Maple Flexible Wood Veneer FSHM 22mm x 100m is a genuine real wood veneer edging roll with a pre-applied heat-activated adhesive, designed for furniture manufacture, cabinet edging, shelving, door components and detailed interior joinery.

Maple is valued for its pale cream to light golden appearance, fine uniform grain and smooth, consistent surface. Its clean, neutral tone makes it particularly suitable for contemporary furniture, fitted interiors and cabinetry where a bright, light timber finish is required.

The pre-glued backing removes the need to apply a separate adhesive to the board edge. When activated using suitable edge-banding machinery or controlled heat and pressure, it provides a neat and efficient method of finishing compatible furniture-board edges.

The 22mm width is suited to standard panel edges, shelves, cabinet parts, drawer components and other narrow joinery details. Supplied in a 100m roll, it provides a practical quantity for workshops, repeated edging tasks and production use.

Key Features

• Genuine maple real wood veneer
• Pre-applied heat-activated adhesive
• Pale cream to light golden natural appearance
• Fine, uniform and consistent grain
• Flexible construction for easier handling
• Suitable for standard furniture-board edges
• Can be trimmed, lightly sanded and finished
• 22mm width
• 100m roll length

Typical Applications

• Cabinet and carcass edging
• Shelf edges
• Furniture manufacture and restoration
• Drawer fronts and components
• Wardrobes and fitted furniture
• Internal door edges
• Decorative trims
• Display units and shopfitting
• Joinery repairs
• Refurbishment of maple-veneered panels

Appearance

Maple veneer typically has a pale cream to light golden colour with a fine, even grain. Its clean and consistent appearance works well in modern, Scandinavian-inspired and minimalist interiors.

As this is a genuine natural wood product, variations in colour, grain and figure may occur throughout the roll.

Application Guidance

Ensure the receiving edge is clean, dry, smooth and free from dust, grease and loose material.

Position the veneer accurately and activate the adhesive using suitable edge-banding equipment or a controlled heat source. Apply firm, even pressure while the adhesive is warm to ensure consistent contact across the complete width.

Allow the adhesive to cool before trimming. Lightly sand the finished edge as required and apply a compatible lacquer, oil, stain or clear finish.

Always test the application temperature, pressure and selected finish on an offcut before completing the full installation.

Product Information