Bring a clean brushed nickel finish to an indoor ceiling with this Fireguard Next Generation recessed downlight. The round, die-cast aluminium fitting accepts a separately selected GU10 LED lamp up to 7W, letting the lamp choice determine the light output and colour while the fitting provides a tidy, fire-rated installation.

In a room with brushed metal switches or handles, the bezel gives the ceiling a coordinated finish rather than a stark contrast. Once installed, the spring clips hold the fitting in place and the recessed form keeps attention on the light, not the hardware. The lamp is not supplied, so it can be chosen to suit the space.

Key Features:

• Brushed nickel, round recessed fitting for indoor use outside Zone 2
• Fire-rated downlight tested for use in fire-rated ceilings; check the relevant ceiling-system certificates
• GU10 lampholder for a separately purchased LED lamp, maximum 7W
• Spring-clip fixing and loop in/loop out press fit terminal
• IP20 rating and die-cast aluminium rim

Technical Specifications:

• Ceiling aperture: 74mm
• Overall dimensions: 108.7 x 87 mm
• Minimum ceiling void: 150mm
• Maximum ceiling thickness: 30mm
• Voltage rating: 220-240
• Operating frequency: 50/60Hz
• Electrical class: I
• Dimming: Check with lamp manufacturer
• Product weight: 0.205kg

Plan the 74mm cut-out and 150mm minimum void before fitting, and use the instruction sheet to check insulation coverage. Choose a suitable GU10 lamp separately and check its dimming compatibility if required. For a fire-rated ceiling, consult the current fire-testing certificates for the specific ceiling system before installation.