Oak Flexible Wood Veneer FSHM 50mm x 100m is a genuine real wood veneer edging roll with a factory-applied heat-activated adhesive, designed for finishing wide panel edges, substantial furniture components, cabinetry and interior joinery.

Oak is valued for its warm natural colouring, distinctive grain and classic hardwood appearance. It is suitable for both traditional and contemporary furniture, helping exposed board edges coordinate with oak-faced panels, doors, cabinets and timber components.

The generous 50mm width provides excellent coverage for thicker boards, built-up panels, wide furniture edges and repair work where additional trimming allowance is required. Its pre-glued backing removes the need to apply separate adhesive, helping reduce preparation time and support a clean, consistent bond.

The adhesive is activated using controlled heat and firm pressure. The veneer can be applied with a suitable edging machine, veneer iron or similar controlled heat source. Once the bond has cooled, the excess material can be trimmed and lightly sanded to create a neat, professional finish.

Key Features

• Genuine oak wood veneer surface
• Factory-applied heat-activated adhesive
• Flexible construction for easier positioning
• Warm natural colour with visible oak grain
• Wide 50mm format for larger edges and components
• Suitable for furniture, cabinetry and joinery
• Supplied in a practical 100m roll
• Can be trimmed, sanded and finished after application

Typical Applications

• Wide cabinet and cupboard edges
• Thick shelving and built-up panels
• Door and furniture component edges
• Drawer fronts and fascia sections
• Furniture manufacture and refurbishment
• Shopfitting and display units
• Interior joinery
• Repairing or matching exposed edges on oak-faced boards

Product Specifications

Application Guidance

Ensure the panel edge is clean, dry, smooth and free from dust, oil or grease. Position the veneer carefully and apply even heat with firm, consistent pressure to activate the adhesive.

Work progressively along the edge to reduce the risk of movement, trapped air or uneven bonding. Allow the adhesive to cool fully before trimming the excess material.

The finished edge can then be lightly sanded and coated with a compatible lacquer, oil, stain or clear finish where required.

As oak is a natural wood product, variations in shade, grain and figure should be expected between rolls and individual sections.