Oak Flexible Wood Veneer FSHM 30mm x 100m is a genuine real wood veneer edging roll with a factory-applied heat-activated adhesive, designed for clean and efficient finishing of furniture panels, shelving, cabinetry and interior joinery.

Oak is widely appreciated for its warm natural colouring, distinctive grain and timeless hardwood appearance. It is suitable for both traditional and contemporary furniture, helping exposed board edges coordinate neatly with oak-faced panels, doors, cabinets and timber components.

The 30mm width provides additional coverage for wider board edges, thicker panels and applications where a generous trimming allowance is useful. Its pre-glued backing removes the need to apply separate adhesive, helping reduce preparation time and produce a clean, consistent bond.

The adhesive is activated using controlled heat and firm pressure. The veneer can be applied with a suitable edging machine, veneer iron or similar controlled heat source. Once the bond has cooled, the excess material can be trimmed and lightly sanded to create a neat, professional finish.

Key Features

• Genuine oak wood veneer surface
• Factory-applied heat-activated adhesive
• Flexible construction for easier positioning
• Warm natural colour with visible oak grain
• 30mm width for wider edges and thicker panels
• Suitable for furniture, cabinetry and shelving
• Supplied in a practical 100m roll
• Can be trimmed, sanded and finished after application

Typical Applications

• Cabinet and cupboard edging
• Wider shelf edges
• Drawer fronts and furniture components
• Door and panel edges
• Furniture manufacture and repair
• Shopfitting and display units
• Interior joinery
• Matching exposed edges on oak-faced boards

Product Specifications

Application Guidance

Ensure the board edge is clean, dry, smooth and free from dust, oil or grease. Position the veneer carefully and apply even heat with firm, consistent pressure to activate the adhesive.

Work progressively along the edge to reduce the risk of movement, bubbles or uneven bonding. Allow the adhesive to cool fully before trimming the excess veneer.

The finished edge can then be lightly sanded and coated with a compatible lacquer, oil, stain or clear finish where required.

As oak is a natural wood product, variations in shade, grain and figure should be expected between rolls and individual sections.