Sika Stixall Extreme Power Crystal Clear Adhesive & Sealant 290ml provides powerful, flexible bonding and sealing with a discreet transparent finish. It is ideal for glass, transparent panels, display work and visible joints where a coloured adhesive would be distracting.

Why choose Stixall Extreme Power Crystal Clear?

• Crystal-clear finish for discreet bonding and sealing
• Powerful adhesion to many common building materials
• Can be applied to many damp or wet surfaces
• Waterproof and weather-resistant after curing
• Suitable for interior and exterior applications
• Flexible hybrid-polymer formulation
• Solvent-free and low odour
• Gap-filling properties for uneven surfaces

Ideal applications

• Glass and transparent panels
• Display work and decorative features
• Visible joints requiring a discreet finish
• Clear trims and light fittings
• Bathrooms, kitchens and utility areas
• General interior and exterior repairs

Suitable materials

Stixall Extreme Power Crystal Clear adheres to many porous and non-porous materials, including glass, timber, metal, concrete, brick, masonry, ceramics, plasterboard and many plastics.

Always test adhesion, staining and clarity on an inconspicuous area before completing prominent work.

Technical information

• Pack size: 290ml
• Colour: Crystal Clear
• Chemistry: Hybrid polymer
• Service temperature: approximately −40°C to +70°C
• Cure rate: approximately 1.8mm per 24 hours at 23°C and 50% relative humidity
• Skin formation: approximately 15–30 minutes
• Coverage: approximately 10 metres with a 6mm bead
• Applied using a standard sealant gun

Application

1. Ensure surfaces are sound and free from dust, grease, loose material and other contaminants.
2. Remove standing water wherever possible.
3. Cut the cartridge tip without damaging the threaded section.
4. Fit the nozzle and cut it to the required bead size.
5. Apply beads or a zig-zag pattern for bonding and a continuous bead for sealing.
6. Press bonded parts together firmly and tool sealant before skin formation.

Apply neatly because the completed joint will remain visible. Heavy, overhead or safety-critical components should be temporarily or mechanically supported until the adhesive has cured.

Important limitations

Consult the latest Sika Product Data Sheet before use. Test compatibility with plastics, coatings and natural stone. Do not use for structural glazing, aquarium manufacture, contact with bitumen or asphalt, or substrates that bleed oil or plasticiser. Wet-surface adhesion does not make the product suitable for permanent water immersion.

Frequently asked questions

Does Stixall Extreme Power Crystal Clear dry transparent?

Yes. It is formulated to provide a crystal-clear finish for discreet visible joints. Test the cured appearance on an inconspicuous area before completing prominent work.

Can it be used on glass?

It adheres to glass and many other common building materials. It must not be used for structural glazing or as the sole safety fixing for heavy glass.

Can it be used outside?

Yes. It is waterproof and weather-resistant after curing and is suitable for compatible interior and exterior applications.

Will it stick to damp or wet surfaces?

It can bond many damp or wet building surfaces. Remove dirt, grease, loose material and standing water wherever possible. It is not designed for permanent water immersion.

How quickly does it cure?

The published cure rate is approximately 1.8mm per 24 hours at 23°C and 50% relative humidity. Skin formation takes approximately 15–30 minutes. Conditions and bead depth will affect curing time.

View the complete Sika Everbuild range at Hart Wholesale.