Drawer Front Adjuster Ø25mm Black — Plastic with Steel Insert

A single-part drawer front adjusting fitting designed to press into a Ø25mm hole in the drawer front. The floating action inside the fitting allows ±2mm adjustment of the drawer front in two directions, enabling precise alignment after installation. Only the head of the fixing screw is visible from inside the drawer, giving a clean internal finish. Supplied as a single piece — M4 fixings must be ordered separately.

Product Specifications

• Colour/finish: Black
• Material: Plastic body with steel insert
• Drill hole diameter: Ø25mm
• Dimensions: Ø25 x 12.5mm
• Adjustment: ±2mm in two directions
• Fixings: M4 (order separately)
• Pack quantity: 1 piece

Frequently Asked Questions

What size hole does this drawer front adjuster require?

It requires a Ø25mm hole drilled in the drawer front. The fitting presses directly into the hole — no additional tools or clips are needed for installation.

How much adjustment does this fitting provide?

The floating action inside the fitting allows ±2mm adjustment in two directions, making it straightforward to align drawer fronts precisely after fitting.

Are fixings included?

No — M4 fixings must be ordered separately. Please ensure you have the appropriate M4 screws before installation.

Is this suitable for all drawer systems?

This fitting is designed for use where a Ø25mm hole can be drilled in the drawer front. Check compatibility with your specific drawer system before ordering.