Oak Flexible Wood Veneer FSHM 25mm x 100m is a genuine real wood veneer edging roll with a factory-applied heat-activated adhesive, designed for efficient finishing of furniture panels, cabinetry, shelving and interior joinery.

Oak is prized for its warm natural colouring, distinctive grain and durable hardwood appearance. It works equally well in traditional and contemporary furniture, helping exposed board edges coordinate with oak-faced panels, doors, cabinets and timber components.

The 25mm width provides useful additional coverage for thicker boards, wider panel edges and applications where a trimming allowance is needed. Its pre-glued backing removes the need to apply separate adhesive, helping reduce preparation time and support a clean, consistent bond.

The adhesive is activated using controlled heat and firm pressure. The veneer can be applied with a suitable edging machine, veneer iron or similar heat source. Once cooled, the excess material can be trimmed and lightly sanded to achieve a neat, professional finish.

Key Features

• Genuine oak wood veneer surface
• Factory-applied heat-activated adhesive
• Flexible construction for easier positioning
• Warm natural colour with visible oak grain
• 25mm width for wider edges and trimming allowance
• Suitable for furniture, cabinetry and shelving
• Supplied in a 100m roll
• Can be trimmed, sanded and finished after application

Typical Applications

• Cabinet and cupboard edging
• Shelf edges
• Drawer fronts and furniture components
• Door and panel edges
• Furniture manufacture and repair
• Shopfitting and display units
• Interior joinery
• Matching exposed edges on oak-faced boards

Product Specifications

Application Guidance

Ensure the board edge is clean, dry, smooth and free from dust, oil or grease. Position the veneer carefully and apply even heat with firm, consistent pressure to activate the adhesive.

Work progressively along the edge to reduce the risk of movement, trapped air or uneven bonding. Allow the adhesive to cool fully before trimming the excess veneer.

The finished edge can then be lightly sanded and coated with a compatible lacquer, oil, stain or clear finish where required.

As oak is a natural wood product, variations in colour, grain and figure should be expected between rolls and individual sections.