TECTUS TE380 3D in Satin Chrome Look

The TE380 3D in Satin Chrome Look is a premium SIMONSWERK concealed door hinge for carefully specified architectural installations. It is hidden when the door is closed, keeping exposed hinge knuckles out of the finished door line.

The TE380 3D is intended for rebated residential doors. Its rebate preparation differs from unrebated standard models, so select it using the exact door and frame geometry.

Satin Chrome Look provides a cool metallic appearance for coordinating with chrome-look interior fittings. The word look describes the finish appearance; it should not be used to infer the construction material of the hinge.

Model-specific technical information

• Exact model: TE380 3D
• Version: REBATED
• Finish: Satin Chrome Look (SW 124)
• Reference capacity: up to 60 kg using two hinges on a 1 m × 2 m door leaf, subject to manufacturer technical conditions
• Minimum door thickness: 36.0 mm
• Frame width: 26 mm; hinge length: 190 mm
• Country of origin: Germany
• SIMONSWERK manufacturer part number: 5 400640 0 12402
• Stock code: HIB218A
• Quantity supplied: one hinge

comfortable 3D adjustment (side ± 3.0 mm, height ± 3.0 mm, compression ± 1.0 mm). Follow the manufacturer’s sequence when setting alignment.

Optional routing accessories

The manufacturer lists 52509555 (frame, step 1), 52509565 (frame, step 2), 52509575 (frame, step 3), 52509585 (door, step 1), 52509595 (door, step 2) for this exact version. Templates require the appropriate universal milling frame when used with the SIMONSWERK jig system. Jigs, templates and milling frames are optional accessories, purchased separately from the hinge.

Universal milling frame: check the specified frame and supplied template components before ordering.

Installation guidance and related hinges

Read the SIMONSWERK TE380 3D technical information and routing instructions before preparation. Check door dimensions, weight, frame construction and any receiver capacity or closer forces. The quoted load is a reference for two hinges, not one hinge. At an opening position of 180°, additional door fixing may be needed.

Browse the TECTUS concealed hinge range for related models and finishes, or contact Hart Wholesale with the exact door details.

Is this the same as a standard TE380 hinge?

Order by the full model and version name: TE380 3D. Specialist versions can have different preparation, capacity and accessory requirements. Match the manufacturer number before replacing an existing hinge.

What does one order unit contain?

One TE380 3D hinge in Satin Chrome Look, SW 124. Optional routing equipment and separately listed installation accessories are purchased separately.

How do I confirm the correct part?

Use stock code HIB218A, manufacturer part number 5 400640 0 12402, the full version name and SW 124. A similar appearance alone does not establish interchangeability.