Maple Flexible Wood Veneer FSHM 30mm x 100m is a genuine real wood veneer edging roll with a factory-applied heat-activated adhesive, designed for clean and efficient finishing of wider furniture panels, cabinetry, shelving and interior joinery.

Maple is recognised for its pale cream colour, fine grain and smooth, understated appearance. It is particularly suitable for contemporary furniture, fitted interiors, display units and cabinetry where a light natural timber finish is required.

The 30mm width provides additional coverage for thicker boards, wider panel edges and applications where a generous trimming allowance is useful. Its pre-glued backing removes the need to apply separate adhesive, helping reduce preparation time and produce a neat, consistent result.

The adhesive is activated using controlled heat and pressure, allowing the veneer to be applied with a suitable edging machine, veneer iron or similar heat source. Once bonded and cooled, the excess veneer can be trimmed and lightly sanded to create a professional finished edge.

Key Features

• Genuine maple wood veneer surface
• Factory-applied heat-activated adhesive
• Flexible construction for easier handling
• Pale natural colour with a fine, subtle grain
• 30mm width for wider edges and thicker panels
• Suitable for cabinet, shelf and furniture edging
• Supplied in a practical 100m roll
• Can be trimmed, sanded and finished after application

Typical Applications

• Wider cabinet and cupboard edges
• Thick shelf edges
• Drawer fronts and furniture components
• Door and panel edges
• Furniture manufacture and repair
• Shopfitting and display units
• Interior joinery
• Matching exposed board edges

Product Specifications

Application Guidance

Ensure the board edge is clean, dry, smooth and free from dust, oil or grease. Position the veneer carefully and apply even heat with firm, consistent pressure to activate the adhesive.

Work progressively along the edge to reduce the risk of movement, trapped air or uneven bonding. Allow the adhesive to cool fully before trimming the excess veneer.

The finished edge can then be lightly sanded and coated with a compatible lacquer, oil, stain or clear finish where required.

As maple is a natural material, variations in grain, shade and figure should be expected between rolls and individual sections.