Birch Wood Veneer Edging Tape – 22 mm x 100 m

Cover exposed furniture-panel edges with birch wood veneer edging supplied as a 22 mm wide strip in a 100 m roll. Also called wood veneer edge banding, this edging provides a real birch surface for cabinet components, shelving and furniture repairs.

Birch has a naturally pale appearance with a fine grain. Check the veneer against adjoining panel faces where matching matters, as natural wood varies in shade and grain.

This product is supplied unglued and requires a separate compatible adhesive. Choose the bonding method to suit the veneer, substrate and application instructions.

Product Specifications

• Stock code: VEN030A
• Material: birch wood veneer
• Product format: veneer edging roll
• Strip width: 22 mm
• Roll length: 100 m
• Backing: unglued; separate adhesive required

Choosing Your Edging Width and Quantity

Measure the edge being covered before ordering. The 22 mm dimension describes the veneer strip width, rather than a guaranteed fit for a particular board thickness. Allow sufficient coverage and suitable clearance for trimming.

Calculate the combined length of the edges to be finished and allow for cuts, trimming and waste when choosing your quantity.

Application Guidance

Prepare a clean, dry, smooth and stable receiving edge. Follow the instructions for an adhesive confirmed as compatible with the veneer and substrate.

Test the fitting process on an offcut before completing the finished component. Allow the bond to set before trimming and check compatibility before applying a finishing product.

Once trimmed, the surface can be lightly sanded and finished with a compatible oil, stain, lacquer or clear coating after testing on an offcut, as birch is a natural material and grain or shade may vary between rolls.

Frequently Asked Questions

What size is this birch veneer edging roll?

The strip is 22 mm wide and supplied in a 100 m roll.

Does this edging require separate adhesive?

Yes. This unglued veneer requires a separate adhesive suitable for the veneer and receiving surface.

Is this birch edging iron-on?

No. This listing is for unglued edging, rather than edging with a heat-activated adhesive backing.

Will it match my existing birch furniture?

Natural shade and grain vary. Compare a sample against the existing surface when a close match is important.

How much edging should I order?

Measure the total length of the edges to be covered, then allow for cutting, trimming and waste. Compare that requirement with this 100 m roll.

Related Veneers and Edgings

Browse our browse veneers and edgings guide, or see the full range of wood veneer edging rolls.

Looking for a wider option? See the Birch FSHM veneer edging 50mm x 100m — supplied pre-glued with a heat-activated (hot-melt) backing, unlike this unglued 22mm roll.