Sapele Flexible Wood Veneer FSHM 50mm × 50m Pre-Glued is a genuine real-wood edging roll with a factory-applied heat-activated adhesive. It provides wide exposed board edges with the rich reddish-brown colour, fine texture and distinctive natural character of Sapele.

Sapele is valued for its warm golden-to-deep reddish-brown colouring and attractive grain, which may display straight, interlocked or ribbon-like figure depending on the cut. Its sophisticated appearance makes it particularly suitable for high-quality furniture, cabinetry, doors, fitted interiors and decorative joinery.

The 50mm width is designed for thicker panels, wide board edges, door components and applications where standard narrow edging does not provide sufficient coverage. The 50m roll is well suited to individual contracts, bespoke furniture projects and workshops that do not require a full 100m roll.

What Does FSHM Mean?

FSHM refers to veneer that is Fleeced, Sanded and supplied with Hot-Melt adhesive.

The supporting fleece improves the flexibility and stability of the natural veneer. The visible Sapele face is sanded smooth, while the reverse carries a factory-applied hot-melt adhesive. The adhesive is activated using controlled heat and firm pressure.

Key Features

• Genuine natural Sapele veneer
• Rich golden-to-reddish-brown colour with natural figure
• Fine texture with attractive grain character
• Factory-applied heat-activated adhesive
• Fleeced backing for flexibility and stability
• Smooth, sanded real-wood face
• Wide 50mm format for substantial panel edges
• Practical 50m roll for smaller projects
• No separate adhesive normally required
• Can be trimmed and finished after bonding
• Accepts compatible oils, stains and lacquers

Typical Applications

• Wide cabinet and cupboard edges
• Door and frame edges
• Thick shelf and furniture panel edges
• Drawer fronts and wide furniture components
• Sapele-faced MDF and plywood
• Office and reception furniture
• Architectural and fitted joinery
• Retail displays and shopfitting
• Furniture repairs and refurbishment
• Bespoke interior joinery

Why Choose the 50m Roll?

The 50m roll provides the same wide 50mm coverage in a more manageable quantity. It is ideal for individual fitted-furniture installations, restoration projects and shorter production runs where a full 100m roll would result in unnecessary surplus.

Application Guidance

Allow the veneer and panel material to acclimatise in the same working environment. Prepare a straight, smooth, clean and dry edge, removing dust, grease, oil and loose fibres.

Cut the veneer slightly longer than the finished component and activate the adhesive using a suitable edge-banding machine, veneer iron or controlled heat source. Apply firm and consistent pressure while the adhesive remains warm. Allow to cool fully before trimming.

Sapele can have interlocked grain, so pay careful attention to grain direction when trimming. Always test on an offcut before starting a full production run.

Trimming and Finishing

Once the bond has cooled, trim the excess veneer flush with the panel faces using a sharp veneer trimmer or suitable cutting tool. The sanded veneer can be finished with a compatible clear lacquer, oil, wax or wood stain. Clear finishes generally deepen the reddish-brown colour and highlight Sapele’s natural lustre. Avoid aggressive sanding and always test the finishing system on an offcut first.

Natural Wood Variation

Sapele is a genuine natural material. Colour, grain direction, ribbon figure and other markings will vary between sections and production batches. These differences are normal and contribute to the authentic appearance of real-wood edging.

Frequently Asked Questions

Is this genuine Sapele veneer?

Yes. The visible surface is genuine natural Sapele rather than a printed or imitation wood-effect material.

Does it have adhesive on the back?

Yes. It has a factory-applied hot-melt adhesive activated using controlled heat and pressure.

Why choose 50mm width?

The 50mm width covers thicker panels and wide components where narrower edging would not provide sufficient coverage.

Is this the 50m or 100m roll?

This listing is for one roll measuring 50mm wide by 50m long.

Can Sapele veneer be stained or lacquered?

Yes. It accepts many compatible wood stains, oils and lacquers. Always test the chosen finish on an offcut first.

Browse our complete real wood veneer edging collection, compare our flexible sheet veneers, or explore the full veneers and edgings range.