Sapele Flexible Wood Veneer FSHM 22mm x 100m Pre-Glued

Sapele Flexible Wood Veneer FSHM 22mm x 100m is a genuine real-wood edging roll with a factory-applied heat-activated adhesive. It is designed to give exposed furniture-board edges the rich reddish-brown colour, fine texture and distinctive natural character of Sapele.

Sapele is valued for its warm golden-to-deep reddish-brown colouring and attractive grain, which may display straight, interlocked or ribbon-like figure depending on the cut. Its sophisticated appearance makes it particularly suitable for high-quality furniture, cabinetry, doors, fitted interiors and decorative joinery.

At 22mm wide, the veneer is well suited to many standard furniture panels. When used on common 18mm board, it normally provides a small trimming allowance on both faces. The 100m roll supports repeated workshop use and production edging.

What Does FSHM Mean?

FSHM refers to veneer that is Fleeced, Sanded and supplied with Hot-Melt adhesive.

The supporting fleece improves the flexibility and stability of the natural veneer. The visible Sapele face is sanded smooth, while the reverse carries a factory-applied hot-melt adhesive.

The adhesive is activated using controlled heat and firm pressure, so a separate glue does not normally need to be applied.

Key Features

• Genuine natural Sapele veneer
• Rich golden-to-reddish-brown colour
• Fine texture with attractive natural grain
• Factory-applied heat-activated adhesive
• Fleeced backing for flexibility and stability
• Smooth, sanded real-wood face
• 22mm width suited to many standard panels
• Long 100m roll for workshop use
• No separate adhesive normally required
• Can be trimmed and finished after bonding
• Suitable for furniture, cabinets and joinery
• Accepts compatible oils, stains and lacquers

Typical Applications

• Cabinet and cupboard edging
• Shelf and bookcase edges
• Wardrobe and bedroom furniture
• Drawer fronts and furniture components
• Door and panel edges
• Sapele-faced MDF and plywood
• Office and reception furniture
• Retail displays and shopfitting
• Furniture repairs and restoration
• Decorative trims and fitted interiors
• Bespoke furniture manufacture
• Interior architectural joinery

Suitable for Standard Furniture Panels

The 22mm width is particularly useful for edging common 18mm MDF, chipboard, plywood and veneered furniture board. It provides sufficient material to cover the exposed edge while normally leaving a small overhang for trimming flush.

Always measure the actual panel thickness before cutting and applying the veneer.

Application Guidance

Allow the veneer and panel material to acclimatise in the same working environment. Prepare a straight, smooth, clean and dry edge, removing dust, grease, oil and loose fibres.

Cut the veneer slightly longer than the finished component. Position it with an even trimming allowance and activate the adhesive using a suitable edge-banding machine, veneer iron or controlled heat source.

Work progressively along the component, applying consistent heat and firm pressure. Allow the adhesive to cool and form its bond before trimming.

Application requirements vary according to the substrate, equipment and working environment. Always test the veneer and settings on an offcut before starting a full production run.

Trimming and Finishing

Once the adhesive has cooled, trim the excess veneer flush with the panel faces using a sharp veneer trimmer or suitable cutting tool.

Sapele can have interlocked grain, so pay careful attention to grain direction when trimming. Use sharp tools and take light passes to reduce the risk of lifting or tearing the natural surface.

The sanded veneer can be finished with a compatible clear lacquer, oil, wax or wood stain. Clear finishes generally deepen the reddish-brown colour and highlight Sapele’s natural lustre and figure.

Avoid aggressive sanding because decorative veneer is much thinner than solid timber. Test the complete finishing system on an offcut first.

Natural Wood Variation

Sapele is a genuine natural material. Colour, grain direction, ribbon figure and other markings will vary between sections and production batches. These differences are normal and contribute to the authentic appearance of real-wood edging. Sapele commonly ranges from golden brown to deeper reddish brown and may darken after finishing or with age.

Frequently Asked Questions

Is this genuine Sapele veneer?

Yes. The visible surface is genuine natural Sapele rather than a printed or imitation wood-effect material.

Does it have adhesive on the back?

Yes. It has a factory-applied hot-melt adhesive activated using controlled heat and pressure.

Is 22mm veneer suitable for 18mm furniture board?

Yes. It normally leaves a small overhang on both faces of an 18mm panel, allowing the veneer to be trimmed flush after bonding.

Is Sapele the same as mahogany?

No. Sapele is a separate timber species, although its warm reddish-brown appearance is often associated with mahogany-style furniture and joinery.

Can it be applied using an iron?

A suitable veneer iron or controlled heat source can be used. An appropriate edge-banding machine may provide more consistent results for production work.

Can Sapele veneer be stained or lacquered?

Yes. It accepts many compatible wood stains, oils and lacquers. Always test the chosen finish on an offcut first.

Browse our complete real wood veneer edging collection, compare our flexible sheet veneers, or explore the full veneers and edgings range.