance
• Fine, smooth and attractive grain
• Naturally develops a richer colour over time
• Flexible construction for easier handling
• Suitable for wider furniture-board edges
• Can be trimmed, lightly sanded and finished
• 30mm width
• 100m roll length

Typical Applications

• Cabinet and carcass edging
• Wider shelf edges
• Furniture manufacture and restoration
• Drawer fronts and cabinet components
• Wardrobes and fitted furniture
• Internal door edges
• Decorative trims and mouldings
• Shopfitting and display units
• Joinery repairs
• Refurbishment of cherry-veneered panels

Appearance

Cherry veneer typically ranges from pale golden brown to warm reddish-brown, with a fine, generally straight grain and occasional natural figure. Its smooth texture and rich colouring make it a popular choice for high-quality furniture, cabinetry and decorative joinery.

As this is a genuine natural wood product, variations in colour, grain and figure will occur throughout the roll. Cherry also darkens naturally with exposure to daylight, so newly applied edging may initially appear lighter than established cherry surfaces.

Application Guidance

Ensure the receiving edge is clean, dry, smooth and free from dust, grease and loose material.

Position the veneer accurately and activate the adhesive using suitable edge-banding machinery or a controlled heat source. Apply firm, even pressure while the adhesive is warm to achieve consistent contact across the full width.

Allow the adhesive to cool fully before trimming the excess veneer. Lightly sand where required and apply a compatible lacquer, oil, stain or clear protective finish.

Always test the application temperature, pressure and selected finishing product on an offcut before completing the full installation.

Product Information